Hi! We are trying to replace the IOX-NFC readers with the FOB feature in the GO Focus Plus. We cannot get the Unidentified Driver rule to beep when the IOX is removed. Has anyone had luck setting up rules to beep at the driver if they do not FOB in via the GO Focus Plus camera?
You need to be logged in to reply to this post and participate in the Geotab Community discussions.
The GO Focus Plus camera has a built-in NFC reader that can replace the IOX-NFC reader. To make the Unidentified Driver rule beep using the FOB through the camera, follow these steps:
1. Enable the reader in MyGeotab: Go to the camera settings tab and make sure the NFC reading feature is active.
2. Set up the Rule: In Rules & Groups > Rules, look for the 'Unidentified Driver' rule.
3. Add Notification: In the Notifications tab, select Add Beep Response and make sure the GO device is set to issue the sound alert when the rule condition is met.
Keep in mind that Smart Driver ID (facial recognition) can also automate this assignment without needing physical FOBs.