Ga naar hoofdinhoud
CColl-10366
Oorspronkelijke plaatser

i have a 1989 GMC 700 and im trying to get a geo device hooked up. i know there are not computers in this truck but if i know the pin out of the geo device then i can get power to the device for the tacking and mapping i just wont have any diagnostics of the unit. does any one have the pin out of a geo devoce.

Deelnemen aan het gesprek

Je moet ingelogd zijn om op dit bericht te reageren en deel te nemen aan de discussies in de Geotab Community.

Populaire antwoorden

EishiFUN
Community-beheerder

Hello @CColl-10366​ ,

 

Thank you for asking your question in our community. For this kind of vehicle we have a special harness you can use to install the device. It is our HRN-CW03K3 .

 

You can read a little more about this harness and the installation of it in this article: 3-Wire Harness Installation and Functionality with Geotab GO Devices

 

Let us know if you have any other questions bout this. We are happy to help.

 

have a great day!

Eishi FUN

1 antwoord

EishiFUN
Community-beheerder

Hello @CColl-10366​ ,

 

Thank you for asking your question in our community. For this kind of vehicle we have a special harness you can use to install the device. It is our HRN-CW03K3 .

 

You can read a little more about this harness and the installation of it in this article: 3-Wire Harness Installation and Functionality with Geotab GO Devices

 

Let us know if you have any other questions bout this. We are happy to help.

 

have a great day!

Eishi FUN

Heeft u nog vragen?