Learn about accelerometers and how accelerometer data is used in telematics.

Learn how to increase the frequency of your data transmission using the Active Tracking feature.

Learn how to take advantage of the APIs available in the API Explorer Application in MyGeotab.

Leverage telematics data to detect potential collisions using the Collision Detection Add-in in My Geotab.

Learn how to use the Customer Onboarding Starter Kit to onboard new customers by automating certain tasks.

Learn more about the best practices to follow for large fleet reporting.

The purpose of this document is to provide Geotab Authorized Resellers with best practices for reporting issues to On-Call services.

Learn more about the CAN bus location and capacitive connection points for uReader devices in supported trucks and vans.

Learn more about the Geotab Centralized Identification and Access Management (CIAM) user management experience across all Geotab platforms.

Learn more about Citizen Insights, a tool that helps governments to maintain an open line of communication with their citizens while holding themselves accountable to reach desired operational targets.

Please refer to this document for ordering Cold Chain Solutions when placing order through MyAdmin.

This document is a reference guide for the power and ignition location and connection points in all supported refrigerated units (trailers).

The Cold Chain feature allows you to monitor engine data, sensor readings, and any other diagnostics data sent to the database from all assets at a glance.

Learn how to leverage telematics data to detect potential collisions using the new Collision Detection Rule in MyGeotab.

Use this document as a resource designed to provide you, our Partner, with an understanding of our connected support ecosystem.

Continuous data connection (previously referred to as Continuous Connect) is a part of the Device behavior override feature.

Take advantage of Geotab's custom map builder, a feature that allows your organization to design business-specific maps.

Learn how to integrate custom telematics devices onto the MyGeotab platform using Geotab's Gateway APIs.

This guide provides a comprehensive overview of Geotab's data residency features, their benefits, limitations, and answers to common questions.

Learn which data attributes are available for Volkswagen and Skoda.

Learn which data attributes are available with the Ford Premium and Basic device plans.

Learn which data attributes are available with the GM Premium + Driver Feedback device plan.

Learn which data attributes and data frequencies are available with Navistar Premium.

Learn which data attributes are available for Toyota and Lexus in the EU.

Learn which data attributes are available with the Volvo/Mack Regulatory and Premium device plans.

Data Sharing allows users to collaborate with trusted business partners by sharing their telematics data to other Fleet Management Application databases.

Connect a GO device to your vehicle using the HRN-RW04K4 (Differential Harness).

The DIG API provides a primary endpoint to enable integrators to send bulk custom telematics device records to MyGeotab using the /records endpoint.

Learn how to set up your company, vehicles, and drivers for Hours of Service (HOS) compliance using Geotab Drive.

Learn to use the Drive App, as part of the greater Cloud ELD solution, the Drive App (running on a compatible mobile device), is used together with a Telematics Device.

A checklist designed to help you ensure proper hardware and software installation in the Drive App.

Learn how to perform an asset inspection in the Geotab Drive App to determine if your vehicle requires repairs.

Learn how to transfer data at roadside checks, set a security PIN, and check previous asset inspections.

Learn about diagnostic and malfunction events and compliance standards for both USA and Canada.

Learn how to use the Drive App for basic driver functions such as managing HOS and performing asset inspections.

Learn how to use the Drive App to maintain Hours of Service compliance as a driver.

The Work Diary App is a work management system for drivers, with Australian rulesets. Drivers use this free-of-charge app together with a Geotab GO device to record their hours of rest or work, to minimise fatigue and aid in the completion of paper logbooks.

A customizable safety report available on the Geotab Marketplace.

Enhance your EV fleet management by learning about the features available in MyGeotab.

Browse frequently asked questions about the Electric Vehicle Suitability Assessment Add-in.

Use the EV Suitability Assessment Add-in to determine if your non-electric vehicle could be replaced by an EV.

This document provides detailed information about the Clean Truck Check program implemented by the California Air Resources Board (CARB).

Browse frequently asked questions to better understand Geotab's Emissions Diagnostics.

Using advanced analytics techniques, Geotab has developed a model capable of detecting collisions when they happen to present critical information on point of impact and magnitude.

Manufacturer self-declaration that IOX-KEYLESS conforms to EU Radio Equipment Directive requirements.

Manufacturer self-declaration that the IOX-NFCREADERA conforms to EU Radio Equipment Directive requirements.

