跳至内容
支持中心
帮助文章学院社区
家社区HardwareGO deviceBattery/Power isolators - trucks/heavy plant

Battery/Power isolators - trucks/heavy plant

已解决
Hardware
GO device
B
B
BPennAU
原帖作者

If an asset is stopped (ignition off) but not isolated on the battery/power, what data will it still be recording? Could it possibly be giving an idling read due to the isolator being off & falsely thinking that the ignition is actually on? Go9/harness device direct to OMB.

2 条回复
加入讨论

You need to be logged in to reply to this post and participate in the Geotab Community discussions.

最佳答案

T
T
Tony_M

@BPennAU It depends on how the device is installed but usually if it's installed via OBD then the device is looking for an RPM value from the truck. If the RPM is 0 then it'll register as ignition off and the device will go to sleep. If the RPM is higher than 0 then it'll register as ignition on and start tracking idling hours.

最佳答案

2 条回复

T
T
Tony_M

@BPennAU It depends on how the device is installed but usually if it's installed via OBD then the device is looking for an RPM value from the truck. If the RPM is 0 then it'll register as ignition off and the device will go to sleep. If the RPM is higher than 0 then it'll register as ignition on and start tracking idling hours.

最佳答案
B
B
BPennAU
原帖作者

@Tony_M Thank you - that was my thought as well but just wanted confirmation from another brain! I've adjusted my report to include rpm to reflect true idling.

还有其他问题吗？
与学院一起学习浏览文档