Hi <a data-id="1741" data-value="OHurs-1741" data-denotation-char="@" href="/user/ohurs-1741" class="text-decoration-none mention">@OHurs-1741</a> Is the customer sometimes doing the A &amp; B at the same time requiring the next B to be done 60k after the A? if so just tell the system that you did a B when you did the A and it will count the next B 60k from the A service. or if it needs to be 60K after each A, can you not make the B interval 100k?

A/B Services

Hi All, One of our clients is keen on reporting on when there asset battery is running low. We really want something that will replicate the low battery set up on the asset list inside Geotab. But instead of relying on us to manually check the list every few hours, every time something pops up on that list we want an email. Eg, if a vehicle is parked on the side of the road at a job site with the flashing lights going, the battery is going to drain over that period. We want to be notified that that is happening so we can contact the person operating the vehicle and ask them to start it up before it actually goes flat, therefore preventing the need to jump start and the inconvenience of having a vehicle that won't start.The cranking voltage is only referencing the voltage when the engine starts, meaning we don't get the proactive notification before a vehicle is flat, just an alert that the engine is turning over and it's already too late. Any ideas on the best way to report this? Kind Regards,Owen

Battery Drain - Reporting on low battery inside asset list

<a data-id="1044" data-value="EishiFUN" data-denotation-char="@" href="/user/eishifun" class="text-decoration-none mention">@EishiFUN</a> Thank you for your reply. It is odd this isnt a feature yet given the large number of truck logistics fleet with Geotab. I will submit something in the feedback hub but for now i will create a custom add-in as the end client found the recommened work around to be too techincal

page-user page-user-owen-hurst-1741 template-account-profile page-status-200 theme-harmony user-guest

Company

Title

Hi Team, what is the best way of setting up an A&#x2F;B service for a vehicle. The (a) service is every 40,000km and the (b) service is every 60,000km. We need the b serivce to trigger 60.00 km on top of the A service reading. but they are set up in the system as 2 services that run independently. Any ideas?

Hi All, One of our clients is keen on reporting on when there asset battery is running low. We really want something that will replicate the low battery set up on the asset list inside Geotab. But instead of relying on us to manually check the list every few hours, every time something pops up on that list we want an email. Eg, if a vehicle is parked on the side of the road at a job site with the flashing lights going, the battery is going to drain over that period. We want to be notified that that is happening so we can contact the person operating the vehicle and ask them to start it up before it actually goes flat, therefore preventing the need to jump start and the inconvenience of having a vehicle that won't start.The cranking voltage is only referencing the voltage when the engine starts, meaning we don't get the proactive notification before a vehicle is flat, just an alert that the engine is turning over and it's already too late. Any ideas on the best way to report this? Kind Regards,Owen

最近の活動

A/B Services

Battery Drain - Reporting on low battery inside asset list