 Is it best to report the measurements to the measurement section under engine info, is that possible? Or perhaps a better place to write that data to for reporting purposes?

Where can an integrator for load weights write the weights automatically to through the API?  Is it best to the measurements under engine info, is that possible?

page-user page-user-susan-johnson-1052 template-account-profile page-status-200 theme-harmony user-guest

Company

Title

<a href="/user/jake-jorns-8255" data-id="8255" data-value="jjake-8255" data-denotation-char="@" class="text-decoration-none mention">@jjake-8255</a>​  and <a href="/user/genevieve-bouchard-1051" data-id="1051" data-value="Genevieve-1051" data-denotation-char="@" class="text-decoration-none mention">@Genevieve-1051</a>​  I actually asked them to put up a ticket here as well to see if anyone else may use the ARCGIS connector and have some insight. i have a ticket open already. DO either of you have experience with the ARGIS connector? Or know who may have? Thanks ladies. <a href="/user/api-access-7583" data-id="7583" data-value="AAcce-7583" data-denotation-char="@" class="text-decoration-none mention">@AAcce-7583</a>​  still hoping some one here can give added Feedback.

GeoEvent MyGeotab Authentication Failure

<a href="/user/joseph-yalenkatian-1062" data-id="1062" data-value="Joseph-1062" data-denotation-char="@" class="text-decoration-none mention">@Joseph-1062</a>​ thanks for that was it in yards earlier because it can be shown in yards in the UI.

What units are the odometer readings in when using the MyGeotab Python package?

<a href="/user/ben-mcneill-1334" data-id="1334" data-value="BMcNe-1334" data-denotation-char="@" class="text-decoration-none mention">@BMcNe-1334</a>​ It is generally in Yards, we have built in a converter in our feed after the fact 1 mile = 1760 yrds.

Hello <a href="/user/sonny-okrasinski-1323" data-id="1323" data-value="SOkra-1323" data-denotation-char="@" class="text-decoration-none mention">@SOkra-1323</a>​  it can easily be removed by unplugging it. If it is installed with a harness please view this installation video and complete the process in reverse.  https://www.youtube.com/watch?v=f6nGuI_ItWQ

How do I remove the Geotab GPS GO Device from my new truck?

<a href="/user/david-fleming-1313" data-id="1313" data-value="DFlem-1313" data-denotation-char="@" class="text-decoration-none mention">@DFlem-1313</a>​ have you check the https://myadmin.geotab.com/sdk#/api-reference Myadmin SDK reference

Complete list of all Devices within the MyAdmin database that is assigned to an Account using the Geotab SDK

Speed rules by zones of increasing speed increments to warn drivers about speed in MyGeotab

<a href="/user/cathy-morel-1302" data-id="1302" data-value="CMORE-1302" data-denotation-char="@" class="text-decoration-none mention">@CMORE-1302</a>​ you can set up different rules to beep, but to note the beeping on a rule, rather than on the device driver feedback, will be delayed in causing the unit to beep. The info would have to come into the servers first then process against the rule to send the driver notification (beeping) as set up in the notification section of the rule itself. Between inbound, processing and relay back it could be a minute or two after the actual event, since the rules doesn't "reside" on the device like the driver feedback.

<a href="/user/lp-papillon-1145" data-id="1145" data-value="LPPapillon-1145" data-denotation-char="@" class="text-decoration-none mention">@LPPapillon-1145</a>​ thanks for the prompt and great feedback, appreciate it and you!

<a href="/user/lp-papillon-1145" data-id="1145" data-value="LPPapillon-1145" data-denotation-char="@" class="text-decoration-none mention">@LPPapillon-1145</a>​  They are cloud-based, so unless they create their own add in it is not possible? Anywhere in the DVIR or mobile app that can be captured outside of manually on the DVIR list? Can they write to that, say after DVIR is complete or even prior to the driver certifying? Do you perhaps know if LoadMaxx is doing it via your first part of the answer, the client checked out LoadMaxx and they were quite pricey, as they really don't need load weight consistently or shown to the driver just at departure from their depot to their stores.

Is it best to report the measurements to the measurement section under engine info, is that possible? Or perhaps a better place to write that data to for reporting purposes?

최근 활동

Where can an integrator for load weights write the weights automatically to through the API? Is it best to the measurements under engine info, is that possible?