Learn about accelerometers and how accelerometer data is used in telematics.

Learn how to increase the frequency of your data transmission using the Active Tracking feature.

Learn how to take advantage of the APIs available in the API Explorer Application in MyGeotab.

Leverage telematics data to detect potential collisions using the Collision Detection Add-in in My Geotab.

Learn how to use the Customer Onboarding Starter Kit to onboard new customers by automating certain tasks.

Learn more about the best practices to follow for large fleet reporting.

The purpose of this document is to provide Geotab Authorized Resellers with best practices for reporting issues to On-Call services.

Learn more about the CAN bus location and capacitive connection points for uReader devices in supported trucks and vans.

Learn more about Citizen Insights, a tool for governments to offer citizens visibility into public-facing services.

Learn how to use real-time control of vehicle cargo temperature using the Cold Chain Add-in in My Geotab.

Learn how to leverage telematics data to detect potential collisions using the new Collision Detection Rule in MyGeotab.

Continuous data connection (previously referred to as Continuous Connect) is a part of the Device behavior override feature.

Take advantage of Geotab's custom map builder, a feature that allows your organization to design business-specific maps.

Learn how to integrate custom telematics devices onto the MyGeotab platform using Geotab's Gateway APIs.

Learn how to use the Data Science Package to gain insight into your fleet using aggregated telematics data.

Learn which data attributes are available with the Ford Premium and Basic device plans.

Learn which data attributes are available with the GM Premium + Driver Feedback device plan.

Learn which data attributes and data frequencies are available with Navistar Premium.

Learn which data attributes are available with the Volvo/Mack Regulatory and Premium device plans.

Data Sharing allows users to collaborate with trusted business partners by sharing their telematics data to other Fleet Management Application databases.

Connect a GO device to your vehicle using the HRN-RW04K4 (Differential Harness).

The DIG API provides a primary endpoint to enable integrators to send bulk custom telematics device records to MyGeotab using the /records endpoint.

Learn more about the Driver Productivity Add-in, which allows drivers to add pre-configured annotations to logs.

A customizable safety report available on the Geotab Marketplace.

Enhance your EV fleet management by learning about the features available in MyGeotab.

Browse frequently asked questions about the Electric Vehicle Suitability Assessment Add-in.

Use the EV Suitability Assessment Add-in to determine if your non-electric vehicle could be replaced by an EV.

Using advanced analytics techniques, Geotab has developed a model capable of detecting collisions when they happen to present critical information on point of impact and magnitude.

Manufacturer self-declaration that IOX-KEYLESS conforms to EU Radio Equipment Directive requirements.

Manufacturer self-declaration that the TB1-LTM conforms to EU Radio Equipment Directive requirements.

Manufacturer self-declaration that the HRN-HLAEGAH is in compliance with all applicable EU Directives, and satisfies CE marking requirements, when used for its intended purpose.

Manufacturer self-declaration that the HRN-HTKDSR is in compliance with all applicable EU Directives, and satisfies CE marking requirements, when used for its intended purpose.

Learn how to install and configure the Digital Tachograph Remote Company Card Server. The DTRCO-RCS software is critical for auto-connecting company cards to the tachograph remotely.

Learn how to use the EV Charge Assurance Add-in to help ensure your EVs are charged and diagnose charging problems.

Learn how to use the Electric Vehicle Charging Cost Add-in to report on the cost of electric energy.

Learn more about EV OEM integrations, including key milestones in the OEM journey and the sequence of steps needed to achieve integration.

This document provides a list of release notes for each software release, including bug fixes and functionality improvements.

Connect a GO device to your vehicle using the HRN RZ04S4 (Ford EDI TUG Harness).

Use this visual aid to help you install the HRN-CL24T2 harness in your vehicle.

Learn how to set up an account and add vehicles using the Ford Telematics Modem.

Learn more about the Fuel Transaction Import Add-In, which allows users to import Fill-up transactions extracted by the fuel provider’s application/service into MyGeotab.

