GO9B installation
Prepare for GO9B use and find the steps to install the device.
For basic installation guidance, refer to GO9B installation instructions.
GO9B installation warnings
Read the warnings before fitting a GO9B device to a vehicle.
Read and follow all safety information, including limitations of use, before installation. Failure to follow these instructions and warnings can result in loss of vehicle control, serious injury, or vehicle damage.
Do not install, reconfigure, or remove this product while the vehicle is in motion or otherwise in operation. Complete all installation, configuration, and removal work only when the vehicle is stationary and securely parked.
Attempting to service devices while the vehicle is in motion could result in malfunctions or collisions, leading to death or serious personal injury.
Secure all in-vehicle devices and related cabling, and keep them clear of vehicle controls, including the gas, brake, and clutch pedals. Use a cable tie to secure the device or extension harness to the OBD connector. Secure both sides of the harness. Without a cable tie, vehicle vibration can loosen the connection and indirectly cause engine computer failure, loss of vehicle control, or serious injury. Inspect devices and cabling regularly to confirm that they remain securely attached.
If a vehicle warning light illuminates after installation, or the vehicle stalls or has a marked decrease in performance, shut off the engine, remove the device, and contact an authorized Partner.
Continuing to operate a vehicle with these symptoms can cause loss of vehicle control, and serious injury.