Learn about accelerometers and how accelerometer data is used in telematics.

The purpose of the Device Status is to provide information about device health and help you troubleshoot any connectivity issues.

Learn how to set up your company, vehicles, and drivers for Hours of Service (HOS) compliance using Geotab Drive.

Learn to use the Drive App, as part of the greater Cloud ELD solution, the Drive App (running on a compatible mobile device), is used together with a Telematics Device.

A checklist designed to help you ensure proper hardware and software installation in the Drive App.

Learn how to perform an asset inspection in the Geotab Drive App to determine if your vehicle requires repairs.

Learn how to transfer data at roadside checks, set a security PIN, and check previous asset inspections.

Learn about diagnostic and malfunction events and compliance standards for both USA and Canada.

Learn how to use the Drive App for basic driver functions such as managing HOS and performing asset inspections.

Learn how to use the Drive App to maintain Hours of Service compliance as a driver.

The Work Diary App is a work management system for drivers, with Australian rulesets. Drivers use this free-of-charge app together with a Geotab GO device to record their hours of rest or work, to minimise fatigue and aid in the completion of paper logbooks.

Using advanced analytics techniques, Geotab has developed a model capable of detecting collisions when they happen to present critical information on point of impact and magnitude.

Manufacturer self-declaration that the GO9-3G device conforms to EU Radio Equipment Directive requirements.

Manufacturer self-declaration that the GO9-LTM device conforms to EU Radio Equipment Directive requirements.

Manufacturer self-declaration that the GP9-LTE device conforms to EU Radio Equipment Directive requirements.

Manufacturer self-declaration that the GR9-3G device conforms to EU Radio Equipment Directive requirements.

Manufacturer self-declaration that the GR9-LTM device conforms to EU Radio Equipment Directive requirements.

Manufacturer self-declaration that the HRN-KEYBOXV2 Inline Harness conforms to CE / EU Directive requirements.

Manufacturer self-declaration that the HRN-HLAEGAH is in compliance with all applicable EU Directives, and satisfies CE marking requirements, when used for its intended purpose.

Manufacturer self-declaration that the HRN-HTKDSR is in compliance with all applicable EU Directives, and satisfies CE marking requirements, when used for its intended purpose.

Learn more about firmware releases and how they may affect your fleet.

Geotab Ace is an AI assistant created for users to communicate with complex datasets as if they are having a straightforward conversation, making data access more accessible and democratic.

Learn how to use Offline Mode in Geotab Drive to provide maximum access to vehicle data.

Explore resources to help you understand the basics behind Hours of Service, ELDs, and compliance.

Browse resources and information about telematics devices, engine data, and more.

Learn more how to install the Geotab Garmin Bundle and review key technical specifications for the bundle.

Browse frequently asked questions about the Geotab Garmin Bundle, including features, billing, device admin, and more.

Learn more about the features and technical specifications of the GO Anywhere, Geotab's first generation asset tracker that allows you to maintain visibility over the Telematics Fleet Management Application.

The Geotab Keyless System allows for the simultaneous storage of up to four distinct stored Virtual Keys (reservations) locally on the GO device that can be accessed via Geotab Keyless NFC tags (tapCards).

Learn more about the Geotab Keyless Starter Inhibit feature, including how to install it using the HRN-CX10S4 harness.

This document contains all the essential information that you, the Partner, need to use the Geotab Marketplace Order Now program to facilitate purchases of Geotab and third-party products.

This document answers common questions regarding the Surfsight camera kit available through the Geotab Order Now Program.

Browse frequently asked questions about the return process at Geotab.

Learn how to prepare the GO device for Rail Service installation, including an overview of the Hi-Rail install process with images.

This document provides information on how to successfully troubleshoot a faulty GO Device.

The GO Focus Plus combines advanced artificial intelligence, Advanced Driver Assistance Systems (ADAS), Driver Monitoring Systems (DMS), and telematics data into one intelligent dash cam designed to improve fleet safety.