Manufacturer self-declaration that the IOX-SATIRDv2 conforms to EU Radio Equipment Directive requirements.

Manufacturer self-declaration that the TB1-LTM conforms to EU Radio Equipment Directive requirements.

Manufacturer self-declaration that the HRN-HLAEGAH is in compliance with all applicable EU Directives, and satisfies CE marking requirements, when used for its intended purpose.

Manufacturer self-declaration that the HRN-HTKDSR is in compliance with all applicable EU Directives, and satisfies CE marking requirements, when used for its intended purpose.

Learn how to install and configure the Digital Tachograph Remote Company Card Server. The DTRCO-RCS software is critical for auto-connecting company cards to the tachograph remotely.

Learn how to use the EV Charge Assurance Add-in to help ensure your EVs are charged and diagnose charging problems.

Learn more about EV OEM integrations, including key milestones in the OEM journey and the sequence of steps needed to achieve integration.

Learn more about firmware releases and how they may affect your fleet.

This document outlines the setup process required to systematically import Fleetcor fuel card transactions into a MyGeotab database.

Connect a GO device to your vehicle using the HRN RZ04S4 (Ford EDI TUG Harness).

Use this visual aid to help you install the HRN-CL24T2 harness in your vehicle.

Learn how to set up an account and add vehicles using the Ford Telematics Modem.

Learn more about the Fuel Transaction Import Add-In, which allows users to import Fill-up transactions extracted by the fuel provider’s application/service into MyGeotab.

Browse frequently asked questions to better understand the Fuel Usage and Fill-Ups feature.

Learn how to use various fuel-saving features in MyGeotab.

Geotab Ace is an AI assistant created for users to communicate with complex datasets as if they are having a straightforward conversation, making data access more accessible and democratic.

Learn how to complete advanced installations of the GO device.

Learn how to use the Geotab Integrated Solution for Toyota and Lexus Vehicles available in MyGeotab.

The Geotab Camera Add-In for the Surfsight camera allows users to view live video feeds and video recordings, create rules and exceptions to detect distracted driving behavior and harsh driving conditions, and much more.

Geotab leverages our expertise preparing data for reporting and visualization, and makes curated data tables available in the most popular Business Intelligence tools via an easy to use connection.

This document provides a detailed definition for the columns available in each of the data assets when utilizing the Geotab Data Connector tool provided to you within the Data Schema and Dictionary resources.

Geotab’s Data Connector Maintenance Insights leverages rich data to provide clear and compelling insights on common Maintenance Issues.

The Geotab Data Connector tool was designed for Fleet Managers to import curated data from numerous Geotab data sources, sourced from their own fleet, into their preferred BI/visualization tool. The tool allows Fleet Managers to access aggregated data into a BI tool without having to manually leverage MyGeotab reports.

Geotab’s Data Connector Predictive Safety Analytics and Safety Benchmarking is an innovative approach that leverages driver behavior data and machine learning to anticipate and prevent safety incidents.

Templates provided for the Geotab Data Connector can be downloaded either from the User Guide, or directly from the Data Connector add-in page.

The Geotab Data Connector tool was designed for Fleet Managers to import curated data from numerous Geotab data sources, sourced from their own fleet, into their preferred BI/visualization tool.

Learn more about the Geotab Data-Only Plan API, which provides a wrapper around the MyGeotab .NET API.

Learn how to use Offline Mode in Geotab Drive to provide maximum access to vehicle data.

The Cloud ELD interconnects the Geotab GO telematics device and the MyGeotab fleet management software with a mobile device running the Geotab Drive app.

Learn how to use the Geotab Drive Add-In SDK, including startup, shutdown, and notifications functions.

Explore resources to help you understand the basics behind Hours of Service, ELDs, and compliance.

Browse resources and information about telematics devices, engine data, and more.

Learn more how to install the Geotab Garmin Bundle and review key technical specifications for the bundle.

Browse frequently asked questions about the Geotab Garmin Bundle, including features, billing, device admin, and more.

Learn more about the features and technical specifications of the GO Anywhere, Geotab's first generation asset tracker that allows you to maintain visibility over the Telematics Fleet Management Application.

Learn how to install a GO device in European heavy-duty vehicles using HRN-ES12S1.

Connect a GO RUGGED device to your vehicle using HRN-RW03K4.

Learn how to install HRN-RW08K1 on a generic engine control module with no available connector.

Learn how to install a GO device on a Mercedes Sprinter using HRN-UP21Y2.

