If an asset is stopped (ignition off) but not isolated on the battery/power, what data will it still be recording? Could it possibly be giving an idling read due to the isolator being off & falsely thinking that the ignition is actually on? Go9/harness device direct to OMB.
You need to be logged in to reply to this post and participate in the Geotab Community discussions.
@BPennAU It depends on how the device is installed but usually if it's installed via OBD then the device is looking for an RPM value from the truck. If the RPM is 0 then it'll register as ignition off and the device will go to sleep. If the RPM is higher than 0 then it'll register as ignition on and start tracking idling hours.
@BPennAU It depends on how the device is installed but usually if it's installed via OBD then the device is looking for an RPM value from the truck. If the RPM is 0 then it'll register as ignition off and the device will go to sleep. If the RPM is higher than 0 then it'll register as ignition on and start tracking idling hours.