GO9 RUGGED harnesses and pinouts

Learn how to route harness wires and keep the device and its connectors weatherproof.

For professional installation where specific cable routing is required, the terminals on the weather-resistant connectors can be de-pinned on both the GO9 RUGGED and the corresponding HRN-RS12S2 and HRN-RX06S4 harnesses. This allows the installer to route the wires through a smaller opening. The wires can then be re-pinned into the connectors as described in the pinout tables. In this manner, the GO9 RUGGED can be installed in restricted spaces while maintaining its IP68 rating.

The GO9 RUGGED and its connectors are IP68-rated. The HRN-RX06S4 and HRN-RS12S2 are only IP67-rated in part, and the gray connectors are the only weatherproof elements. Removal of the gray connectors on either the GO9 RUGGED or its harnesses will reduce the overall weatherproofing of the system. Figure 1 illustrates the scope of the weatherproofing for the GO9 RUGGED and its harnesses:


The blue area marks the weatherproof parts of GO9 RUGGED and its harness connectors.

Figure 1: The blue region highlights the scope of the IP68 rating.

HRN-RS12S2/GO9 RUGGED - ALDL diagnostic port connector

Match each pin to its wire color and role on the GO9 RUGGED ALDL port.

Note:

Not all pins are populated on all vehicles.

Pin

Wire Color

Description for ALDL Port

1

Orange

Ground (Signal Shield)

2

Green/White

CAN Low / TTL CAN Low

3

Blue/White

L Line

4

Brown/White

J1850 ( − ) / MODBUS

5

Purple/White

Make/Model Specific

6

Gray

Make/Model Specific

7

Brown

Make/Model Specific

8

Pink

Make/Model Specific

9

Black

J1850 ( + ) / MODBUS

10

Green

K Line

11

Yellow

CAN Line / TTL CAN High

12

Orange/White

Power (12 V/24 V)

HRN-RX06S4 - IOX port connector

Match each pin to its wire color and role on the HRN-RX06S4 IOX port.

Pin

Wire Color

Description for ALDL Port

1

Red

Power

2

White

CAN Low

3

Yellow

Wake-Up

4

Black

Ground

5

Green

CAN High

6

Not applicable

Not applicable

GO9 RUGGED - IOX port connector

Match each pin to its wire color and role on the GO9 RUGGED IOX port.

Pin

Wire Color

Description for ALDL Port

3

Black/White

Power

2

Blue

CAN Low

4

White

Ground

5

Purple

CAN High