Hi team,
I see that the preset rules for Go Focus have preset thresholds for each vehicle class.
Is there a format that specifies which g-forces are taken into account depending on whether it's a vehicle or a tractor?
I understand that the G-forces are generated by the equipment
You need to be logged in to reply to this post and participate in the Geotab Community discussions.
For G-force rules in MyGeotab, the system uses default settings based on the vehicle class. For heavy vehicles or tractors, the recommendations are as follows:
•
Default setting: The standard option is Truck/Van.
•
Recommended threshold: For events like 'Near Collision' in GO Focus Plus, the suggested threshold is usually -0.46g (Medium sensitivity), though this can be adjusted.
•
Calibration: The system can auto-calibrate using the VIN and the vehicle's Gross Vehicle Weight. Make sure these fields are correctly filled in the asset setup.
To adjust these values, go to Rules, find the specific rule (like Hard Braking), and use the slider to change the sensitivity.
@Cristian.hdz.Prime24 Thank u Cris