GO Focus overview

The GO Focus is an AI-powered, privacy-focused forward-facing dash cam designed to augment the data provided by the GO9 device and provide contextual information about what is happening outside of the driver’s seat.

The GO Focus device connects to the GO device as an IOX to provide additional contextual data from outside the vehicle. With its on-board LTE connection, the GO Focus uploads video during critical events to assist in driver exoneration.

Note: The GO Focus is only compatible with GO9 or newer devices (GO9, GO9B, GO109 Plus).

Safety sensor

The GO Focus actively monitors following distance. Connecting to the GO device as an IOX, it provides additional information into Geotab’s safety solutions. With its on-board LTE connection, it can upload video during critical events to assist in driver exoneration.

Features

Continuous measurement of following distance
Lane departure warning
LTE connectivity for video upload
IOX connectivity for enhancing GO device safety data

Note: Lane departure warning is coming later in 2026.

Warning: RF Exposure Compliance

RF exposure compliance information for the GO Focus device in accordance with FCC and ISED RSS-102 requirements.

Warning: This equipment complies with FCC and ISED RSS-102 radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operated in conjunction with any other antenna or transmitter. To avoid exceeding the FCC and ISED RSS-102 radio frequency exposure limits, install and operate this equipment with a minimum distance of 20 cm (7.9 inches) between the antenna and the body during normal operation. Follow the specific operating instructions for satisfying RF exposure compliance.

Warning: Cet équipement est conforme aux limites d’exposition aux rayonnements FCC et ISED CNR-102 établies pour un environnement non contrôlé. Cet émetteur ne doit pas être installé ou utilisé en conjonction avec une autre antenne ou un autre émetteur. Afin d’éviter la possibilité de dépasser les limites d’exposition aux radiofréquences FCC et ISED, cet équipement doit être installé et utilisé avec une distance minimale de 20 cm (7.9 pouces) entre l’antenne et le corps pendant le fonctionnement normal. Les utilisateurs doivent suivre les instructions spécifiques d’utilisation pour respecter la conformité à l’exposition aux RF.

Contact your reseller for more information.

Regulatory statements

Regulatory compliance statements for the GO Focus device, including certifications for Canada, the United States, the European Union, the United Kingdom, and Germany.

Canada

CAN ICES-003 (B) / NMB-003 (B)

This device contains license-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s license-exempt RSS(s). Operation is subject to the following two conditions:

This device may not cause interference.
This device must accept any interference, including interference that may cause undesired operation of the device.

L’émetteur/récepteur exempt de licence contenu dans le présent appareil est conforme aux CNR d’Innovation, Sciences et Développement économique Canada applicables aux appareils radio exempts de licence. L’exploitation est autorisée aux deux conditions suivantes :

L’appareil ne doit pas produire de brouillage;
L’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en compromettre le fonctionnement.

USA

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

Changes or modifications not expressly approved by Geotab could void the user’s authority to operate the equipment.

EU / UK

Product Wireless Information:


Frequency band	Maximum EIRP
LTE B1: 1920–1980 MHz	Max 25.25 dBm
LTE B3: 1710–1785 MHz	Max 25.43 dBm
LTE B7: 2500–2570 MHz	Max 25.66 dBm
LTE B8: 880–915 MHz	Max 24.52 dBm
LTE B20: 832–862 MHz	Max 24.44 dBm
LTE B28: 703–748 MHz	Max 24.34 dBm
GSM 900: 880–915 MHz	Max 35.81 dBm
DCS 1800: 1710–1785 MHz	Max 33.26 dBm
WCDMA B1: 1920–1980 MHz	Max 26.16 dBm
WCDMA B8: 880–915 MHz	Max 25.81 dBm
Bluetooth: 2402–2480 MHz	Max 9.74 dBm
WLAN 2.4 GHz: 2412–2472 MHz	Max 19.7 dBm

Minimum support period for GXSVS1: November 2027

The device automatically checks for firmware status each time it boots. If new firmware is available, it is automatically downloaded and applied upon the next boot-down.

Germany

Wir besitzen keine Versand- und Lagerfläche in Deutschland und sind nicht von der Rücknahmepflicht nach § 17 ElektroG betroffen.