Learn how to use various fuel-saving features in MyGeotab.

Learn how to complete advanced installations of the GO device.

The Geotab Camera Add-In for the Surfsight camera allows users to view live video feeds and video recordings, create rules and exceptions to detect distracted driving behavior and harsh driving conditions, and much more.

Geotab leverages our expertise preparing data for reporting and visualization, and makes curated data tables available in the most popular Business Intelligence tools via an easy to use connection.

This document provides a detailed definition for the columns available in each of the data assets when utilizing the Geotab Data Connector tool provided to you within the Data Schema and Dictionary resources.

Geotab’s Data Connector Maintenance Insights leverages rich data to provide clear and compelling insights on common Maintenance Issues such as Electrical System Ratings and Water in Fuel for fleet managers.

The Geotab Data Connector tool was designed for Fleet Managers to import curated data from numerous Geotab data sources, sourced from their own fleet, into their preferred BI/visualization tool. The tool allows Fleet Managers to access aggregated data into a BI tool without having to manually leverage MyGeotab reports.

Geotab’s Data Connector Predictive Safety Analytics and Safety Benchmarking is an innovative approach that leverages driver behavior data and machine learning to anticipate and prevent safety incidents.

Templates provided for the Geotab Data Connector can be downloaded either from the User Guide, or directly from the Data Connector add-in page.

The Geotab Data Connector tool was designed for Fleet Managers to import curated data from numerous Geotab data sources, sourced from their own fleet, into their preferred BI/visualization tool.

Learn more about the Geotab Data-Only Plan API, which provides a wrapper around the MyGeotab .NET API.

The Cloud ELD interconnects the Geotab GO telematics device and the MyGeotab fleet management software with a mobile device running the Geotab Drive app.

Browse resources and information about telematics devices, engine data, and more.

Learn more how to install the Geotab Garmin Bundle and review key technical specifications for the bundle.

Browse frequently asked questions about the Geotab Garmin Bundle, including features, billing, device admin, and more.

Learn more about the features and technical specifications of the GO Anywhere, Geotab's first generation asset tracker that allows you to maintain visibility over the Telematics Fleet Management Application.

Learn how to install a GO device in European heavy-duty vehicles using HRN-ES12S1.

Connect a GO RUGGED device to your vehicle using HRN-RW03K4.

Learn how to install HRN-RW08K1 on a generic engine control module with no available connector.

Learn how to install a GO device on a Mercedes Sprinter using HRN-UP21Y2.

Learn how to use the Geotab Integrated Solution for International Trucks available in MyGeotab.

This document provides information about the Geotab IOX-WRKS installation process with an optional add-on LED tool.

The Geotab Keyless System allows for the simultaneous storage of up to four distinct stored Virtual Keys (reservations) locally on the GO device that can be accessed via Geotab Keyless NFC tags (tapCards).

Learn more about the Geotab Keyless Starter Inhibit feature, including how to install it using the HRN-CX10S4 harness.

This document contains all the essential information that you, the Partner, need to use the Geotab Marketplace Order Now program to facilitate purchases of Geotab and third-party products.

The Geotab Marketplace Order Now Program facilitates the purchases of hardware, software, and GO9 devices.

Partners can use the Demo Preview database to explore business opportunities with prospective Customers.

At Geotab, we work hard to build safe and reliable tools that make sense for your business, and your feedback is an essential part of that process. Geotab’s MyPreview federation is available for our Customers and Partners to access pre-production releases of MyGeotab and Geotab Drive.

This document answers common questions regarding the Surfsight camera kit available through the Geotab Order Now Program.

Browse frequently asked questions about the return process at Geotab.

Learn how to install the Roadside Add-in in MyGeotab, a solution for requesting help for a fleet vehicle.

Review installation instructions for GO devices and IOXs, and access more resources in the documentation library.

With the dash cam, you can harness the power of video to connect your fleet vehicles, help protect your drivers on the road, and save lives.

