Cameras tab
The Cameras tab on the Video Events page provides an overhead view of all the cameras in your fleet.
The Cameras tab shows the most recent thumbnail for each camera in your fleet. Labels on each thumbnail show if the camera is parked, offline, or in deep sleep.
You can click on any thumbnail to view the camera's recent events, trips, and device information.
Use the Assets dropdown to filter the page by your assets. This helps you find cameras associated with a particular vehicle.
Use the Status dropdown to filter the page by camera status (Online, parked, offline). This allows you to quickly see which cameras in your fleet are currently in use or asleep.
Use the Products dropdown to filter the page by camera make. If you have multiple camera models, filter the page to view cameras from a specific manufacturer.
Changing camera modes
Learn how to change camera modes in MyGeotab if you need to adjust your camera's installation.
- Open the Video Events page:
- Click the Cameras tab.
- Select the camera you need to adjust from the list.
- Set the Mode dropdown to Adjustment.
- Set the length of time you need to adjust the camera.
- Click Save.
Waking up a camera
Learn how to wake up a camera in MyGeotab.
- Open the Video Events page:
- Select the Cameras tab.
- Select the camera you want to wake up from the list.
- Click Wake up at the top of the page.
Two-way audio
Two-way audio lets you place a voice call from MyGeotab to a driver through the camera in their vehicle.
With two-way audio, you can reach a driver while they're driving, without calling a personal phone. The driver hears the call through the speaker in the camera and talks back through its built-in microphone.
How a call works
You place the call from the Cameras tab on the Video Events page.
The camera rings in the vehicle and announces, "Incoming call, press the event button to accept."
The driver presses the event button on the camera to accept. The call connects, and you and the driver talk through the camera.
Either of you can end the call at any time.
Driver control and privacy
The camera transmits nothing from the vehicle until the driver accepts the call. If the driver doesn't accept, the call doesn't connect.
Only users in MyGeotab can start a call. The camera gives the driver no way to place one.
A call can last up to five minutes.
Geotab doesn't record calls.
Call permissions
To place calls, you need the Two-way audio security clearance and access to the group that the camera belongs to. Only Administrators have the clearance by default. An Administrator can grant it to other users. Drivers can't place calls. For more information about clearances, refer to Video security clearances.
Placing a call to a driver
Call a driver from MyGeotab through the GO Focus Plus or GO Focus Pro camera in their vehicle.
Before you begin: To place a call, ensure the following:
You have the Two-way audio security clearance and access to the camera's group.
You have a GO Focus Plus or GO Focus Pro camera in the driver's vehicle.
Use two-way audio to speak with a driver while they're driving. The camera transmits no audio from the vehicle until the driver accepts the call.
The call ends.