Support Document

0 mins to read

User Guide

October 2023


Introduction

Using advanced analytics techniques, the Data and Analytics Research team has developed a model capable of detecting collisions when they happen to present critical information on point of impact and magnitude. This allows you to monitor, act, and take measures to mitigate future collisions.

The Enhanced Accelerometer Experiment Add-In uses an improved accelerometer threshold to detect potential collisions, and captures feedback from users to achieve enhanced accuracy and precision in collision detection.

The Enhanced Accelerometer Experiment page includes the following features:

  1. Search for recorded acceleration events — Narrow down the list of collision detection events. Refer to Finding recorded acceleration events for more information.
  2. List of recorded acceleration events — Provides a quick overview of vehicles, date and time of event, and impact for the associated event.
  3. Provide feedback — Flexibility of providing one-click feedback, and/or adding more information to a report for which you have previously submitted feedback.

Getting Started

Accessing the Enhanced Accelerometer Experiment Add-In

To access the Enhanced Accelerometer Experiment Add-In, follow these steps:

  1. Navigate to Dashboard & Analytics > Analytics Lab from the MyGeotab main menu.
  2. Find Enhanced Accelerometer Experiment, then select Launch experiment.

The Enhanced Accelerometer Experiment page is displayed.

You can now access the Enhanced Accelerometer Experiment Add-In via Dashboards & Analytics > Enhanced Accelerometer Experiment.

document Image

Recorded Acceleration Events

The Enhanced Accelerometer Experiment Add-In is designed to detect when a vehicle’s accelerometer reaches a magnitude of 1.5g and over. When this is detected, an event is recorded for your review.

Finding recorded acceleration events

You can use filters to narrow down the list of recorded acceleration events.

document Image

To narrow down the list of recorded acceleration events, follow these steps.

  1. Navigate to Dashboards & Analytics > Enhanced Accelerometer Experiment.
  2. Use the following filters to narrow down the list of recorded acceleration events:
  3. ✱ NOTE: Select More to open filters if it’s not displayed.

    1. Date range — Select a date range. You can also select the days of the week.
    2. ✱ NOTE: Select View all events to view a list of all potential collisions.

    3. Search — Enter or select a vehicle name, VIN, or group.

The list of recorded acceleration events updates based on your filter selections.

✱ NOTE: You can use Sort to sort the list by Name, and Date.

Enhanced Accelerometer Experiment overview

By default, the Enhanced Accelerometer Experiment page displays a list of all detected collisions.

document Image

The following information is displayed on the Action Needed and Reviewed tabs.

Label

Description

Vehicle Name

Displays the name of the vehicle as configured on the Vehicles & Assets page.

Also displays the VIN and Vehicle Groups, if applicable.

Date and Time

Displays the date and time when the recorded acceleration event was identified in Eastern Standard Time (EST).

Event Address

Displays the address or city where the recorded acceleration event was detected.

Impact

Displays where the collision impact was detected on the vehicle, if applicable.

Collision Occurred (Yes/No)

On the Action Needed tab, this column displays the following buttons:

  1. Yes — Select Yes to report that there was a collision.
  2. No — Select No to report that there was no collision.
  3. On the Reviewed tab, this column displays the feedback you previously submitted on the Action Needed tab. You can select Edit to provide additional information.

    document Image

Action Needed

By default, the Action Needed tab displays vehicles that have met the accelerometer threshold to be a potential collision, and require your feedback. A number is also displayed next to Action Needed to show you how many recorded acceleration events require your feedback.

To find detected collisions within a specific time period, refer to Finding recorded acceleration events.

To provide feedback for recorded acceleration, follow these steps:

    1. Navigate to Dashboards & Analytics > Enhanced Accelerometer Experiment.
    2. Use the following filters to narrow down the list of recorded acceleration events:
    3. ✱ NOTE: Select More to open filters if it’s not displayed.

      1. Date range — Select a date range. You can also select the days of the week.
      2. ✱ NOTE: Select View all events to view a list of all potential collisions.

      3. Search — Enter or select a vehicle name, VIN, or group.
      4. The list of recorded acceleration events updates based on your filter selections.

        ✱ NOTE: You can use Sort to sort the list by Name, and Date.

    4. Under the Collision Occurred (Yes/No) column for the corresponding event, select Yes to report that there was a collision, or No to report that there was no collision.

    document Image

    You have successfully provided feedback on a recorded acceleration event.

    When an event has been reviewed, it will be displayed in the Reviewed tab.

    Reviewed

    The Reviewed tab displays a list of recorded acceleration events that you have previously submitted feedback on. In this tab, you can provide additional information about the event.

    To provide more details for an event, follow these steps:

    1. Navigate to Dashboards & Analytics > Enhanced Accelerometer Experiment.
    2. Select the Reviewed tab.
    3. A list of recorded acceleration events you previously provided feedback on is displayed.

    4. Use the following filters to narrow down the list of recorded acceleration events:
    5. ✱ NOTE: Select More to open filters if it’s not displayed.

      1. Date range — Select a date range. You can also select the days of the week.
      2. Search — Enter or select a vehicle name, VIN, or group.
      3. The list of recorded acceleration events updates based on your filter selections.

        ✱ NOTE: You can use Sort to sort the list by Vehicle Name, and Date.

