Product overview

The GO Focus Plus is a compact, intelligent dash cam designed to improve fleet safety. It combines advanced artificial intelligence, Advanced Driver Assistance Systems (ADAS), Driver Monitoring Systems (DMS), and telematics data into one seamless solution. Adjustable road-facing and driver-facing* lenses provide flexible installation across different vehicle types and driver heights.

* Driver-facing camera only available on certain models.

Key features

1. Easy installation: Auto-pairs and self-calibrates to eliminate common installation hassles.
2. Real intelligence: Geotab’s advanced AI models are tuned to minimize false positives and negatives.
3. Effective, focused coaching: Real-time voice safety alerts and a supporting mobile app help drivers build safer habits before collisions occur.

Technical specifications and features

For a comprehensive table of technical specifications and features, please refer to pages 3-4 of the GO Focus Plus specifications brochure.

LED indicators

Installation instructions

Installation instructions for the GO Focus Plus are available here.

Important safety information and limitations of use

WARNING! Your in-vehicle devices must be kept clear of debris, water, and other environmental contaminants. Failure to do so may result in units malfunctioning or short-circuiting that can lead to a fire hazard or vehicle damage or serious injury.

NOTICE: This product does not contain any user-serviceable parts. Configuration, servicing, and repairs must only be made by an authorized reseller or installer. Unauthorized servicing of these products will void your product warranty.

WARNING! Do not attempt to install, configure, or remove any product from any vehicle while the vehicle is in motion or otherwise in operation. All installation, configuration, or removal must be done only in stationary vehicles which are securely parked. Attempting to service units while being operated could result in malfunctions or accidents, leading to death or serious personal injury.

WARNING! If at any point after an in-vehicle device is installed a warning light illuminates on the vehicle dash or the vehicle stalls or has a marked drop in performance, shut off the engine, remove the device, and contact your reseller. Continuing to operate a vehicle with these symptoms can cause loss of vehicle control, and serious injury.

WARNING! Do not attempt to remove the devices from the vehicle in which they are originally installed for installation in another vehicle. Not all vehicles share compatibility, and doing so may result in unexpected interactions with your vehicle, including sudden loss of power or shutdown of the vehicle’s engine while in operation or cause your vehicle to operate poorly or erratically and cause death or serious injury and/or vehicle damage.

For the latest version of the Limitations of Use, refer to https://gtb.link/k6Fp0w

Regulatory statements

Warning: RF exposure compliance

The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Users and installers must be provided with antenna installation instruction and transmitter operating conditions for satisfying RF exposure compliance.

L'antenne ou les antennes utilisées pour cet émetteur doivent être installées pour fournir une distance de séparation d'au moins 20 cm de toutes les personnes et ne doivent pas être co-localisées ou fonctionner en conjonction avec une autre antenne ou émetteur. Les utilisateurs et les installateurs doivent recevoir des instructions d'installation de l'antenne et les conditions de fonctionnement de l'émetteur pour satisfaire la conformité à l'exposition aux RF.

Canada

CAN ICES-003 (B) / NMB-003 (B)

This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions:

1. This device may not cause interference.
2. This device must accept any interference, including interference that may cause undesired operation of the device.

L’émetteur/récepteur exempt de licence contenu dans le présent appareil est conforme aux CNR d’Innovation, Sciences et Développement économique Canada applicables aux appareils radio exempts de licence. L’exploitation est autorisée aux deux conditions suivantes :

1. L’appareil ne doit pas produire de brouillage;
2. L’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en compromettre le fonctionnement.

USA

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

✱ NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

1. Reorient or relocate the receiving antenna.
2. Increase the separation between the equipment and receiver.
3. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
4. Consult the dealer or an experienced radio/TV technician for help.

Changes or modifications not expressly approved by Geotab could void the user’s authority to operate the equipment.

EU

1. 703-748 MHz: Max 27.3 dBm EIRP
2. 824-862 MHz: Max 26.5 dBm EIRP
3. 880-915 MHz: Max 26.5 dBm EIRP
4. 1710-1785 MHz: Max 28.5 dBm EIRP
5. 1920-1980 MHz: Max 28.0 dBm EIRP
6. 2303-2398 MHz: Max 28.4 dBm EIRP
7. 2402-2480 MHz: Max 5.90 dBm EIRP
8. 2412-2472 MHz: Max 13.90 dBm EIRP
9. 2500-2570 MHz: Max 28.2 dBm EIRP
10. 2570-2620 MHz: Max 28.2 dBm EIRP
11. 5150-5350 MHz: Max 14.90 dBm EIRP
12. 5470-5725 MHz: Max 14.60 dBm EIRP
13. 5725-5850 MHz: Max 13.00 dBM EIRP

Germany

Wir besitzen keine Versand- und Lagerfläche in Deutschland und sind nicht von der Rücknahmepflicht nach § 17 ElektroG betroffen.

Brazil

Conforme resolução Anatel 680 - Art. 5º - Os equipamentos de radiação restrita devem conter no produto, em lugar facilmente visível, ou no manual de instruções fornecido pelo fabricante, em local de destaque, informação sobre as implicações de sua operação, nos seguintes termos: Este equipamento não tem direito à proteção contra interferência prejudicial e não pode causar interferência em sistemas devidamente autorizados. Para maiores informações, consulte o site da ANATEL (www.anatel.gov.br).