Hi <a data-id="9561" data-value="DRich-9561" data-denotation-char="@" href="/user/drich-9561" class="text-decoration-none mention">@DRich-9561</a> , thanks for clarifying. Yes, photos would help. If you can please share clear views of both sides of the dashcam and the area under the SD-card cover, with the serial number and IMEI hidden. Surfsight's AI-12 guide describes a pinhole Reset button on the side, under the SD-card cover, but says a short press only restarts the camera. It does not factory-reset it. For a forgotten PIN, Surfsight documents an authorized factory-reset API option for reseller partners and organization administrators: POST &#x2F;devices&#x2F;{imei}&#x2F;factory-reset. If the camera is offline, the reset takes effect when it next comes online. A factory reset removes the camera's user settings and password but does not format the SD card. If you only need to regain access, that may be worth checking before doing a full factory reset. Here are some guides I found Retrieve device PIN codes (https:&#x2F;&#x2F;developer.surfsight.net&#x2F;openapi&#x2F;surfsight&#x2F;operation&#x2F;getDevicePinCodes&#x2F;) · Retrieve device settings (https:&#x2F;&#x2F;developer.surfsight.net&#x2F;openapi&#x2F;surfsight&#x2F;operation&#x2F;getDeviceConfig&#x2F;) · Update device settings (https:&#x2F;&#x2F;developer.surfsight.net&#x2F;openapi&#x2F;surfsight&#x2F;operation&#x2F;putDeviceConfig&#x2F;) · Factory reset (https:&#x2F;&#x2F;developer.surfsight.net&#x2F;openapi&#x2F;surfsight&#x2F;operation&#x2F;postFactoryReset&#x2F;) · API authentication (https:&#x2F;&#x2F;developer.surfsight.net&#x2F;developer-portal&#x2F;basic-authentication&#x2F;)

Surfsight AI-12 - Factory reset options?

I wanted to follow up on this and let you know I did not find a way to do this. If this is something you have a need for or would just like to see I would encourage you to submit some feedback using the feedback form at the bottom of this page. It will go straight to our product team to let them know our customers would like to have this functionality.

Webhook Payload: Passing Snapshot Images or URLs for Custom Rules (GO Focus Plus)

Hey everyone, Wanted to share some useful info that came up recently around Geotab GO device installations — specifically around antenna orientation and how it affects GPS performance. This information doesn't seem to be commonly known and is CRITICAL for anyone that deals with GO Device Hardware. The Antenna Is Directional and is located on the UNDERSIDE/BOTTOM of the device!Contrary to what you might assume, the internal GPS antenna in Geotab GO devices is directional — not omnidirectional like your phone's antenna. It's physically located on the underside of the device, beneath the printed label/logo.When the device is plugged directly into the OBD-II port under the steering column, the antenna faces downward toward the floor. However, this still works because GPS signals bounce off the asphalt and the vehicle's metallic chassis floor, acting as a reflector. So, although it may not be ideal, it is functional by design for standard plug-in installs. Remember, the designing engineers have to create a product that is as forgiving as possible- the end result is a compromise and results in hardware that is functional in the broadest array of installations/applications. Hidden/Harness Installs? Flip It UpwardIf you're using a T-harness or extension cable to tuck the device inside the dash, the rules change. Geotab's own GO9 support guidelines say you should orient the device with the label/antenna side facing up toward the sky whenever possible. Direct line-of-sight to the satellites overhead gives you: Faster GPS latch times on startupLower Position Dilution of Precision (PDOP)More accurate, consistent tracking data Getting this wrong (antenna pressed against metal, or facing the wrong way in a hidden install) can result in "straight-lining" on your fleet maps — where the system can't get a valid lock and just draws a straight line between the last two known good coordinates. How Glass Affects the SignalThe impacts of vehicle glass is often forgotten or overlooked, but nonetheless critical to performance and stability. Here's a quick breakdown: Glass Type / GPS Impact Standard clear glass / ✅ No impact — GPS passes right throughNon-metallic aftermarket tint (dyed/carbon) / ✅ No impact — signal-safeMetallic/hybrid tint / ❌ Significant degradation — metal particles create a Faraday shielding effectCeramic tint / ✅ No impact — heat-rejecting but signal-friendlyFactory solar/athermic windshields / ❌ Significant degradation — thin metal oxide layer blocks signal If your vehicles have factory "acoustic" or solar-reflective glass (very common in newer model years), be aware that tucking the device under the dash and relying on windshield pass-through may cause issues. Pro tip: Look for the dot matrix zone — the black speckled band typically found near the rearview mirror mount. Manufacturers intentionally leave this area free of metal oxide so that devices like toll passes and telematics units can receive signals through the glass. This is often the best spot to aim for signal penetration. Hope this helps someone avoid a head-scratcher during their next install!Thanks!!!  (Mods: feel free to move if there is a better place for this info to reside)