A comprehensive manual for resellers and customers to successfully implement the International Fuel Tax Agreement (IFTA).

Learn how to use the Geotab Integrated Solution for International Trucks available in MyGeotab.

Geotab leverages our expertise preparing data for reporting and visualization, and makes curated data tables available in the most popular Business Intelligence tools via an easy to use connection.

Learn how to use the Geotab Integrated Solution for Volvo Trucks available in MyGeotab. This document is intended for Partners, and includes all essential information needed to use the Geotab Integration Solution.

Learn which data attributes are available with the Volvo device plans.

Learn more about the Geotab Integrated Solution for Volkswagen Group allows customers to view data from Volkswagen Group factory-fit devices in Geotab.

The Geotab Integrations: Software and Hardware Technical Toolkit reference guide provides a comprehensive toolkit to help you build effective integrations with Geotab using both software and hardware.

Learn more about the Geotab Keyless SDK Logging pre-release.

The Geotab Keyless System allows for the simultaneous storage of up to four distinct stored Virtual Keys (reservations) locally on the GO device that can be accessed via Geotab Keyless NFC tags (tapCards).

Learn more about the Geotab Keyless SDK Logging Schema.

Learn more about the Geotab Keyless Starter Inhibit feature, including how to install it using the HRN-CX10S4 harness.

This document contains all the essential information that you, the Partner, need to use the Geotab Marketplace Order Now program to facilitate purchases of Geotab and third-party products.

The Geotab Marketplace Order Now Program facilitates the purchases of hardware, software, and GO9 devices.

Partners can use the Demo Preview database to explore business opportunities with prospective Customers.

At Geotab, we work hard to build safe and reliable tools that make sense for your business, and your feedback is an essential part of that process. Geotab’s MyPreview federation is available for our Customers and Partners to access pre-production releases of MyGeotab and Geotab Drive.

This document answers common questions regarding the Surfsight camera kit available through the Geotab Order Now Program.

Browse frequently asked questions about the return process at Geotab.

Review installation instructions for GO devices and IOXs, and access more resources in the documentation library.

With the dash cam, you can harness the power of video to connect your fleet vehicles, help protect your drivers on the road, and save lives.

Learn how to obtain OBD-II or J1939 fault codes from MyGeotab FaultData objects.

Browse frequently asked questions about the installation process for GO9 and GO9 Rugged devices.

Learn how to prepare the GO device for Rail Service installation, including an overview of the Hi-Rail install process with images.

This document provides information on how to successfully troubleshoot a faulty GO Device.

This document outlines the installation and setup process for the new Geotab GO Focus tracking device.

Learn how to de-pin and re-pin a GO RUGGED device.

Learn more about how a GO telematics device obtains latitude, longitude, altitude, and speed coordinates directly from the applicable GPS chipset (“GPS Chipset”) embedded in the GO telematics device.

Learn how to safely install your telematics device.

Learn about the features and technical specifications of the GO7 RUGGED, a ruggedized telematics device.

Learn more about the features and technical specifications of the Geotab GO7 device.

Use this visual aid to help you install a GO8 device in your vehicle.

Learn about the features and technical specifications of the GO8 RUGGED, a ruggedized telematics device.

Learn more about the features and technical specifications of the Geotab GO8 device.

Follow this installation guide to install and verify a GO9 device in your vehicle.

Use this visual aid to help you install a GO9 device in your vehicle.

Learn how to install a GO9 in the Mitsubishi Fuso 2010-2021 using the HRN-GS16K2 and HRN-BU16Y5 harnesses.

Learn how to install the GO RUGGED device in your vehicle.

Learn about the features and technical specifications of the GO9 RUGGED, a ruggedized telematics device.

Learn more about the features and technical specifications of the Geotab GO9 device.

Follow this installation guide to install and verify a GO9+ device in your vehicle.

Browse frequently asked questions about the GO9+ device installation process.

Use this visual aid to help you install a GO9+ device showing visual references for the installation process, including a diagram of the device, harness, and labels in the box.

Learn more about the technical specifications and features of the GO9+ device, an expandable device with Wi-Fi hotspot.

Follow this installation guide to install and verify a GO9B device in your vehicle.

Follow this installation guide to install and verify a GO9B device in your vehicle.

Browse frequently asked questions about the GoAnalytics, a powerful analytical tool crafted to deliver comprehensive analysis and visualizations of fleet-related data.

