Hi <a data-id="1044" data-value="EishiFUN" data-denotation-char="@" href="/user/eishifun" class="text-decoration-none mention">@EishiFUN</a> Thank you very much, I will be replicating what was suggested

language change in iox gotalk

<a data-id="1781" data-value="CesarOrtiz-1781" data-denotation-char="@" href="/user/cesarortiz-1781" class="text-decoration-none mention">@CesarOrtiz-1781</a> Excellent answer Thank you Cesar 🙏

How do I configure the Iox NFC so that it only detects keys registered in the database?

Thanks <a data-id="1546" data-value="ssartor" data-denotation-char="@" href="/user/ssartor" class="text-decoration-none mention">@ssartor</a> and <a data-id="1390" data-value="HLui-1390" data-denotation-char="@" href="/user/hlui-1390" class="text-decoration-none mention">@HLui-1390</a> !!

Monitoring PTO Activity on Street Sweepers with Geotab

<a data-id="11876" data-value="trevordaniels" data-denotation-char="@" href="/user/trevordaniels" class="text-decoration-none mention">@trevordaniels</a> Yes you will want to use proximity sensors to measure the blade up and down and get the measurements in MyGeotab. You will want to have the Geotab <a href="https://support.geotab.com/ioxs/doc/iox-auxm" target="_blank">IOX-AUXM</a> as well. To answer your questions directly you will be able to see the blade positions speeds and lots of other real time data. If there is anything else you are curious about let us know and we can give you more details about it.

Geotab install for Caterpillar Graders

Hi <a data-id="1044" data-value="EishiFUN" data-denotation-char="@" href="/user/eishifun" class="text-decoration-none mention">@EishiFUN</a> Thanks for your help

iox nfc value 3

<a data-id="1044" data-value="EishiFUN" data-denotation-char="@" href="/user/eishifun" class="text-decoration-none mention">@EishiFUN</a> Thank you very much, I will be escalating it

update the firmware on an iox GO talk

<a data-id="1351" data-value="Cristian.hdz.Prime24" data-denotation-char="@" href="/user/cristian.hdz.prime24" class="text-decoration-none mention">@Cristian.hdz.Prime24</a> I dont know of a way but maybe <a data-id="8241" data-value="Tony_M" data-denotation-char="@" href="/user/tony_m" class="text-decoration-none mention">@Tony_M</a> does

How is the date that an iox was installed determined?

Hello, Based on my technical experience, this very common error appears when the physical connection of the IOX is not adequate.

ERROR CODE IOX

Newer IOX-BT (GXSBT1) does not pick up IOX-BT beacon packets that older versions of IOX-BT pick up. With older versions of IOX-BT we are seeing the custom data. With GXSBT1 we are not seeing any custom data.  We are following the Add-On Protocol - BLE Advertisement https://developers.geotab.com/hardware/protocolReference/ble/index.html

New IOX-BT (GXSBT1) does not pick up IOX-BT beacon packets.

Has anyone else experienced this issue with their IOX-NFC readers where the reader is going online and offline hundreds of times per day. This looks like a recent issue and it causes the driver reminders to constantly go off and the NFC fobs do not work. Below is the NFC device connected measurement over the last 2 days. 

Geotab NFC going offline and online hundreds of times

I am currently trying to configure my spreader integration. After installing my IOX-works cable, I have set my spreader controller type within the public works menu . I am, however having an issue figuring out how to display treatment progress on the map in the same way that I would track exceptions when using the IOX-AUX cable. While I can verify measurements within the public Works menu, I do not see any options to track the status of whether or not the spreader is on or off.

How to display treatment progress with IOX-WRKS spreader integration

I have blank NFC cards I would like to use for geotab along with employee ID cards. I'm not sure how to write the driver ID to the card. Does anyone have any examples. I have the NFC reader installed and the following added under the vehicles for custom parameters  &lt;Parameter Description='NFC use Generic Card Serial Number' Offset='179' Bytes='01' IsEnabled='true'/&gt;