    6. Select Edit for the corresponding recorded acceleration event to provide more details.
    7. The Add or Edit Collision Details popup window is displayed.

      document Image

    8. (Optional) You can change or update Did this collision occur?.
    9. Complete the questionnaire, then select Apply changes.

    You have successfully provided additional information on a recorded acceleration event.

    Viewing more details on an event

    Use Finding recorded acceleration events to narrow down the list of recorded acceleration events, then select the Vehicle Name.

    The page refreshes to provide more details on the selected vehicle’s recorded acceleration event and a map view of where the recorded acceleration event was detected.

    Use Center on map to move the map back to the location where the vehicle collision was detected, or Back to return to the Enhanced Accelerometer Experiment page.


    Overview


    1. Status — Displays one of the following statuses:
      1. Review and confirmation needed — Displays if the recorded acceleration event has not been reviewed. Select Review and confirm to provide more information.
      2. Reviewed and confirmed — Displays if the recorded acceleration event has been reviewed. Select Add or edit collision details to update the information.
    2. Review and confirm — Select Review and confirm to review additional information about the recorded acceleration event.
    3. ✱ NOTE: The Review and confirm button is only displayed when details are accessed from the Action Needed tab.

    4. Add or edit collision details — Select Add or edit collision details to add additional details to the recorded acceleration event, such as the location of collision, damage cost estimates, and impact point on the vehicle.

    ✱ NOTE: The Add or edit collision details button is only displayed when details are accessed from the Reviewed tab.

    1. Vehicle groups — Displays any group(s) that the vehicle is associated with.

    Details


    1. Did this collision occur? — Displays one of the following:
      1. Yes — Displays Yes if a user has confirmed there was a collision.
      2. No — Displays No if a user has confirmed there was no collision.
    2. Date and time identified — Displays the date and time when the recorded acceleration event was identified in Eastern Standard Time (EST).
    3. Address of collision — Displays the city where the collision was detected.
    4. Cost of damage — Displays the cost of damage, if applicable.
    5. Points of impact — Displays points of impact on the vehicle, if applicable.

    Summary


    1. Text Summary — Displays a brief description of the recorded acceleration event, with details such as the recorded speed of the vehicle, impact point, magnitude measurement, and more.
    2. Collision Details — Displays additional details of the recorded acceleration event.
    3. Was this a collision? — Displays the following buttons if accessed from the Action Needed tab:
      1. Yes — Select Yes to report that there was a collision.
      2. No — Select No to report that there was no collision.

    Manually Reported

    The Manually Reported tab displays a list of manually reported collisions submitted through the Report a collision button. Refer to Reporting a collision manually for more information.

    The following information is displayed on the Manually Reported tab.

    Column

    Description

    Vehicle VIN

    Displays the vehicle identification number (VIN) of the vehicle in the reported collision, based on the Manual Collision Report.

    Date and Time

    Displays the date and time of the collision, based on the Manual Collision Report.

    Event Address

    Displays the address or city where the collision occurred, based on the submitted Manual Collision Report.

    Cost

    Displays cost of damages based on the submitted Manual Collision Report, if applicable.

    Impact

    Displays the location of the collision impact, based on the submitted Manual Collision Report, if applicable.

    Actions

    Displays the following buttons:

    1. Edit – Select Edit to edit the Manual Collision Report.
    2. Delete — Select Delete to remove the Manual Collision Report.

    Reporting a collision manually

    The Enhanced Accelerometer Add-In allows you to manually report or capture a collision, in the event that it does not meet the criteria to be added automatically.

    To report a collision manually, follow these steps:

    1. Navigate to Dashboards & Analytics > Enhanced Accelerometer Experiment.
    2. Select Report a collision.
    3. The Manual Collision Report popup window is displayed.

      document Image

    4. Complete the following mandatory fields:
      1. What’s the VIN number of your vehicle?
      2. Where did the collision occur?
      3. When did the collision occur?
    5. (Optional) Provide responses for the remaining questions.
    6. Select Submit.

    You have successfully reported a collision manually. The collision is displayed under the Manually Reported tab.

    Understanding Activity Summary

    The Activity Summary side panel provides a quick overview of event activity and key metrics.

    ✱ NOTE: Select Metrics to open the Activity Summary panel. Close the panel by selecting X.

    document Image

    Probable Collision Events Detected

    The Probable Collision Events Detected section shows the number of recorded acceleration events that have been detected, including reviewed events:

    1. Total — Displays the cumulative number of recorded acceleration events that have been detected (including reviewed events).
    2. Last 30 days — Displays the number of recorded acceleration events that have been detected (including reviewed events) in the last 30 days.

    Probable Collision Events Reviewed

    The Probable Collision Events Reviewed section shows the number of recorded acceleration events that have been reviewed by Administrators.

    1. Total — Displays the cumulative number of recorded acceleration events that have been reviewed.
    2. Last 30 days — Displays the number of recorded acceleration events that have been reviewed.

    Overall Accuracy of Model

    The Overall Accuracy of Model section shows the percentage of events that were correctly identified as true positives or true negatives from the total number of detected events.

    Top Five Cities or Towns

    The Top Five Cities or Towns section shows the highest total number of probable collision events in the displayed cities and/or towns, and the number of recorded acceleration events for each corresponding city or town.

    scroll-up