This document provides an overview of how to navigate and use the GoAnalytics platform.

Learn more about using harnesses to connect a GO device to your vehicle.

Browse harness types and review harnesses for specific use cases.

Learn more about the Hours of Service rulesets and exemptions supported by MyGeotab.

Connect a GO device to your vehicle using HRN-BD16S1.

Use this visual aid to help you install HRN-CE04A4 in your vehicle.

Connect a GO device to your 2019+ Mack truck using HRN-CE10K2 and HRN-CM24Y1 harnesses.

Connect a GO device to your 2019+ Mack (MR Series) Cab Over vehicle using HRN-ES12S1.

Connect a GO device to your Hino truck using HRN-CM24Y1 and HRN-CH06A2 harnesses.

Connect a GO device to your 2019+ Hino truck using HRN-CM24Y1 and HRN-CH10A2 harnesses.

Connect a GO device to your Isuzu vehicle using the HRN-CM24Y1 and HRN-CI04A2 harnesses.

Connect a GO9 device to your Mercedes Sprinter 2500 using HRN-CM24Y1 HRN-CP04A2 harnesses.

Connect a GO device to your vehicle using the HRN-CS14S21 harness.

Connect a GO device to your vehicle using HRN-CS14T2.

Learn more about connecting a GO device to vehicles without a diagnostic port using the HRN-CW03K3 harness.

Use this visual aid to help you install HRN-CW08K4 in your vehicle.

Learn how to connect an IOX using the HRN-IOXEXT IOX extension cable.

Connect a GO RUGGED device to your Komatsu vehicle using the HRN-RC12T2 harness.

Connect a GO RUGGED device to your vehicle using the HRN-RW07T1 harness.

Connect a GO device to your vehicle using the HRN-RZ04T4 (Kubota TUG Harness).

Connect HRN-TNULL to compatible cameras.

Connect a GO Device to your 2019 and later Volvo vehicle using HRN-CE10K2 and HRN-CM24Y1 harnesses.

Partners can order installation services from Geotab. When these services are ordered, Geotab will work with the Partner, Customer, and Geotab Authorized Installer to ensure installations are performed efficiently and in accordance with Geotab's standards.

Use Geotab's email and online tools to help successfully complete installations on the first try.

Geotab Authorized Installers use the Partner Community site to manage Work Orders (WO) assigned to them by Geotab. This document provides an introduction to the Partner Community and how to use it.

Learn more about IOX-ALERT, which allows a driver to send a notification to a dispatcher by pressing an alert button.

Learn more about IOX-ANALOG, which enables the GO device to read analog signals from a vehicle and its connected accessories.

Learn more about IOX-AUXM, which monitors up to 8 signals from your vehicle in real-time.

Learn more about IOX-BATTERY, a battery backup solution for GO9 devices and GO9 RUGGED devices (with adapter).

Learn more about IOX-BT, which monitors Bluetooth proximity beacons and supports select sensor-enabled beacons.

Learn more about IOX-BUZZ, an external buzzer which amplifies in-vehicle audio feedback from the GO device.

Learn more about IOX-CAN, which integrates third-party data with MyGeotab software, allowing supplementary fleet data collection.

IOX-COLD allows the GO device to read and download real-time data from digital tachographs. This data can then be viewed and analyzed in the Geotab Tachograph Module for the MyGeotab platform.

Refrigeration unit data can then be viewed and analyzed in the Asset Monitoring view in the MyGeotab platform.

The connection to a thermograph is achieved using the harness HRN-CCTH (IOX-COLD) or HRN-RCCTH (IOX-COLD RUGGED).

This document provides an overview of various expansion solutions compatible with the IOX-COLD.

The IOX-COLD RUGGED device is an IP-rated version of the IOX-COLD. Its main objective is to support Cold Chain solutions on Refrigerated Trailers.

The IOX-COLD is a multipurpose IOX™ that supports Tachograph, Cold Chain transportation data logging and general expandability for the GO device.

Learn more about IOX-COMSPREAD, which allows solid and liquid material controllers to send data to MyGeotab.

Learn more about IOX-CRS, which allows the CIRUS CONTROLS SpreadSmart Rx system to send data to MyGeotab via a GO device.

Learn more about IOX-DJ, which allows the DICKEY-john Control Point control system to send data to MyGeotab via a GO device.

