Ga naar hoofdinhoud

Which harness should I use with an FL360 2024 unit?

OscarS-1828
Oorspronkelijke plaatser

I have a 24Y1 harness installed, but it's detecting the ignition with only two wires.

 

This is affecting the unit's ignition detection.

 

Do you have any recommendations for a specific harness?

Deelnemen aan het gesprek

Je moet ingelogd zijn om op dit bericht te reageren en deel te nemen aan de discussies in de Geotab Community.

Populaire antwoorden

EishiFUN
Community-beheerder

Hey @OscarS-1828​ ,

 

Thank you for asking your question in our community. Do you know what kind of ports the vehicle has? It should have a 9 pin port at least and use the HRN-GS09K2-A. Or a better better option is to use the rp1226 port with the harness HRN-CS14T2 (RP1226). If it has that port on it which it likely does.

 

Let us know if you have any other questions about this. We are here to help.

 

Have a good one!

Eishi FUN

1 antwoord

EishiFUN
Community-beheerder

Hey @OscarS-1828​ ,

 

Thank you for asking your question in our community. Do you know what kind of ports the vehicle has? It should have a 9 pin port at least and use the HRN-GS09K2-A. Or a better better option is to use the rp1226 port with the harness HRN-CS14T2 (RP1226). If it has that port on it which it likely does.

 

Let us know if you have any other questions about this. We are here to help.

 

Have a good one!

Eishi FUN

Heeft u nog vragen?