Learn how to obtain OBD-II or J1939 fault codes from MyGeotab FaultData objects.

Browse frequently asked questions about the installation process for GO9 and GO9 Rugged devices.

Connect a GO device to Rail Service vehicles (including Hi-Rail).

This document provides information on how to successfully troubleshoot a faulty GO Device.

Learn how to de-pin and re-pin a GO RUGGED device.

Learn how to safely install your telematics device.

Learn about the features and technical specifications of the GO7 RUGGED, a ruggedized telematics device.

Learn more about the features and technical specifications of the Geotab GO7 device.

Use this visual aid to help you install a GO8 device in your vehicle.

Learn about the features and technical specifications of the GO8 RUGGED, a ruggedized telematics device.

Learn more about the features and technical specifications of the Geotab GO8 device.

Follow this installation guide to install and verify a GO9 device in your vehicle.

Use this visual aid to help you install a GO9 device in your vehicle.

Learn how to install a GO9 in the Mitsubishi Fuso 2010-2021 using the HRN-GS16K2 and HRN-BU16Y5 harnesses.

Learn how to install the GO RUGGED device in your vehicle.

Learn about the features and technical specifications of the GO9 RUGGED, a ruggedized telematics device.

Learn more about the features and technical specifications of the Geotab GO9 device.

Follow this installation guide to install and verify a GO9+ device in your vehicle.

Browse frequently asked questions about the GO9+ device installation process.

Use this visual aid to help you install a GO9+ device in your vehicle.

Learn more about the technical specifications and features of the GO9+ device, an expandable device with Wi-Fi hotspot.

Follow this installation guide to install and verify a GO9B device in your vehicle.

Follow this installation guide to install and verify a GO9B device in your vehicle.

GPS involves calculating four unknown values: latitude, longitude, altitude, and time. The signals from the satellites must be received with sufficient quality to calculate the position.

Learn more about the Green Fleet Dashboard, a Marketplace Add-in that helps improve fuel economy and reduce emissions.

Learn more about using harnesses to connect a GO device to your vehicle.

Browse harness types and review harnesses for specific use cases.

Learn how to publish Rule ExceptionEvents on Google's Pub/Sub service.

Connect a GO device to your vehicle using HRN-BD16S1.

Use this visual aid to help you install HRN-CE04A4 in your vehicle.

Connect a GO device to your Mack truck using HRN-CK10K2 and HRN-CM24Y1 harnesses.

Connect a GO device to your 2019+ Mack truck using HRN-CE10K2 and HRN-CM24Y1 harnesses.

Connect a GO device to your 2019+ Mack (MR Series) Cab Over vehicle using HRN-ES12S1.

Connect a GO device to your Hino truck using HRN-CM24Y1 and HRN-CH06A2 harnesses.

Connect a GO device to your 2019+ Hino truck using HRN-CM24Y1 and HRN-CH10A2 harnesses.

Connect a GO device to your Isuzu vehicle using the HRN-CM24Y1 and HRN-CI04A2 harnesses.

Connect a GO9 device to your Mercedes Sprinter 2500 using HRN-CM24Y1 HRN-CP04A2 harnesses.

Connect a GO device to your vehicle using the HRN-CS14S21 harness.

Connect a GO device to your vehicle using HRN-CS14T2.

Learn more about connecting a GO device to vehicles without a diagnostic port using the HRN-CW03K3 harness.

Use this visual aid to help you install HRN-CW08K4 in your vehicle.

This document outlines how the Ethernet networks in vehicles allow certain vehicle systems to transmit larger amounts of data at faster speeds compared to CAN networks.

Learn how to connect an IOX using the HRN-IOXEXT IOX extension cable.

Connect a GO RUGGED device to your Komatsu vehicle using the HRN-RC12T2 harness.

Connect a GO RUGGED device to your vehicle using the HRN-RW07T1 harness.

Connect a GO device to your vehicle using the HRN-RZ04T4 (Kubota TUG Harness).

