Skip to main content

The Road Ahead: GO Focus Pro, Ace, Trips, Work Orders, Utilization & Compliance Enhancements

EishiFUN
Geotabber
Original Poster

Hi Geotab Community!

We recently wrapped up our May 2026 edition of the Geotab Community product update webinar series The Road Ahead. Be sure to:

🎥 Visit the Geotab Community Events Page to watch the recording

💬 Read through all of the answers to the questions we were not able to cover live listed below

🙋 Ask any additional questions you might have by commenting on this discussion

💬 Q&A Recap

📷 GO Focus Pro

  • Q: Can other types of Dash Cameras be connected to Geotab or strictly Geotab cameras?
    • A: Currently, only Geotab-provided AUX Cams (as well as SD Cards, as a side note) will work together.
  • Q: Is there a way to dismiss the events if that is not something that is relevant to our company's policies?
    • A: Yes, each event can be manually dismissed. Additionally, the AI will start to learn over time as well.
  • Q: What do you do if you have a driver that has smaller eyes that causes them to get a lot of extra events when they are not really doing anything wrong?
    • A: We look at several different factors in determining the various events—the yaw of one's neck for eyes down/distraction events, or reaction time in the instance of drowsiness, to name a few. In addition, when a driver's Smart Driver ID Facial Template is created, we use it as a baseline.
  • Q: Is the secondary interior cabin capable of angling down to capture a lap belt using AI?
    • A: Absolutely, but typically the standard in-cabin/driver facing lens already has the field of view to capture seat belt events with the highest precision.
  • Q: I currently have a driver who uses his sun visors to block cameras. Will these new cameras possibly detect this?
    • A: While we cannot stop a driver from trying to manipulate or block the camera's lens, we do offer an alert when either the camera, cable, or lens is tampered with.
  • Q: Can we set up the leaderboard for a different period than 1 week, or how do we look back through the weeks?
    • A: The ability to switch time frames will be released soon for leaderboards and trend analysis.
  • Q: Are GO Focus Pro universal mounts for mirror diameters of 6" plus going to be available? (Larger than the planned tube mounts.)
    • A: Answer coming soon!
  • Q: Like harness protocols, will the Pro mounts have a list of recommended vehicle model types for mount size?
    • A: Answer coming soon!
  • Q: Will side AUX cams also do license plate recognition?
    • A: Answer coming soon!
  • Q: Will the trailer link rear camera have the battery option to do security mode on a trailer, when released?
    • A: Answer coming soon!
  • Q: Can we reset parameters on tailgating?
    • A: Answer coming soon!
  • Q: Will the driver ID on the camera be able to restrict drivers starting the vehicle ignition in cooperation with the IOX-Relay (in the same way as the IOX-NFC Reader)?
    • A: Answer coming soon!

🛠️ Maintenance, Compliance & Productivity

  • Q: What is the accuracy of the faults and at what % of risk should I be alerting my drivers?
    • A: We've seen 95%+ accuracy on the faults data, so we feel confident you can depend on it! We would recommend that if you have critical or high severity you alert your drivers.
  • Q: Will we be able to exclude non-DOT related inspections from the DOT inspections in the database/reporting?
    • A: Yes, that functionality will be available.
  • Q: Will drivers be able to upload pictures during pre-trip (i.e., without defects) to show the vehicle has no body damage?
    • A: Yes, that functionality will be available.
  • Q: Will we be able to enter in work done by VMRS code as well as part name? (Ex. Drive Tire Recap VMRS: 017-001-012)
    • A: Answer coming soon!

 

Join the conversation

You need to be logged in to reply to this post and participate in the Geotab Community discussions.

No replies yet

Be the first to reply to this post.

Still have questions?