<a data-id="1351" data-value="Cristian.hdz.Prime24" data-denotation-char="@" href="/user/cristian.hdz.prime24" class="text-decoration-none mention">@Cristian.hdz.Prime24</a> Thanks for the response. I did find what you had posted helpful. Are you able to tell me or have any first hand experience with the data that can be pulled. Are we able to see blade up&#x2F;down positions, speeds, and other real time data? our main focus would be on the blade up&#x2F;down. I was wondering if we would need to install a proximity type sensor to monitor this.

Caterpillar Graders

Hey <a data-id="1351" data-value="Cristian.hdz.Prime24" data-denotation-char="@" href="/user/cristian.hdz.prime24" class="text-decoration-none mention">@Cristian.hdz.Prime24</a> , Thank you for asking your question in our community. So this hasn't come up often so I couldn't find much about it. From my understanding and what I have seen with other IOX's this is likely either an unexpected state so the 3 value is returned for a reset state. We would want to look a little more into the data to see exactly what it was but it is something along those lines far as I could find. Let us know if you have any other 	questions. Always happy to help! Have a good one! Eishi FUN

iox nfc

<a data-id="1044" data-value="EishiFUN" data-denotation-char="@" href="/user/eishifun" class="text-decoration-none mention">@EishiFUN</a> Thank you very much, I will be escalating it

update the firmware on an iox GO talk

<a data-id="1351" data-value="Cristian.hdz.Prime24" data-denotation-char="@" href="/user/cristian.hdz.prime24" class="text-decoration-none mention">@Cristian.hdz.Prime24</a> I dont know of a way but maybe <a data-id="8241" data-value="Tony_M" data-denotation-char="@" href="/user/tony_m" class="text-decoration-none mention">@Tony_M</a> does

How is the date that an iox was installed determined?

Hello, Based on my technical experience, this very common error appears when the physical connection of the IOX is not adequate.

ERROR CODE IOX

Newer IOX-BT (GXSBT1) does not pick up IOX-BT beacon packets that older versions of IOX-BT pick up. With older versions of IOX-BT we are seeing the custom data. With GXSBT1 we are not seeing any custom data.  We are following the Add-On Protocol - BLE Advertisement https://developers.geotab.com/hardware/protocolReference/ble/index.html

New IOX-BT (GXSBT1) does not pick up IOX-BT beacon packets.

Has anyone else experienced this issue with their IOX-NFC readers where the reader is going online and offline hundreds of times per day. This looks like a recent issue and it causes the driver reminders to constantly go off and the NFC fobs do not work. Below is the NFC device connected measurement over the last 2 days. 

Geotab NFC going offline and online hundreds of times

I am currently trying to configure my spreader integration. After installing my IOX-works cable, I have set my spreader controller type within the public works menu . I am, however having an issue figuring out how to display treatment progress on the map in the same way that I would track exceptions when using the IOX-AUX cable. While I can verify measurements within the public Works menu, I do not see any options to track the status of whether or not the spreader is on or off.

How to display treatment progress with IOX-WRKS spreader integration

I have blank NFC cards I would like to use for geotab along with employee ID cards. I'm not sure how to write the driver ID to the card. Does anyone have any examples. I have the NFC reader installed and the following added under the vehicles for custom parameters  &lt;Parameter Description='NFC use Generic Card Serial Number' Offset='179' Bytes='01' IsEnabled='true'/&gt;

Write Generic NFC Cards

Hey Guys, Just wondering if there has been any additional information put out about the IOX-BATT that we heard about at Connect last January.  Does Geotab have any papers on it yet? Thanks in advance for your help!  :) Best,Joy @FleetNavSystems-1081

Info on IOX-BATT?

Hello, Can you clarify which are the steps to start using custom NFC Tags on my devices?Can you confirm the following tag will work on Driver Logs and Whitelist: https://store.gototags.com/nfc-key-fob-ntag213-blue Thanks 