Learn more about IOX-GOTALK/IOX-GOTALKA, which provides real-time feedback to drivers about their performance to improve driving.

The IOX-KEYBOX allows remote access to a vehicle without requiring an embedded key or digital OEM support. The device supports multiple markets including corporate car sharing, consumer car sharing, and traditional car rental services.

Learn more about IOX-KEYLESS, which supports remote access to a vehicle and supports multiple markets.

Learn more about IOX-NFCREADERA, which integrates Near Field Communication (NFC) with the GO device to identify drivers.

Learn more about IOX-OUTPUTM, which allows a GO device to control a relay from the vehicle in real-time.

The IOX-RS232 allows external devices — gas detection monitors, weighing scales, or pressure monitors — to send data through the Geotab® GO™ device to MyGeotab™.

Learn more about IOX-SATIRDv2, which allows GO devices to communicate over the IRIDIUM Network.

Learn how the IOX-UREADER supports tachograph, contactless CAN clamp, and cold chain transportation data logging functionality.

Learn how to install the IOX-UREADER, including how to install CAN bus clamps and Cold Chain IP boxes.

Learn more about IOX-USB, which includes an auxiliary USB power adapter for charging and powering USB devices.

Learn more about IOX-WRKS, a Public Works solution focusing on vehicles in the winter operations.

Learn how to install a GO device in your winter operations vehicle using the IOX-WRKS solution.

Learn the best practices for the placement and installation of sensors used in the IOX-WRKS solution.

Use this visual aid to help you install the IOX-WRKS solution in your vehicle.

Learn how to implement the J1939 signal set for GO device compatibility.

Learn more about the full suite of IOX-KEYLESS documentation, including installation of GO9 devices with a T-harness, NFC readers, and Start Inhibit.

The Keyless Lite Solution by Geotab enables your fleet to easily share vehicles – locate, unlock and lock – from a simple mobile phone application using virtual keys.

Keyless Monitor is a MyGeotab Add-In enabling Integrators, Partners, and Customers to configure, control, and monitor Geotab Keyless hardware.

Keyless Monitor is a MyGeotab Add-In enabling Integrators, Partners, and Customers to configure, control, and monitor Geotab Keyless hardware.

Learn more about the limitations of use for GO devices.

A list of the vehicles requiring the ALDL Shunt, categorized according to year, make, and model.

The Maintenance Operations page simplifies Work Order Management by streamlining your maintenance processes and ensuring the longevity of your assets.

This feature provides a seamless experience for completing maintenance tasks and ensuring that your vehicles and assets are always in top condition.

Learn more about using MyAdmin for orders, shipments, account and device administration, and RMAs.

This document provides a list of release notes for each software release, including bug fixes and functionality improvements.

Learn more about the Alpha Testing Server, which allows select users to access pre-production releases of MyGeotab.

Learn more about the MyGeotab API Adapter, which allows streaming of data from MyGeotab into external systems.

Learn more about how MyGeotab supports Single Sign-On (SSO) user authentication via the SAML 2.0 specification.

Learn how to pull and utilize Geotab vehicle data collected from Electric Vehicles (EVs).

Learn how to use the MyInstall tool, including how to create MyInstall logins and perform device installation checks.

Browse frequently asked questions about the On-Board Diagnostic port and telematics devices.

The Order Now Product Catalog lists all the products that are currently available for Customers to purchase through the Order Now Program.

Learn how Fleet Managers can use the ORIGOInspect Dashboard to identify potential issues early, helping reduce maintenance costs and keeps vehicles on the road, minimizing downtime due to preventable violations.

This document answers common questions regarding the Geotab and Mercedes-Benz Connectivity Services (MBCS) Integrated Solution available in MyGeotab.

Learn how to use the Geotab Integrated Solution for for Mack Connected Volvo Vehicles available in MyGeotab.

The Geotab Integrated Solution for Autocar facilitates communication between third-party telematics devices and the MyGeotab database, allowing customers to view vehicle data from third-party devices in MyGeotab.

Learn how to use the Geotab Integrated Solution for BMW and Mini Vehicles available in MyGeotab.

This document answers common questions regarding the Geotab Integrated Solution for Caterpillar. Our intention is to support you, the Geotab Partner, by providing all the essential information related to this solution.

Learn how to use the Geotab Integrated Solution for Ford Vehicles available in MyGeotab.

Learn how to use the Geotab Integrated Solution for Freightliner Vehicles available in MyGeotab.

