Hi everyone! I'd like to know if anyone knows what the 'Engine data (0 = inactive / 1 = active)' measurement means and what it could be used for. Does anyone have more info on this? Thanks in advance!

Engine data (0 = inactive / 1 = active) Measurement

Hello community,I'm reaching out with a few questions regarding the GO Focus cameras.I noticed they are installed to the GO device in the same way as IOX expansions. My questions are the following: What is the maximum number of IOX devices that can be connected (not counting the camera)? I understand that up to 5 IOX expansions can be connected; if so, does the camera count as one of those IOX units?Additionally, I understand that in installations with more than one IOX, the camera should be the last one in the daisy chain. Does the GO Focus function as the termination shunt?I appreciate your comments and feedback.

Go Focus Camera

Hello Geotab Community, I'd like to ask a quick question about the notifications shown in the assets section. As you know, alerts like "Low battery" or "Loose installation" appear, which helps us identify small issues with a vehicle. My question is: once these issues are resolved, do the notifications disappear on their own or do they have to be dismissed manually (I know that's an option)? If they disappear on their own, how long does it take? In the case of the low battery alert, do you know why it doesn't change automatically once the battery is replaced? Thank you in advance for your comments. Best regards,  069Pd00000ZExTtIAL.png


Low Battery Alert Duration and General Notifications in MyGeotab

Good day community, I hope you are all doing well. I am conducting research for one of my company's clients. While reviewing the "collisions and log data," I came across the following records that match the period when the GO device stopped sharing data: GprsActivatedGprsResponseModeGprsModemPowerOffGprsModemDisconnectingGprsModemPowerOnInvalidGpsReason My question is, what do the previous records refer to?  Thank you in advance for your comments.

Records found in collisions and log data

page-user page-user-marco-rosas-1979 template-account-profile page-status-200 theme-harmony user-guest

Company

Title

["Map Server Updates Group"]

A broadcast-only group for customers and resellers to receive monthly and quarterly Map Server Updates in MyGeotab.

Map Server Updates Group

Hello Joel, after some investigation, I found the following information. Perhaps <a href="/user/eishifun" data-id="1044" data-value="EishiFUN" data-denotation-char="@" class="text-decoration-none mention">@EishiFUN</a>​  can provide further details regarding this:<ul><li>Viewing Window: MyAdmin typically displays the date of the last GPS or engine record, provided it occurred within the last 30 days.</li><li>Expiration Behavior: If the device has not transmitted a new GPS log or engine data (such as RPM, odometer, or fuel level) for more than a month, the system stops displaying the previous date, and the field resets to 'No data'.</li></ul>

Data retention period for "Last GPS" and "Last Engine" records in MyAdmin

Hi everyone! I'd like to know if anyone knows what the 'Engine data (0 = inactive / 1 = active)' measurement means and what it could be used for. Does anyone have more info on this? Thanks in advance!

Hi Eishi, thank you for the information.I have a follow-up question: Does having the GO Focus installed limit the total number of IOX units allowed, or can we still have up to 5 (the camera plus 4 others)? I'm asking specifically because of the power consumption of the camera and whether it impacts the capacity of the daisy chain.Best regards!

Hello community,I'm reaching out with a few questions regarding the GO Focus cameras.I noticed they are installed to the GO device in the same way as IOX expansions. My questions are the following: What is the maximum number of IOX devices that can be connected (not counting the camera)? I understand that up to 5 IOX expansions can be connected; if so, does the camera count as one of those IOX units?Additionally, I understand that in installations with more than one IOX, the camera should be the last one in the daisy chain. Does the GO Focus function as the termination shunt?I appreciate your comments and feedback.

Hello Eishi,It's always a pleasure to greet you.Thank you for your input. Just to confirm, does that 10-day period apply to all similar notifications or only to the low battery alert?

Hello Geotab Community, I'd like to ask a quick question about the notifications shown in the assets section. As you know, alerts like "Low battery" or "Loose installation" appear, which helps us identify small issues with a vehicle. My question is: once these issues are resolved, do the notifications disappear on their own or do they have to be dismissed manually (I know that's an option)? If they disappear on their own, how long does it take? In the case of the low battery alert, do you know why it doesn't change automatically once the battery is replaced? Thank you in advance for your comments. Best regards, <a href="/forum/plugins/gcs-uploads/files/069Pd00000ZExTtIAL.png" target="_blank"> 069Pd00000ZExTtIAL.png</a>

Eishi, thanks so much for the information. This, along with what Tony mentioned, makes it clearer to me what these records are referring to

Tony, Eishi, how are you? I thank you for your prompt response and support. Thanks to you, I have a clearer understanding of what those types of records indicate. Regarding InvalidGPSReason, what kind of problems could cause the GO to show that type of record? Although the unit is currently communicating normally, I would like to better understand that concept for future reference.

Good day community, I hope you are all doing well. I am conducting research for one of my company's clients. While reviewing the "collisions and log data," I came across the following records that match the period when the GO device stopped sharing data: <ul><li>GprsActivatedGprsResponseMode</li><li>GprsModemPowerOff</li><li>GprsModemDisconnecting</li><li>GprsModemPowerOn</li><li>InvalidGpsReason</li></ul> My question is, what do the previous records refer to?  Thank you in advance for your comments.

Activitate recentă

Engine data (0 = inactive / 1 = active) Measurement

Go Focus Camera

Low Battery Alert Duration and General Notifications in MyGeotab