User Guide
0 mins to read
Geotab Integrated Solution for International Trucks — User Guide
User Guide
0 mins to read
Learn how to use the Geotab Integrated Solution for International Trucks available in MyGeotab, including how to activate the solution, how to access the solution in MyGeotab, and which cellular networks are available for this solution.
Geotab Integrated Solution for International Trucks
Introduction
This document answers common questions regarding the Geotab Integrated Solution for International Trucks available in MyGeotab.
Which vehicles are eligible for this solution?
- Only US International Trucks brand vehicles are eligible for this solution.
- Make/Model: LT, RH, LoneStar
- Year: From the make/model list, most 2019 and newer vehicles are eligible once validated. To validate vehicles, submit a VIN list to your reseller.
How do I activate this solution?
Prerequisite — Validate VIN list
Please email the vehicle VIN list for any International Trucks brand vehicles (2019 or newer) to your Reseller. They will confirm which vehicles are supported with the embedded hardware and provide any additional instructions needed for activation.
After confirming which vehicles are supported, please follow the three steps below to activate this solution.
Step 2 — Provision Serial Numbers
Please contact your Reseller for completing this step. After this is done, the Reseller will share device serial numbers with you.
Step 3 — Add devices in MyGeotab (S.No. & VIN)
Add a Single Device
1 | Log in to your MyGeotab portal. |
2 | From the main menu, select Vehicles. On the Vehicles page, click Add > Add device.  |
3 | Enter the serial number that you received from your Reseller. Enter a name for your device in the Description box, such as [Make][Model][Year] or the driver’s name and click OK. Enter the VIN of the vehicle in the “Vehicle ID number:” field and click Save.  |
4 | After adding the device in MyGeotab, turn the vehicle ignition ON to complete the process. |
Add Multiple Devices
1 | Log in to your MyGeotab portal. |
2 | From the main menu, select Vehicles. On the Vehicles page, select Add > Quick import.  |
3 |
Note: You must provide the VIN to add International Trucks Telematics devices in MyGeotab.  |
4 | After adding the devices in MyGeotab, turn the vehicle ignition ON to complete the process. |
! IMPORTANT: Be sure that you add the device to one (1) database only, and that you provide only those VINs which you are authorized to view.
✱ NOTE: It may take up to 24 hours for the vehicle data to become available on MyGeotab after the devices are added to the database.
Using the Solution
1 | After you have added the device in MyGeotab, navigate to Map and click the Trips history button. |
2 | Under Trips History, click a trip to view it on the Map. The image below shows an example of a Trip History in MyGeotab. The same User Interface (UI) is used with this solution. |
 | |
3 | To view telematics data and exceptions, you can view inbuilt reports, rules and exceptions from MyGeotab. For more details refer MyGeotab product guide. |
4 | For more information on subscription plans, please check the Rate Plan Features and Data Set documents. |
Resources and Contact Information
For more information, please refer to the Geotab-International Trucks brochure, and the MyGeotab User Guide. For questions, please contact your Reseller.