Learn how to use the Geotab Integrated Solution for GM available in MyGeotab.

This document answers common questions regarding the Geotab Integrated Solution for Hino. Our goal is to support you, the Partner, by providing the essential information related to this solution.

Learn how to use the Geotab Integrated Solution for John Deere Vehicles available in MyGeotab.

Learn how to use the Geotab Integrated Solution for Komastsu Vehicles available in MyGeotab.

Learn how to use the Geotab Integrated Solution for for Mobilisights/Stellantis (Europe only) Vehicles available in MyGeotab.

This document answers common questions regarding the Geotab Integrated Solution for Renault. Our goal is to support you, the Partner, by providing the essential information related to this solution.

Learn how to use the Geotab Integrated Solution for for Stellantis (USA & Canada only) Vehicles available in MyGeotab.

This document answers common questions regarding the Geotab Integrated Solution for Vermeer. Our intention is to support you, the Geotab Partner, by providing all the essential information related to this solution.

Learn more about Personal Mode, which allows drivers and fleet managers to temporarily hide vehicle tracking in MyGeotab.

Phillips Connect asset trackers collect data on location and asset health, as well as driving behavior and fleet productivity with unparalleled asset utilization metrics that drive financial ROI.

A comprehensive guide to the Telematics Fleet Management Application and the available tools for managing the data sent by the GO device.

This document is the installation guide for Carrier Neos, Zephyr, and Viento units. This document provides technical information, installation instructions, and the procedure to install the GO device, IOX-COLD, and communication protocol harness.

This document describes how to integrate the Cold Chain solution with Carrier Supra units.

This document provides technical information, installation instructions, the procedure to install the GO device, GEO-CCIPBOX or IOX-COLD RUGGED, and important safety information for integrating the telematics solution with Carrier Vector, Maxima, or Ultra controllers.

This document is the installation guide for Carrier X2100A. This document provides technical information, installation instructions, the procedure to install the GO device, GEO-CCIPBOX or IOX-COLD RUGGED, and important safety information.

This document is the installation guide for integrating the telematics solution with Carrier Xarios and Pulsor units. This document provides technical information, installation instructions, and important safety information.

This document provides technical information, installation instructions, the procedure to install the GO device, and important safety information for integrating the telematics solution with GAH units that have a LAE AH1-5B14L-AG controller.

This document describes how to integrate the Cold Chain solution with Hwasung Thermo units. This document provides technical information, installation instructions, and the procedure to install the GO device, IOX-UREADER or IOX-COLD, and communication protocol harness.

This document provides technical information, installation instructions, and the procedure to install the GO device, GEO-CCIPBOX or IOX-COLD RUGGED, and communication protocol harness.

This document is the installation guide for Thermo King trailer unit models (with Thermoguard IV and V controllers). This document provides technical information, installation instructions, and the procedure to install the GO device, GEO-CCIPBOX or IOX-COLD RUGGED, and communication protocol harness.

This document is the installation guide for Thermo King trailer unit models (with Thermoguard VI controllers). This document provides technical information, installation instructions, and the procedure to install the GO device, GEO-CCIPBOX or IOX-COLD RUGGED, and communication protocol harness.

This document describes how to integrate the Cold Chain solution with Thermo King TSR-2 and TSR-3 controllers.

This document is the installation guide for integrating the telematics solution with Thermo King DSR units. This document provides technical information, installation instructions, the procedure to install the GO device, and important safety information.

Learn how to interface with various spreader controllers commonly installed by Public Works agencies.

This reference guide outlines the features within the Fleet Management Application that can benefit Public Works fleets and, subsequently, any fleet.

Learn how to set up a database and install and provision the IOX-WRKS for a Public Works Customer.

Connect a GO device to your vehicle using the HRN-RW03K5 (Pulse Harness).

This user guide describes the Purge feature in the Fleet Management Application, outlining how to use the feature, categories for purge, retention time periods, and FAQs.

Ordering IOX Keyless means you are purchasing the IOX-KEYLESS hardware fully integrated with your vehicle keys.

Learn more about the Keyless is Geotab’s Shared Mobility solution. There are a few components you need to know, so use this document to guide your MyAdmin purchases and quoting.

This document outlines how to configure the remote debugging environment for the Raspberry Pi 4 board for deployment.

Learn more about the features available with the Base, Regulatory, Pro, and ProPlus Rate Plans.