This document outlines the installation and setup process for the new Geotab GO Focus tracking device.

Learn more about how a GO telematics device obtains latitude, longitude, altitude, and speed coordinates directly from the applicable GPS chipset (“GPS Chipset”) embedded in the GO telematics device.

Learn more about the features and technical specifications of the Geotab GO8 device.

Learn how to install the GO RUGGED device in your vehicle.

Learn about the features and technical specifications of the GO9 RUGGED, a ruggedized telematics device.

Learn more about the features and technical specifications of the Geotab GO9 device.

Browse frequently asked questions about the GO9+ device installation process.

Learn more about the technical specifications and features of the GO9+ device, an expandable device with Wi-Fi hotspot.

Follow this installation guide to install and verify a GO9B device in your vehicle.

This guide provides insight into the journey of fulfilling an Order Now (ON) purchase through the Geotab Marketplace, including the customer purchase, Partner approval and integrator fulfillment.

Learn more about using harnesses to connect a GO device to your vehicle.

Browse harness types and review harnesses for specific use cases.

Connect a GO device to your vehicle using HRN-BD16S1.

Partners can order installation services from Geotab. When these services are ordered, Geotab will work with the Partner, Customer, and Geotab Authorized Installer to ensure installations are performed efficiently and in accordance with Geotab's standards.

Geotab Authorized Installers use the Partner Community site to manage Work Orders (WO) assigned to them by Geotab. This document provides an introduction to the Partner Community and how to use it.

Learn how to implement the J1939 signal set for GO device compatibility.

The Keyless Lite Solution by Geotab enables your fleet to easily share vehicles – locate, unlock and lock – from a simple mobile phone application using virtual keys.

Keyless Monitor is a MyGeotab Add-In enabling Integrators, Partners, and Customers to configure, control, and monitor Geotab Keyless hardware.

Learn more about the limitations of use for GO devices.

Learn more about how MyGeotab supports Single Sign-On (SSO) user authentication via the SAML 2.0 specification.

Learn how to use the MyInstall tool, including how to create MyInstall logins and perform device installation checks.

Browse frequently asked questions about the On-Board Diagnostic port and telematics devices.

The Order Now Product Catalog lists all the products that are currently available for Customers to purchase through the Order Now Program.

Learn how Fleet Managers can use the ORIGOInspect Dashboard to identify potential issues early, helping reduce maintenance costs and keeps vehicles on the road, minimizing downtime due to preventable violations.

Browse frequently asked questions about the Ruleset Switcher Add-in in the Drive App.

Safety Center is used by Fleet Administrators who have access to entire fleets or groups of fleets to manage safety risks, and make decisions based on objective safety data, such as predictive collision risk.

Review the technical specs for SPR-RELAYKIT, which incorporates controls for enabling a relay directly from the GO device.

The HRN-GS16K22-A harness kit is designed and intended for use only with the GO device or Geotab-authorized accessory devices.

Learn how the Sustainability Center is used by Fleet Administrators who have access to entire fleets to review trends, and make decisions based on objective energy and fuel data.

Connect a GO device to your heavy-duty vehicle using a HRN-GS09K2 harness.

Manufacturer self-declaration that the HRN-KEYBOXV2 Inline Harness conforms to UKCA regulations.

Manufacturer self-declaration that the HRN-HLAEGAH is in compliance with all applicable UKCA regulations, when used for its intended purpose.

Manufacturer self-declaration that the HRN-HTKDSR is in compliance with all applicable UKCA regulations, when used for its intended purpose.

Learn more about the HRN-GS16K2 harness, used to connect GO devices to light- and medium-duty vehicles internationally.

Learn more about the HRN-GR09K1, a ruggedized harness kit used to connect GO RUGGED devices to vehicles internationally.

Browse additional notes on installations and vehicles, including installation notes on specific harnesses and hardware selection for different physical environments.