GO Focus Plus and OEM telematics
GO Focus Plus supports OEM telematics installations where telematics comes from the vehicle itself, without a Geotab GO device.
GO Focus Plus supports OEM telematics (that is, telematics comes from the vehicle itself; there is no GO device in the vehicle). The quality of the telematics data is inferior without a GO device. One of two cables must be purchased to connect the GO Focus Plus to an OEM video telematics-enabled vehicle.
Auto-pairing of the GO Focus Plus camera is not available for OEM installations.
3-Wire Power Cable
The GO Focus Plus 3-Wire Power Cable (HRN-IOXGFP-3W) connects the GO Focus Plus directly to the vehicle fuse box and includes an optional Panic Button connector.
The GO Focus Plus connects to the 3-Wire Power Cable which connects to the vehicle's fuse box. The GO Focus Plus 3-Wire Power Cable (HRN-IOXGFP-3W) must be purchased separately. There is an optional connector on the 3-Wire Power Cable for a Panic Button.
Wire |
Color |
Connects to |
|---|---|---|
ACC |
Red |
Accessory/Ignition |
B+ |
Yellow |
Power (12–24 VDC) |
GND |
Black |
Ground |
OBD Power Cable
The GO Focus Plus OBD Power Cable (HRN-IOXGFP-OBD) connects the GO Focus Plus to the vehicle's OBD-II port, with an optional Panic Button connector for discreet installation.
The GO Focus Plus connects to the OBD Power Cable which connects to the vehicle's OBD-II port. The GO Focus Plus - OBD Power Cable (HRN-IOXGFP-OBD) must be purchased separately.
An optional Auxiliary Panic Button (HRN-IOXGFOBD-PBTN) can be connected to the OBD plug of the OBD Power Cable for a discreet installation (for example, under the steering column).
GO Focus Plus I/O Cable
The GO Focus Plus I/O Cable is available by approval only and consists of a 3-cable bundle including a Y Cable, OBD Power Cable, and Signal Cable.
The GO Focus Plus I/O Cable is available by approval only. To purchase this cable, contact your Geotab representative.
The GO Focus Plus I/O Cable consists of a 3-cable bundle:
Cable | Length |
|---|---|
Y Cable | 1.5 m / 5 ft |
OBD Cable | 1.5 m / 5 ft |
Signal Cable | 1.0 m / 3.3 ft |
I/O OBD Cable pinout
BUS/Protocol/Purpose | OBD-II Connector Pins |
|---|---|
CAN | 6, 14 |
J1939 | 6, 14 |
Power | 4, 16 |
I/O Signal Cable pinout
Wire | Color | Connect to | Connection |
|---|---|---|---|
ACC | Red | Accessory/Ignition | Mandatory |
GND | Black | Ground | Mandatory |
Reverse | Orange | Not in use / Do not connect | Not in use / Do not connect |
Speed Pulse | Blue | Not in use / Do not connect | Not in use / Do not connect |
Input 1 | Yellow | Digital Input (5 V) | Optional |
Input 2 | Purple | Digital Input (5 V) | Optional |
Input 3 | Brown | Digital Input (5 V) | Optional |
Output | Grey | Digital Output (3.3 V) | Optional |
RS232 TX OUT | Green | RS232 TX Out (To vehicle) | Optional |
RS232 TX IN | White | RS232 TX In (From vehicle) | Optional |