Learn which GO Device features are available with the Ford Basic and Ford Premium rate plans.

Learn more about the GO device features available with GM Premium and GM Premium + Driver Feedback Rate Plans.

Learn which GO device features are available with the Navistar Premium Rate Plan.

Learn how to install the Roadside Add-in in MyGeotab, a solution for requesting help for a fleet vehicle.

Learn more about Route Completion configuration using a shapefile import.

This user guide provides the necessary information needed in order to use the Routes feature in the Fleet Management Application.

This document functions as a reference guide for the Routing & Optimization – Administration module in Fleet Management Application.

This document functions as a reference guide for the Routing & Optimization – Dispatch module in the Fleet Management Application.

This document serves as a reference guide for the Routing & Optimization – Route module in the Fleet Management Application.

This document functions as a reference guide for the Routing & Optimization – Mobile module in the Fleet Management Application.

This document functions as a reference guide for the Routing & Optimization – Territory module in the Fleet Management Application.

Learn how to install the Rugged device, designed to withstand exposure to weather elements and environmental particulates.

This guide can be used by any user to add and edit custom rules in the Fleet Management Application.

Browse frequently asked questions about the Ruleset Switcher Add-in in the Drive App.

Safety Center is used by Fleet Administrators who have access to entire fleets or groups of fleets to manage safety risks, and make decisions based on objective safety data, such as predictive collision risk.

Service accounts are functionally similar to real user accounts in the MyGeotab database.

Review the technical specs for SPR-RELAYKIT, which incorporates controls for enabling a relay directly from the GO device.

The HRN-GS16K22-A harness kit is designed and intended for use only with the GO device or Geotab-authorized accessory devices.

The HRN-GS16K22-A harness kit is designed and intended for use only with the GO device or Geotab-authorized accessory devices.

Learn how Substance Spreader controllers transmit data to MyGeotab.

Learn how the Sustainability Center is used by Fleet Administrators who have access to entire fleets to review trends, and make decisions based on objective energy and fuel data.

Connect a GO device to your heavy-duty vehicle using a HRN-GS09K2 harness.

This document outlines how the Ethernet networks in vehicles allow certain vehicle systems to transmit larger amounts of data at faster speeds compared to CAN networks.

This document provides all the information necessary to successfully deploy a customer’s Tachograph solution. Customers, Partners, and Support can follow the steps described in this guide.

Learn how the Tachograph Add-in helps you control and analyze the info generated by vehicles and drivers in your fleet.

Learn how to install a GO9 device in the Tesla Model Y using the HRN-CT26T1 harness.

The purpose of this document is to provide all the information necessary to successfully deploy a customer’s Cold Chain solution, so either our Partners or our Support team can help with the steps required.

This document is a reference guide to help you identify the refrigeration unit make and model, and its controller type based on the type of installation.

Manufacturer self-declaration that IOX-KEYLESS conforms to UKCA regulations.

Manufacturer self-declaration that IOX-NFCREADERA conforms to UKCA regulations.

Manufacturer self-declaration that the HRN-HLAEGAH is in compliance with all applicable UKCA regulations, when used for its intended purpose.

Manufacturer self-declaration that the HRN-HTKDSR is in compliance with all applicable UKCA regulations, when used for its intended purpose.

Learn more about the HRN-GS16K2 harness, used to connect GO devices to light- and medium-duty vehicles internationally.

Use this visual aid to help you install the HRN-GS16K2 universal harness kit in your vehicle.

Use this visual aid to help you install the HRN-GS09K2 harness in your vehicle.

Learn more about the HRN-GR09K1, a ruggedized harness kit used to connect GO RUGGED devices to vehicles internationally.

Use this visual aid to help you install the HRN-GR09K1 harness in your vehicle.

Learn how to validate the configuration of uReaderGPS and IOX-UREADER devices using the uReader Device Installation Wizard.

Learn more about the details and use cases behind the Ignore HOS logs feature of the ELD solution.

Browse additional notes on installations and vehicles, including installation notes on specific harnesses and hardware selection for different physical environments.

This document outlines the setup process required to systematically import Voyager fuel card transactions into a MyGeotab database.

This document outlines the setup process required to systematically import WEX and EFS fuel card transactions into a MyGeotab database.

The Work Order Management is designed to streamline your maintenance processes and ensure the longevity of your assets.

Learn how to systematically import WEX fuel card transactions into a MyGeotab database.