GO9 RUGGED installation
Prepare to install a GO9 RUGGED device and check that it works.
For questions during installation, refer to the GO9 and GR9 Installation FAQ.
For basic installation guidance, refer to GO9 RUGGED installation instructions.
GO9 RUGGED installation warnings
Read the warnings to help avoid harm when installing the device.
Professional Installation Required
Installation of the GO device requires that the installer have sufficient technical knowledge and expertise for mobile device installation and integration into modern vehicles, such as a Certified Geotab Installer certification or equivalent.
Read and follow all safety information, including limitations of use, before installation. Failure to follow these instructions and warnings can result in loss of vehicle control, serious injury, or vehicle damage.
Do not install, reconfigure, or remove this product while the vehicle is in motion or otherwise in operation. Complete all installation, configuration, and removal work only when the vehicle is stationary and securely parked.
Attempting to service devices while the vehicle is in motion could result in malfunctions or collisions, leading to death or serious personal injury.
Secure all in-vehicle devices and related cabling, and keep them clear of vehicle controls, including the gas, brake, and clutch pedals. Use a cable tie to secure the device or extension harness to the OBD connector. Secure both sides of the harness. Without a cable tie, vehicle vibration can loosen the connection and indirectly cause engine computer failure, loss of vehicle control, or serious injury. Inspect devices and cabling regularly to confirm that they remain securely attached.
If a vehicle warning light illuminates after installation, or the vehicle stalls or has a marked decrease in performance, shut off the engine, remove the device, and contact an authorized Partner.
Continuing to operate a vehicle with these symptoms can cause loss of vehicle control, and serious injury.