User Guide

0 mins to read

Geotab Integrated Solution for International Trucks

Introduction

This document answers common questions regarding the Geotab Integrated Solution for International Trucks available in MyGeotab.

Which vehicles are eligible for this solution?

  1. Only US International Trucks brand vehicles are eligible for this solution.
  2. Make/Model: LT, RH, LoneStar
  3. Year: From the make/model list, most 2019 and newer vehicles are eligible once validated. To validate vehicles, submit a VIN list to your reseller.

How do I activate this solution?

Prerequisite — Validate VIN list

Please email the vehicle VIN list for any International Trucks brand vehicles (2019 or newer) to your Reseller. They will confirm which vehicles are supported with the embedded hardware and provide any additional instructions needed for activation.

After confirming which vehicles are supported, please follow the three steps below to activate this solution.

Step 2 — Provision Serial Numbers

Please contact your Reseller for completing this step. After this is done, the Reseller will share device serial numbers with you.

Step 3 — Add devices in MyGeotab (S.No. & VIN)

Add a Single Device

1

​Log in to your MyGeotab portal.

2

From the main menu, select Vehicles. On the Vehicles page, click Add > Add device.

document Image

3

Enter the serial number that you received from your Reseller. Enter a name for your device in the Description box, such as [Make][Model][Year] or the driver’s name and click OK. Enter the VIN of the vehicle in the “Vehicle ID number:” field and click Save.

document Image

4

After adding the device in MyGeotab, turn the vehicle ignition ON to complete the process.

Add Multiple Devices

1

Log in to your MyGeotab portal.

2

From the main menu, select Vehicles. On the Vehicles page, select Add > Quick import.document Image

3

Enter the device serial numbers, vehicle descriptions, and VIN as comma separated values in the text field provided. Format the information as <Serial number>,<Vehicle description>,<VIN>.

Note: You must provide the VIN to add International Trucks Telematics devices in MyGeotab.

document Image

4

After adding the devices in MyGeotab, turn the vehicle ignition ON to complete the process.

! IMPORTANT: Be sure that you add the device to one (1) database only, and that you provide only those VINs which you are authorized to view.


NOTE: It may take up to 24 hours for the vehicle data to become available on MyGeotab after the devices are added to the database.


Using the Solution

1

After you have added the device in MyGeotab, navigate to Map and click the Trips history button.

2

Under Trips History, click a trip to view it on the Map. The image below shows an example of a Trip History in MyGeotab. The same User Interface (UI) is used with this solution.

document Image

3

To view telematics data and exceptions, you can view inbuilt reports, rules and exceptions from MyGeotab. For more details refer MyGeotab product guide.

4

For more information on subscription plans, please check the Rate Plan Features and Data Set documents.


Resources and Contact Information

For more information, please refer to the Geotab-International Trucks brochure, and the MyGeotab User Guide. For questions, please contact your Reseller.

scroll-up