Hey Everybody, I am trying to identify some issues with how MyGeotab identifies power loss in a Surfsight camera for use with Exceptions. For example, I have a camera that has been offline for over a month.  I can see a Camera fault: all power removed - device restarted (1. Fault occurred) fault for the day that it went out, but exactly 1 second after the measurement was triggered it goes back to 0. So, I'm beginning to think that this fault is only catching when it happens, but not remaining on for the duration of the time the camera is out. Does anyone know if this is expected behavior? I also have 18 instances of the Road-facing camera status (0. DECALIBRATED, 1. CALIBRATION_IN_PROGRESS, 2. CALIBRATION_COMPLETE, 3. ADJUSTMENT_SUGGESTED, 4. ADJUSTMENT_REQUIRED) fault set to 0 (DECALIBRATED) for the same day the camera went out (which occur both before and after that power-removed fault). So, I guess I'm wondering if anyone knows how to find a measurement that indicates if a Surfsight camera has gone out and, if so, if that measurement will remain in the "yes-this-camera-has-gone-out" state until the camera comes back online. Thanks in advance for any help you guys can provide!  :) Best,Joy B

Identifying Surfsight Camera Power Loss

Hey Everybody, I am wanting to understand the newer lockout feature for users better.  I understand from the documentation that users get locked out for five minutes after 5 unsuccessful login attempts, and for ten minutes for any attempts after that. What I'm wondering is how long after the initial failed logins it takes before the user gets 5 unsuccessful attempts again without the ten minutes of delays. Thanks for any help you guys can provide. Best,Joy B

Managing Account Lockouts - When Does Lockout Period Reset?

Hey, Everybody! I'm wondering about the MyGeotab Cold Chain Add-In, as I can't find any trace of it in my DB:Cold Chain User Guide Does anyone know if this still exists?  If so, how does one access it? Thanks very much!  :) Best,Joy B

MyGeotab Cold Chain Add-In Access

Hey Everybody, I'm trying to learn more about the ADP integration with Geotab:https://marketplace.geotab.com/solutions/adp/solution-support/ If anyone has experience working with this and would be willing to reach out to discuss, I'd certainly appreciate it. Best,Joy B joy@telematics411.com(440) 880-0411

Does anyone have experience setting up an ADP integration?

Hey Everybody, I'm using a MyPreview database to test some new functionality and I'm wondering what the Linked assets button is for.  Is this for assets that are shared with Extendable Services or is this some other new feature we haven't yet been made aware of (or that I missed somewhere in an update)? Thanks very much for any info you can provide!  :) Best,Joy B

What are "Linked assets" in MyGeotab?

page-user page-user-joy-bailer-1751 template-account-profile page-status-200 theme-harmony user-guest

Company

Title

Hey, <a href="/user/liznell-torres-8141" data-id="8141" data-value="LTorr-8141" data-denotation-char="@" class="text-decoration-none mention">@LTorr-8141</a>​! You may have to reach out to your Geotab reseller to have them revert this on their side. You can find your reseller's contact info in MyGeotab under Support &gt; Contact Information. Hope this helps get you pointed in the right direction! :) Best,Joy B

Upgraded version

Hey, <a href="/user/mauricio-lorenzetti-2129" data-id="2129" data-value="MLore-2129" data-denotation-char="@" class="text-decoration-none mention">@MLore-2129</a>​! In order to download the IFTA report, you need to go to Compliance &gt; IFTA Report. From there you will see a Filters option where you can set the date range and select individual assets to run the report on. If your vehicles are already split up so that you have your cars and trucks assigned to different Groups, you may be able to use the Groups dropdown to choose only that group instead of having to select your cars individually. (I say "may" because I am currently having some difficulty getting the Groups filter on that page to work in my demo database.) Anyway, hopefully this helps you get what you need. Reach out if you have further questions. :) Best,Joy B

I can able to download the ifta report for my cars.but not my trucks.i need trucks ifta report asap

Hey, <a href="/user/david-greenfield-1981" data-id="1981" data-value="Davidg-1981" data-denotation-char="@" class="text-decoration-none mention">@Davidg-1981</a>​! Glad this worked for you. The requirement for manual addition this time is likely due to how your Geotab reseller handles adding devices. Some resellers will add those devices in for their customers ahead of time (and it sounds like yours likely does this most of the time), but if your reseller overlooked this step for these devices, that is a likely reason why you had to add them in yourself. Hope this helps shed a little extra light on it. :) Best,Joy B P.S. If your issue is resolved, please consider using the Select as Best option for whichever answer above is the one you found most helpful. That will help the Community to know this one's been resolved. Thanks!

Two Geotab GO devices are not registering in the myGeotab Assets portal.

Hey, <a href="/user/david-greenfield-1981" data-id="1981" data-value="Davidg-1981" data-denotation-char="@" class="text-decoration-none mention">@Davidg-1981</a>​! I wonder if you've added the devices into your database in the MyGeotab software. Here's a short video that goes through the basics:<a href="https://www.youtube.com/watch?v=erSw77KgWhY" target="_blank">Adding Single Assets in MyGeotab</a> (The video is a smidge outdated, but it should point you in the right direction just fine.) Let us know if that gets you what you need, or if you think the issue is something else. :) Best,Joy B

Hey, <a href="/user/justin-kammerer-1720" data-id="1720" data-value="jkamm-1720" data-denotation-char="@" class="text-decoration-none mention">@jkamm-1720</a>​! The more detail at a granular level that can be provided the better. The reality is that sometimes Geotab's products don't work the way they ought to, and equipping resellers, partners, and consultants with the information we need to be able to troubleshoot if something goes wrong provides a twofold value: <ul><li>it helps us to be able to explain it to the customer at the appropriate level of detail, maintaining both our credibility and Geotab's in the midst of something unexpected and frustrating, and</li><li>makes it so that we're more likely to help Geotab get to the bottom of things faster because of our ability to analyze the real-world scenarios at a more boot-on-the-ground level than the devs there usually have opportunity to explore.</li></ul> For the custom-rules question, that's totally going to depend on customer needs on a case-by-case basis, so it's difficult to elaborate on that one. I know it's work, but from my years helping customers for resellers, I can say that having customization options is a great help, and being able to apply the latest and greatest (especially if Geotab is going to tout these features as such) to apply to heavy trucks as well is going to make the product look better to many of their heavy-trucking clients. It's been my experience that the companies with heavy trucks are some of the ones most adamant about their safety programs, so they'll be most likely to be the ones asking about whether or not the new rules can be applied to their vehicles. Hope this extra insight helps. :) Best,Joy B

New GPS Speeding Rules

I would also like some clarification on this, as the production manager's answer doesn't exactly address the question. The standard rules that were what we had previously could not be edited much outside of the few slider options, but we have the pencil icon from which we can quickly access which conditions the standard rules were based off. With these new rules, are the conditions available to build our own custom rules based off of them? If so, given we don't have the quick-access feature via the pencil icon to make our own custom rules from them, can these conditions be provided to us? Thanks for any further insight you can provide on this, Eishi. Best,Joy B

Awesome. Thanks for this extra info, Jamie! :D Best,Joy B

how do i switch on the built in go focus plus nfc reader

Commenting to follow along. Tagging <a href="/user/eishifun" data-id="1044" data-value="EishiFUN" data-denotation-char="@" class="text-decoration-none mention">@EishiFUN</a>​ in so he can maybe help if someone else doesn't chime in before then. :) Best,Joy B

กิจกรรมล่าสุด

Identifying Surfsight Camera Power Loss

Managing Account Lockouts - When Does Lockout Period Reset?

MyGeotab Cold Chain Add-In Access