FYI: Geotab GO Device Antenna Orientation & Signal Quality — IMPORTANT INFO You Need to Know!

You would need to search the device by serial number in MyAdmin- (Devices &gt; Device Management) - IF the device is able to read and automatically associate with the vehicle it is installed in, the VIN will show in the results. If your MyAdmin view doesn't already have a VIN column header showing, then you can click &quot;Customize View&quot; on the upper right and make sure VIN is checked off and the column will display. Hope this helps! Thanks!

Asset identification using MyAdmin

The "Cellular modem signal strength" status record under the Engine Measurements section is basically the strength of the signal the device is receiving. In context of a cellular phone, as a similar example, this would relate to the amount of signal bars you have on your cellular phone. In regards to the possible values and their meanings, this gets a little more tricky- Reason being, values may fall in completely different thresholds depending on the generation of the tech, as well as the network provider. However, generally speaking, the easiest way to look at it is that the LOWER the (ABSOLUTE) number is, the BETTER the signal is (to make it easy to remember, consider that the values are expressed in negative numbers, so -1 is actually more than -100). (I've compiles some more Geotab-specific info below for reference) Values and Network Quality Range Geotab GO devices typically report this measurement directly in dBm (decibels relative to one milliwatt). Because cellular signal strength is measured as a negative value, a smaller negative number indicates a stronger, healthier signal. Here is a general breakdown of how to interpret the dBm values regarding network quality: dBm Range,Signal Quality,Description-50 to -70 dBm, Excellent,"Perfect signal strength. The device has a strong, stable connection and will upload telemetry data in near real-time without issue."-70 to -85 dBm, Very Good / Good,Solid connection. Plenty of signal for reliable data transfers and normal operations.-85 to -95 dBm, Fair,"Acceptable connection. Data will still transmit fine, but the device may occasionally experience slight delays if the signal dips lower."-95 to -110 dBm, Poor,"Weak signal. The device might experience delayed packet updates, dropped connections, or intermittent live tracking updates."-110 dBm or lower, No Signal / Dead Zone,Extremely weak or completely disconnected. The GO device will log and store its telemetry data on its internal flash memory until it reconnects to a stronger network. I hope this helps! Thanks!

"Cellular modem signal strength" record meaning

Have you tried using the Asset Sharing link feature that is built into Geotab? (I tried to provide instructions on how, but Geotab refuses to let me submit the response if I include the instructions- for some bizarre reason)

Direct URL hyperlink to open to a vehicle/asset

It was my understanding that, although the standard&#x2F;free versions of Gemini do not directly support MCP connections, the Enterprise - Business version does support them (as a &quot;Pre-GA&quot; feature). I may be missing something, so I'll provide a link for reference: https:&#x2F;&#x2F;support.google.com&#x2F;g&#x2F;answer&#x2F;17106276?hl=en Thanks!

