Rate plans

End-to-end security using authentication, encryption, message integrity verification, individualized devices with unique IDs, non-static security keys, and digitally-signed firmware

Patented advanced trip recording for accurate vehicle location and distance traveled

Wi-Fi hotspot functionality (additional monthly rate applies. US&Canada only)

Internal GPS antenna

Position instantly available after cold start (ephemeris)

Simple to install

Installation record (date/time/location) when unit connected

Device tampering or removal detection with date/time/location stamp

Voltage monitoring on crank (indicates electrical battery health)

Battery voltage monitoring via regular heartbeats when ignition is off (identifies battery drain — door open/light left on)

Self-calibrating accelerometer (no vehicle setup required)

Detect towing events (moving with ignition off)

False positive filtering (does not record railroad tracks, speed bumps, or potholes as aggressive driving)

Collision data memory buffer records over 100 minutes of second-by-second data — auto detection and upload of last 1.2 minutes on collision

On-device memory for logging out-of-coverage situations — up to 1 month of driving

Automatic OBD/CAN protocol detection at device install

Automatic VIN readout

Estimated odometer and engine hours (not based on engine data)

Actual engine hours, engine road speed, and odometer from engine

Over-the-air firmware updates

Over-the-air plan upgrades

Over-the-air parameter modifications

IP indemnification

Limited Lifetime Device Warranty*

*Conditions apply. See End User Agreement

Odometer, Engine Hours and Engine Road Speed

Coolant temperature

Driver's seat belt

Passenger seat occupied

Passenger seatbelt

Total economy per vehicle

Total fuel used

Total idle fuel used

Fuel level input (to identify fuel-up events and for data integration with fuel card)

RPM

Ignition detect

Check Engine Light

Engine faults, including unknown proprietary engine faults

Data Specific to Electric Vehicles (supported BEVs, PHEVs, and FCEVs)

EV driving energy used

EV battery charge % (SOC)

EV charging status

EV charging energy

Speeding

Driver ID not presented on ignition

Idling

Driving in reverse

Rule violation

High RPM — target fuel savings

Seatbelt usage detection over user-defined speed

Aggressive driving (acceleration, braking, and cornering)

Driver feedback through IOX-GOTALK

Custom Add-In integrations

Access partner Add-Ons and solutions through the Marketplace (additional cost may apply)

Advanced Software Development Kit (SDK) supporting full integration and customization (C# & Javascript integration, full AJAX/JSON interface)

IOX-KEYLESS

IOX-BATTERY

Monitor auxiliary input events — door open/close, sensors, and more via IOX-AUXM

In-vehicle alert and notification via IOX-ALERT

In-vehicle verbal coaching via IOXs (Available in English, German, Spanish, French, and Italian)

Driver ID via IOX-NFCREADERA

Loud buzzer via IOX-BUZZ

USB power for mobile devices and tablets via IOX-USB

Two-way HOS data transfer via IOX-USB

(Learn more aboutdata transfer.)

Iridium satellite connection via IOX-SATIRDv2

Bluetooth® beacon monitoring via IOX-BT

DICKEY-john® Control Point control system via the IOX-DJ (Discontinued)

Rexroth® Compu-Spread® CS440 and CS550 controllers via the IOX-COMSPREAD (Discontinued)

Cirus Controls® SpreadSmart Rx® controllers via the IOX-CRS (Discontinued)

FORCE® AMERICA 5100ex® Spreader Control systems via the IOX-FAM (Discontinued)

Public Works solution with spreader controllers

Public Works solution

Read third-party serial data via IOX-RS232M/F/D

Read third-party data over the CAN bus via IOX-CAN

Mobileye integration via IOX-CAN

Reefer monitoring with Valor wireless temperature sensors (requires IOX-CAN)

Tire Pressure Monitoring Systems (TPMS) integration with Valor wireless sensors (requires IOX-CAN)

Lone worker and man down solutions with Grace Industries integrated devices (requires additional IOXs)

Monitor analog auxiliary inputs — fuel levels, temperature, PTO detection, and more via IOX-ANALOG

Control a remote relay in the vehicle with IOX-OUTPUTM

Tachograph

Driver ID

Remote Download (RDL) of logs, as well as vehicle and driver information

Real-time status and tachograph data (TAC)

Infraction Management (AFA)

Cold Chain

Temperature and other telemetry

2-Way communication (temperature set point, alarm clearing)

CAN Clamp (only IOX-UREADER)

Asset Inspection

US Federal Regulations (§396)

Canadian Regulations (NSC 13)

Drive App Hours of Service (HOS)

US Federal Interstate Regulations (§395)

(US property/passenger 60-hour/7-day & 70-hour/8-day, US property/passenger short-haul, 16-hour day support)

Select US Intrastate Regulations

(California property/passenger intrastate)

Canadian Federal Regulations (N and S of 60°)

(7-day cycle 1 & 14-day cycle 2)

Automatic duty status changes

Adverse weather condition support

Oil industry exemption support

Yard Move and Personal Conveyance support

Driver identification and co-driver support

Works alongside other third-party applications installed on mobile device/tablet

Two-way messaging

Dispatch zone and address

Routing

Rules-based driver feedback via messaging

Navigation using built-in mobile device/tablet application or third-party navigation

Automatic driver-to-vehicle pairing when logged in to the Drive App

Drive App Add-Ins

Personal Mode

Web-based tracking

Web-based trip log

Support for multiple map types and views

Unlimited customer zone importing, editing and creation (geofencing)

Notifications on zone entry/exit

Flexible group structure for vehicles, zones (customers), users, rules, drivers, and reports

Powerful and customizable business exception rules

Combination exception rules

Email, web-based popup, text message, and web service call notifications on rule exceptions

Roadside Add-In for towing, locksmith, battery boost, fuel delivery, flat tire change, and more

(USA and Canada only, Complimentary roadside assistance for light-duty vehicles with GO Plan or ProPlus subscription (one-year free trial, expiring at the end of 2025)

(* Pay Per Event)

Personal Mode

Collision Reconstruction Add-In

Speeding

After-hours usage

Productivity (idling, arrival/departure times, and more)

Backup when leaving

Engine diagnostics and issues

Dangerous driving (acceleration, braking, cornering)

(† Braking Only)

Seatbelt usage

Collision

Low battery warning

Engine misuse (over-revving)

Custom Reports

California Air Resources Board (CARB) Clean Truck Check Program Emissions Diagnostic Report - allows fleets operating in or driving through California to easily comply with state environmental rules with one of the few continuously connected solutions that support both the J1939 and J1979 protocols.

Data Connector, bring curated data into popular BI Tools (also available as paid Add-In)

Over 30 built-in reports

Customizable dashboards and reports

Trending dashboards and reports

Report scheduling

Private vs. Business mileage

IFTA fuel tax reports

Driver scoring reports

Risk management reports (insurance use case)

Customer stops by zone report

Driver congregation report

Customizable work hours, time off, and timecard reports

Collision reconstruction report

(Reports for devices on Base and Regulatory mode will not include Accelerometer information)

Find nearest vehicle to location including distance

Maintenance reminders scheduled by time or distance

Maintenance schedules based on time, distance, odometer, engine hours

Unlimited users

Flexible user access control — features can be hidden or limited based on user or vehicle groups

Ability to audit all database actions

Scalable — up to 50,000 devices in one database

One year of cloud storage with tools for local file export

Industry best practices for security