GO Anywhere Tag overview
The GO Anywhere Tag provides Bluetooth Low Energy (BLE) tracking for small and non-powered assets.
The GO Anywhere Tag is a Geotab Bluetooth Low Energy (BLE) beacon for tracking small and non-powered assets. It attaches to equipment, tools, and non-powered trailers, broadcasting its presence to nearby Bluetooth-enabled Geotab devices and through Geotab's extended partner network. Location data is relayed to the MyGeotab platform. The asset does not require its own cellular connection.
Key features
- IP67 rated
- Dust-proof and water-resistant.
- Replaceable CR2477 battery
- More than 5 years of operational life.
- BLE-based
- Uses Bluetooth Low Energy (BLE) and requires no wiring or vehicle power.
- Real-time and historical location tracking
- Track asset locations in real time on the MyGeotab map, and review historical location data in Trips History.
- Separation and zone-based alerts
- Configure alerts for tagged assets.
- Over-the-air firmware updates
- Firmware updates are delivered over the air via the nRF Connect SDK.
Getting started
Use the following resources to install and activate GO Anywhere Tag:
Security
The GO Anywhere Tag communicates using Bluetooth Low Energy (BLE) advertising within short range. Location data is transmitted to the Geotab platform through the host GO device secure connection.
BLE signal detection is limited to Bluetooth-enabled Geotab devices and the extended Geotab partner network within that range.
Location data is transmitted to the Geotab cloud through the GO device's encrypted connection and the extended partner network.
Device identity managed through serial number and MAC address pairing in MyGeotab.
Technical specifications
Hardware, Bluetooth Low Energy (BLE), battery, and environmental specifications for the GO Anywhere Tag.
| Specification | Details |
|---|---|
SKU | TT1-BTE9TAG |
Product ID | 148 |
Serial number prefix | ZE |
BLE chipset | Nordic nRF52832 |
Communication protocol | Bluetooth Low Energy (BLE) |
Max BLE range | 100 m |
Operational BLE range | 5–100 m |
Average current draw (advertising) | ~17 µA |
Peak current draw | ~6 mA @ 3 V |
Battery | CR2477 lithium manganese dioxide coin cell, 1000 mAh (user-replaceable) |
Operational life | > 5 years |
Firmware updates | Over-the-air (OTA) via nRF Connect SDK |
Dimensions | 49 × 66 × 17 mm |
Water and dust resistance | IP67 rated |
Operating temperature | -20°C to +70°C |
Enclosure color | Black |
Certifications | FCC (ID: 2ABU6-E9), IC (20896-E9), CE (RED 2014/53/EU), RoHS, REACH. Pending: WEEE, CalProp 65 |
Compatible host device | Bluetooth enabled Geotab devices (GO10, GO Anywhere Plus, GO9B +IOX-BT) and Extended Geotab Network. |