Installation overview
An overview for fleet managers who need to work with installers to verify device work, from new installation to service.
Installation verification (MyInstall) is how you confirm that a device was installed, removed, swapped with another device, or serviced. With Verified, devices are automatically added to MyGeotab during the physical installation, upon installation verification.
Why verify your installations?
Verifying your installations through MyInstall ensures they are done right the first time and that the device is working before you leave the site.
- Higher quality, faster: Check your installations on-site to find and fix issues fast. This ensures every device works right from the start.
- Accurate asset data: Installers can save photos and notes about the asset. This data appears in MyGeotab as soon as the installation is approved.
- Works with any device: Check installations for any Geotab device. It works with GO device, GO Anywhere, IOX devices, and third-party devices.
Feature comparison
| Feature | MyInstall (Secure) | MyInstall (Public) | Geotab Video App |
|---|---|---|---|
| Verify GO device connection | ✔ | ✔ | ✘ |
| IOX detection and configuration | ✔ | ✘ | ✘ |
| Integrated auxiliaries configuration | ✔ | ✘ | ✘ |
| Video configuration for GO Focus Plus and GO Focus Pro | ✘ | ✘ | ✔ |
| Update asset information | ✔ | ✔ | ✘ |
| Device removals | ✔ | ✘ | ✘ |
| Device swaps (switching an old device for a new device in the same asset) | ✔ | ✘ | ✘ |
| Device service (capturing the service of a device within an asset) | ✔ | ✘ | ✘ |
| Capturing photos of the installation for Customer review | ✔ | ✘ | ✔ |
Choosing an installation path
Before a third-party installation, decide whether to use an installation code. With an installation code (Verified), give the code to the installer, who selects I have an install code. Without a code, add the device to the correct MyGeotab database before installation; the installer selects I do not have a code and continues with the existing process.
Installer types
Choose the installation option that matches who will complete and verify the work.
Compare the options below to find out where to start.
| Installer type | Description | Where to start |
|---|---|---|
| Self-installation | For Customers who want to complete and verify the work without hiring an installer. | Scan the QR code on the box to get started. |
| Geotab Trusted Installer | For Customers who hire a Geotab Trusted Installer. Geotab hires an installer on your behalf to complete the work. | These installers will receive a work order from Geotab and complete the process on your behalf. New installations will appear automatically in MyGeotab. |
| Third-party installer | For Customers who hire an installer directly, rather than through Geotab. | For Verified, generate an installation code in MyGeotab and share it with the installer. For the existing process without a code, add the device to the correct MyGeotab database before installation; the installer selects I do not have a code. |
Self-installation
For Customers who want to complete and verify a new installation, removal, swap, or service themselves through the installation flow in MyGeotab.
You can access the installation flow in one of two ways:
- Scan the QR code on the box to open MyInstall, then log into your MyGeotab account.
- Log into your MyGeotab account and select from the side navigation.
Once you access the installation flow, select the type of work to begin:
Geotab Installer
Geotab Trusted Installers who verify device work using Geotab work orders.
Geotab installers have been screened or selected by Geotab to complete device work. They must have a work order from Geotab before they can start.
Next steps
No action is needed while the installer completes the work. After a new installation is complete, updates will automatically appear in MyGeotab. On the Assets page, select the banner to open the Review Pending Installations page and view the asset changes. For installer work-order instructions, see Work orders.
For more information, see Review pending installations.
Third-party installer
For fleet managers who hire installers directly and arrange installation verification with or without an installation code.
For Verified installations, generate an installation code in MyGeotab and share it with the installer. See Generating an install code. The installer selects I have an install code and enters the code in MyInstall. If you are not using an installation code, add the device to the correct MyGeotab database before installation. The installer selects I do not have a code to continue with the existing process.
If the installer does not have a Geotab account to access the secure version of MyInstall, they must complete a new installation through the public version of MyInstall. The installer completes MyInstall to record the installation and asset details. When pending asset changes are available after installation, a banner appears on the Assets page. Select the banner to open the Review Pending Installations page to view the asset changes.