Connect HRN-TNULL to compatible cameras.

Connect a GO Device to your 2019 and later Volvo vehicle using HRN-CE10K2 and HRN-CM24Y1 harnesses.

Partners can order installation services from Geotab. When these services are ordered, Geotab will work with the Partner, Customer, and Geotab Authorized Installer to ensure installations are performed efficiently and in accordance with Geotab's standards.

Use Geotab's email and online tools to help successfully complete installations on the first try.

Learn more about Intelligent Zoning, a tool that uses vehicle stop history to automatically create new zones in MyGeotab.

Learn more about IOX-ANALOG, which enables the GO device to read analog signals from a vehicle and its connected accessories.

Learn more about IOX-BATTERY, a battery backup solution for GO9 devices and GO9 RUGGED devices (with adapter).

Learn more about IOX-CAN, which integrates third-party data with MyGeotab software, allowing supplementary fleet data collection.

Learn more about GO TALK, which provides real-time feedback to drivers about their performance to improve driving.

The IOX-KEYBOX allows remote access to a vehicle without requiring an embedded key or digital OEM support. The device supports multiple markets including corporate car sharing, consumer car sharing, and traditional car rental services.

Learn more about IOX-KEYLESS, which supports remote access to a vehicle and supports multiple markets.

Learn how the IOX-UREADER supports tachograph, contactless CAN clamp, and cold chain transportation data logging functionality.

Learn how to install the IOX-UREADER, including how to install CAN bus clamps and Cold Chain IP boxes.

Learn more about IOX-WRKS, a Public Works solution focusing on vehicles in the winter operations.

Learn how to install a GO device in your winter operations vehicle using the IOX-WRKS solution.

Learn the best practices for the placement and installation of sensors used in the IOX-WRKS solution.

Use this visual aid to help you install the IOX-WRKS solution in your vehicle.

Learn more about the full suite of IOX-KEYLESS documentation, including installation of GO9 devices with a T-harness, NFC readers, and Start Inhibit.

The Keyless Lite Solution by Geotab enables your fleet to easily share vehicles – locate, unlock and lock – from a simple mobile phone application using virtual keys.

Keyless Monitor is a MyGeotab Add-In enabling Integrators, Partners, and Customers to configure, control, and monitor Geotab Keyless hardware.

Learn more about the limitations of use for GO devices.

A list of the vehicles requiring the ALDL Shunt, categorized according to year, make, and model.

This feature provides a seamless experience for completing maintenance tasks and ensuring that your vehicles and assets are always in top condition.

Learn more about using MyAdmin for orders, shipments, account and device administration, and RMAs.

Learn more about the Alpha Testing Server, which allows select users to access pre-production releases of MyGeotab.

Learn more about the MyGeotab API Adapter, which allows streaming of data from MyGeotab into external systems.

Learn more about how MyGeotab supports Single Sign-On (SSO) user authentication via the SAML 2.0 specification.

Learn how to pull and utilize Geotab vehicle data collected from Electric Vehicles (EVs).

Learn how to use the MyInstall tool, including how to create MyInstall logins and perform device installation checks.

Browse frequently asked questions about the On-Board Diagnostic port and telematics devices.

This document answers common questions regarding the Geotab and Mercedes-Benz Connectivity Services (MBCS) Integrated Solution available in MyGeotab.

The Geotab Integrated Solution for Autocar facilitates communication between third-party telematics devices and the MyGeotab database, allowing customers to view vehicle data from third-party devices in MyGeotab.

This document answers common questions regarding the Geotab Integrated Solution for Caterpillar. Our intention is to support you, the Geotab Partner, by providing all the essential information related to this solution.

Learn how to use the Geotab Integrated Solution for Ford Vehicles available in MyGeotab.

Learn how to use the Geotab Integrated Solution for GM available in MyGeotab.

This document answers common questions regarding the Geotab Integrated Solution for Hino. Our goal is to support you, the Partner, by providing the essential information related to this solution.

