Hey, @SMort-1947​!

Pretty sure your best bet here would be to install GO-RUGGED devices onto your forklift. This won't give you the rich engine diagnostics of a regular GO unit installed into a vehicle, but you can still get it on a Pro plan or higher to get the accelerometer data, if that's useful to you.

Here are some resources on the GO-RUGGED:

Installation Video (YouTube)

Installation Doc (Geotab's website)

I would also recommend reaching out to your reseller to ask about your particular type of forklift and any possible integrations that Geotab may have with the manufacturer. I am not entirely certain, but if your forklift is newer and the manufacturer has telematics embedded (two big "ifs"), you may be able to use the onboard telematics within your Geotab system without the need for new hardware.

If you're unsure who your reseller is, you should be able to find their info under Support > Contact Information within your MyGeotab database.

Hope this helps get you pointed in the right direction. :)

Best,

Joy B

(440) 880-0411

joy@telematics411.com

No, my client already has his Go9. What I need to do is install the Go9 in his forklift, and I need the installation guide for this.

Hey @SMort-1947​  What kind of forklift are you trying to install the device in? We may have a different harness that we would recommend using depending on the kind you have.

I look forward to hearing from you.

Have a good one!

Eishi FUN