Gemini availability for Geotab MCP Connector

Hello Community! I'm looking for some information or guidance on how-to complete a factory reset on a Surfsight AI-12 Dashcam with a forgotten pin (that was modified &#x2F; is NOT &quot;3333&quot;)- or if there is even an alternate process available. For context: I found a Geotab article (included below for reference) that states a factory reset can be completed via a hidden hardware reset key on Surfsight cams.... However, I confirmed that the info in the article is NOT accurate  (I physically inspected a Surfsight AI-12 and confirmed that there are NO hidden hardware reset keys present). Thanks in advance for your help! Link to article referenced above: <a href="https://community.geotab.com/s/article/How-to-physically-troubleshoot-Surfsight-cameras?language=en_US#:~:text=Perform%20a%20Hard,of%20the%20dashcam." target="_blank">https:&#x2F;&#x2F;community.geotab.com&#x2F;s&#x2F;article&#x2F;How-to-physically-troubleshoot-Surfsight-cameras?language=en_US#:~:text=Perform%20a%20Hard,of%20the%20dashcam.</a>

Hello! Off the top, the easiest way to share live tracking information externally that comes to mind would be to utilize the asset location sharing feature directly within MyGeotab. A quick rundown on the path to follow: <ul><li>1. Navigate to the Map page.</li><li>2. Find and select the desired asset&#x2F;vehicle either directly on the map or from the asset list on the left-hand side.</li><li>3. Click on Share to open the link configuration menu.</li><li>4. Configure the sharing parameters (such as expiration time or tracking duration) to fit your customer's requirements.</li><li>5. Generate and copy the sharing link to share it accordingly.</li></ul> I am not familiar with Shippeo, so I am unsure of its specific technical requirements or whether these generated links will work for you, but I figured it wouldn't hurt to mention it just in case you weren't already familiar. Hope this helps!

Sending tracking informations from Geotab map to external

page-user page-user-fleetistics-support-8243 template-account-profile page-status-200 theme-harmony user-guest

Company

Title

["Integrators Group"]

A broadcast-only group for receiving Geotab integrations news and updates!

Integrators Group

Hello everyone, I am currently working to assist a customer who has a custom rule configured in conjunction with a GO Focus Plus camera to capture a snapshot whenever the rule's conditions are met. We are trying to determine if there is a supported parameter, placeholder, or payload structure that allows passing a snapshot image or a direct snapshot URL within a web request (webhook) notification to populate an external database&#x2F;table. Specifically: <ul><li>Is it possible to pass snapshot URLs or image data in the webhook payload for custom rules using the GO Focus Plus (regardless of camera orientation)?</li><li>If this functionality is supported, what exact tokens, tags, or placeholders should be configured in the web request setup so the endpoint can receive and parse the snapshot&#x2F;link?</li></ul> Any insight, documentation, or experience with webhook payload capabilities for video&#x2F;snapshot assets would be greatly appreciated! Thank you!