This document answers common questions regarding the Geotab Integrated Solution for Renault. Our goal is to support you, the Partner, by providing the essential information related to this solution.

This document answers common questions regarding the Geotab Integrated Solution for Vermeer. Our intention is to support you, the Geotab Partner, by providing all the essential information related to this solution.

The Geotab Truck Solution includes a Remote Download System for Tachographs in the European market, seamlessly integrated with the Geotab Telematics solution.

Learn more about Personal Mode, which allows drivers and fleet managers to temporarily hide vehicle tracking in MyGeotab.

A comprehensive guide to the Telematics Fleet Management Application and the available tools for managing the data sent by the GO device.

Learn how to interface with various spreader controllers commonly installed by Public Works agencies.

This reference guide outlines the features within the Fleet Management Application that can benefit Public Works fleets and, subsequently, any fleet.

Learn how to set up a database and install and provision the IOX-WRKS for a Public Works Customer.

Connect a GO device to your vehicle using the HRN-RW03K5 (Pulse Harness).

This user guide describes the Purge feature in the Fleet Management Application, intended to be used by Database Admins, outlining how to use the feature, categories for purge, retention time periods, and FAQs.

This document outlines how to configure the remote debugging environment for the Raspberry Pi 4 board for deployment.

Learn more about the features available with the Base, Regulatory, Pro, and ProPlus Rate Plans.

Learn which GO Device features are available with the Ford Basic and Ford Premium rate plans.

Learn more about the GO device features available with GM Premium and GM Premium + Driver Feedback Rate Plans.

Learn which GO device features are available with the Navistar Premium Rate Plan.

Learn more about Route Completion configuration using a shapefile import.

This user guide provides the necessary information needed in order to use the Routes feature in the Fleet Management Application.

Learn how to install the Rugged device, designed to withstand exposure to weather elements and environmental particulates.

This guide can be used by any user to add and edit custom rules in the Fleet Management Application.

Review the technical specs for SPR-RELAYKIT, which incorporates controls for enabling a relay directly from the GO device.

The HRN-GS16K22 harness kit is designed and intended for use only with the GO device or Geotab-authorized accessory devices.

The HRN-GS16K22 harness kit is designed and intended for use only with the GO device or Geotab-authorized accessory devices.

With the dash cam, you can harness the power of video to connect your fleet vehicles, help protect your drivers on the road, and save lives.

Learn how the Tachograph Add-in helps you control and analyze the info generated by vehicles and drivers in your fleet.

Learn how to install a GO9 device in the Tesla Model Y using the HRN-CT26T1 harness.

Manufacturer self-declaration that IOX-KEYLESS conforms to UKCA regulations.

Manufacturer self-declaration that IOX-NFCREADERA conforms to UKCA regulations.

Manufacturer self-declaration that the HRN-HLAEGAH is in compliance with all applicable UKCA regulations, when used for its intended purpose.

Manufacturer self-declaration that the HRN-HTKDSR is in compliance with all applicable UKCA regulations, when used for its intended purpose.

Keyless Monitor is a MyGeotab Add-In enabling Integrators, Partners, and Customers to configure, control, and monitor Geotab Keyless hardware.

Learn more about the HRN-GS16K2 harness, used to connect GO devices to light- and medium-duty vehicles internationally.

Use this visual aid to help you install the HRN-GS16K2 universal harness kit in your vehicle.

Use this visual aid to help you install the HRN-GS09K2 harness in your vehicle.

Connect a GO device to your heavy-duty vehicle using a HRN-GS09K2 harness.

Learn more about the HRN-GR09K1, a ruggedized harness kit used to connect GO RUGGED devices to vehicles internationally.

Use this visual aid to help you install the HRN-GR09K1 harness in your vehicle.

Learn how to validate the configuration of uReaderGPS and IOX-UREADER devices using the uReader Device Installation Wizard.

Browse additional notes on installations and vehicles, including installation notes on specific harnesses, hardware selection for different physical environments.