Customer has a  a vehicle showing speeding 5 mph more in the system than he is actually going. Example - he had his cruise control at 71 and in the system, he was showing 76. They believe that it's his tire size causing this issue. He has bigger tires than normally. Is the Audio Feedback is from the Engine or the GPS?

In MyGeotab Is the Audio Feedback for Speeding determined by the engine data, or GPS data?

In the past, it was indicated that, if a fobbed in driver, after a certain amount of time, has left the vehicle after a trip is completed, is then no longer assigned to that vehicle, leaving the assignment as "Unknown Driver" It had related to how much time was allotted until the reminder time trips.I tried to ask Geotab Ace this question, but it only reference manually assigning drivers.

Can I make MyGeotab change the driver to &quot;Unknown Driver&quot; for an asset after a Fobbed user has completed the trip and left the vehicle.

Can I make MyGeotab change the driver to "Unknown Driver" for an asset after a Fobbed user has completed the trip and left the vehicle.

The customer has some hearing impaired drivers and they are looking for some way for alerts from the device to be in some visual form.

Is there a Geotab device for the hearing impaired?

The customer is only using the DVIR (they are not HOS). They want the drivers to do an Asset Inspection daily at the beginning of the shift, but if a defect that was previously reported is not repaired by the next day, they have to first list all defects as repaired before they can do a new inspection, which point they enter in those same defects.

Can a driver submit a new asset inspection without resolving defects from a previous inspection on the same vehicle?

Customer is having control issues, and non-assigned key fobs may have been used in some of their vehicles.

If a Key fob is used that is not linked to a specific driver, does the system acknowledge a key fob was used? If so, does it identify the Fob serial number?

Is it possible to set up Two-Factor Authentication for specific users on the database? In this case they want certain users to use Two-Factor Authentication every time they log in.

Is it possible to set up Two-Factor Authentication for specific users on the MyGeotab database?

I need to know the best way to configure the system so that the driver of a specific vehicle is notified when it's speeding, after hours, etc.

I want to have a speeding rule notification go to the driver of the vehicle that is speeding.

page-user page-user-carmine-terracciano-1098 template-account-profile page-status-200 theme-harmony user-guest

Company

Title

<a href="/user/eishifun" data-id="1044" data-value="EishiFUN" data-denotation-char="@" class="text-decoration-none mention">@EishiFUN</a>​ &amp; <a href="/user/tony-mcgeough-1053" data-id="1053" data-value="TonyFC-1053" data-denotation-char="@" class="text-decoration-none mention">@TonyFC-1053</a>​ Thank you both for your information!C

<a href="/user/eishifun" data-id="1044" data-value="EishiFUN" data-denotation-char="@" class="text-decoration-none mention">@EishiFUN</a>​  &amp; <a href="/user/tony-mcgeough-1053" data-id="1053" data-value="TonyFC-1053" data-denotation-char="@" class="text-decoration-none mention">@TonyFC-1053</a>​ Each of you has given a different answer regarding what Geotab primarily uses to determine speeding to trigger Audio Alerts.Is there a definitive source at Geotab that can verify which is the primary source (I understand the "secondary" source is defaulted to in the event of issues with the primary source). Thanks,Carmine

Customer has a  a vehicle showing speeding 5 mph more in the system than he is actually going. Example - he had his cruise control at 71 and in the system, he was showing 76. They believe that it's his tire size causing this issue. He has bigger tires than normally. Is the Audio Feedback is from the Engine or the GPS?

In the past, it was indicated that, if a fobbed in driver, after a certain amount of time, has left the vehicle after a trip is completed, is then no longer assigned to that vehicle, leaving the assignment as "Unknown Driver" It had related to how much time was allotted until the reminder time trips.I tried to ask Geotab Ace this question, but it only reference manually assigning drivers.

The customer has some hearing impaired drivers and they are looking for some way for alerts from the device to be in some visual form.

The customer is only using the DVIR (they are not HOS). They want the drivers to do an Asset Inspection daily at the beginning of the shift, but if a defect that was previously reported is not repaired by the next day, they have to first list all defects as repaired before they can do a new inspection, which point they enter in those same defects.

<a href="/user/tony-mcgeough-1053" data-id="1053" data-value="TonyFC-1053" data-denotation-char="@" class="text-decoration-none mention">@TonyFC-1053</a>​ Thank you again. The customer is very interested in this!

<a href="/user/tony-mcgeough-1053" data-id="1053" data-value="TonyFC-1053" data-denotation-char="@" class="text-decoration-none mention">@TonyFC-1053</a>​  That worked great. And when I ran it for my customer, it showed more than one instance of a non-assigned fob being used on a vehicle!  Thank you! Carmine

Customer is having control issues, and non-assigned key fobs may have been used in some of their vehicles.

Is it possible to set up Two-Factor Authentication for specific users on the database? In this case they want certain users to use Two-Factor Authentication every time they log in.

Recent Activity

In MyGeotab Is the Audio Feedback for Speeding determined by the engine data, or GPS data?

Can I make MyGeotab change the driver to "Unknown Driver" for an asset after a Fobbed user has completed the trip and left the vehicle.

Is there a Geotab device for the hearing impaired?