Hey everyone, Wanted to share some useful info that came up recently around Geotab GO device installations — specifically around antenna orientation and how it affects GPS performance. This information doesn't seem to be commonly known and is CRITICAL for anyone that deals with GO Device Hardware. The Antenna Is Directional and is located on the UNDERSIDE/BOTTOM of the device!Contrary to what you might assume, the internal GPS antenna in Geotab GO devices is directional — not omnidirectional like your phone's antenna. It's physically located on the underside of the device, beneath the printed label/logo.When the device is plugged directly into the OBD-II port under the steering column, the antenna faces downward toward the floor. However, this still works because GPS signals bounce off the asphalt and the vehicle's metallic chassis floor, acting as a reflector. So, although it may not be ideal, it is functional by design for standard plug-in installs. Remember, the designing engineers have to create a product that is as forgiving as possible- the end result is a compromise and results in hardware that is functional in the broadest array of installations/applications. Hidden/Harness Installs? Flip It UpwardIf you're using a T-harness or extension cable to tuck the device inside the dash, the rules change. Geotab's own GO9 support guidelines say you should orient the device with the label/antenna side facing up toward the sky whenever possible. Direct line-of-sight to the satellites overhead gives you: <ul><li>Faster GPS latch times on startup</li><li>Lower Position Dilution of Precision (PDOP)</li><li>More accurate, consistent tracking data</li></ul> Getting this wrong (antenna pressed against metal, or facing the wrong way in a hidden install) can result in "straight-lining" on your fleet maps — where the system can't get a valid lock and just draws a straight line between the last two known good coordinates. How Glass Affects the SignalThe impacts of vehicle glass is often forgotten or overlooked, but nonetheless critical to performance and stability. Here's a quick breakdown: Glass Type / GPS Impact Standard clear glass / ✅ No impact — GPS passes right throughNon-metallic aftermarket tint (dyed/carbon) / ✅ No impact — signal-safeMetallic/hybrid tint / ❌ Significant degradation — metal particles create a Faraday shielding effectCeramic tint / ✅ No impact — heat-rejecting but signal-friendlyFactory solar/athermic windshields / ❌ Significant degradation — thin metal oxide layer blocks signal If your vehicles have factory "acoustic" or solar-reflective glass (very common in newer model years), be aware that tucking the device under the dash and relying on windshield pass-through may cause issues. Pro tip: Look for the dot matrix zone — the black speckled band typically found near the rearview mirror mount. Manufacturers intentionally leave this area free of metal oxide so that devices like toll passes and telematics units can receive signals through the glass. This is often the best spot to aim for signal penetration. Hope this helps someone avoid a head-scratcher during their next install!Thanks!!!  (Mods: feel free to move if there is a better place for this info to reside)

The easiest way to look at this is that it is a measurement of how CLEAN and STRONG the GPS signal is. . . The higher the value is, the better--  As far as operational threshold, 35 dBHz (or higher) is a good, general rule-of-thumb, value to judge performance by (without looking up the specific hardware capabilities, etc...)-- You are spot on with your reference to the lower values- A device that should otherwise report a high value could report a low value as a result of poor placement (and/or other environmental factors)- This is exactly why it is so critical that customer/installers strongly consider the location/placement of where a device is going to reside in order to realize the best performance available.  I hope this helps! Thanks!

"GNSS: Signal strength indicated by carrier-to-noise ratio (dBHz) of the strongest satellite signal detected" record meaning

Cellular modem radio access technology (RAT) basically refers to the type and generation of cellular network technology being used. . . Think of it in the context of cellular phones, as an example- here are a few: 3G, LTE, HSPA, UMTS, etc. . .  --Regarding the possible values and their respective meanings, 0 = 2G, 2 = 3G, 7 = 4G(LTE), &amp; 8 = LTE-M / CAT-M1 - (See the info below for a more detailed breakdown)  Cellular Modem Radio Access Technology This refers to the type of cellular network a Geotab GO device is connected to.<ul><li>Function: Identifies the network technology (e.g., 2G, 3G, 4G, CATM1) that a GO device uses for internet connectivity.</li><li>How to find in MyGeotab:</li></ul><ol><ol><li>Navigate to Safety &gt; Log data &amp; Collisions.</li><li>Select the vehicle and date range.</li><li>Type "Cellular modem radio access technology" in the search bar.</li></ol><li>The Record Value column will indicate the network type:</li></ol><ul><ul><ul><li>0 = 2G</li><li>2 = 3G</li><li>7 = 4G</li></ul><li>8 = CATM1</li></ul><li>Report: This information can be found in the Log Data and Collisions Report.</li></ul> I hope this helps!

Ostatnia działalność

Surfsight AI-12 - Factory reset options?

Webhook Payload: Passing Snapshot Images or URLs for Custom Rules (GO Focus Plus)

FYI: Geotab GO Device Antenna Orientation & Signal Quality — IMPORTANT INFO You Need to Know!