GO Anywhere Quick Start Guide
Quick start guide for adding, activating, mounting, and validating the GO Anywhere device.
GO® Anywhere™ is a compact, rugged asset tracker that provides reliable location updates for powered and non-powered assets, with seamless integration into MyGeotab.
In the box
Confirm that the GO Anywhere device and all mounting components are included before installation.
Check the package contents against the items and quantities below.
Item | Quantity | Image |
|---|---|---|
GO Anywhere device | 1 | |
Mounting screw, type 1 | 3 | |
Mounting screw, type 2 | 3 | |
Threaded mounting magnet | 3 | |
Mounting washer | 3 | |
Device identification label | 4 |
Installing the GO Anywhere
Install and activate the GO Anywhere device, mount it with the supplied screws or magnets, and validate it with the installation tool.
1. Add assets
In MyGeotab, navigate to the Assets Page and add the GO Anywhere device. Refer to Adding a single asset.
2. Activate
Ensure you are outside, then remove the magnetic strip. The LED will flash.
| LED state |
What the device is doing and what to do |
|---|---|
| Flashing green | Activation in progress. Do not touch or move the device. |
| Solid green |
Activation successful. No action required. |
Flashing red |
Activation failed. Contact Support. |
Solid red | Activation failed. Check temperature (operating range: −40 to +60°C) and cell network, then retry. Re-try activation: Re-apply magnetic strip and leave it in place for 5 seconds. Remove the magnetic strip and check the LED status. |
3. Mount
Place the device in its desired location using either the provided screws or magnets. Ideal mounting location should have a clear view of the sky with minimal metal obstruction.
Option 1: Mounting with screws
Option 2: Mounting with magnets
4. Validate
Validate the installation using the Geotab installation tool at install.geotab.com.
Warnings and important safety information
Read and follow these warnings and safety information before installing the GO Anywhere device.
Warnings
Warning:
Some installations are not straightforward and must be completed by an Authorized Installer to ensure a secure installation. Some examples requiring professional installation from an Authorized Installer are if the device may not be fully secured and could vibrate loose, get knocked or if the installer questions their ability to complete a secure installation according to these instructions.
Warning:
The accompanying mounting magnets can cause serious injury or death if ingested. Keep away from children.
Warning:
The magnets are strong and may cause harm if mishandled. Always slide the magnets when trying to separate or join them to avoid personal injury or damage.
Warning:
Always read and follow all safety information, including Important Safety Information and Limitations. For the latest version of the Limitations of Use, please visit: goo.gl/k6Fp0w.
Note:
Always get permission before you drill, and inspect the area to ensure no adjacent equipment will sustain any damage.
Caution:
These magnets produce a strong magnetic field that can interfere with or damage magnetic-sensitive media and electronics, such as credit cards, hard drives, and small devices.
Important safety information and limitations of use
Always read and follow all safety information, including Important Safety Information and Limitations.
For the latest version of the Limitations of Use, please visit: goo.gl/k6Fp0w.