Passer au contenu principal

What is the meaning of the engine fault "Telematics device fault: Disabled due to production test firmware"?

NaomiC
Affiche originale

Could you help me to know what the following error means "Telematics device fault: Disabled due to production test firmware"?

 

And what are the troubleshooting steps?

 

Telematics device fault

Joindre la conversation

Vous devez être connecté pour répondre à ce message et participer aux discussions de la communauté Geotab.

Meilleures réponses

EishiFUN
Administrateur de communauté

Hello @NaomiC​ ,

 

Thank you for asking your question in our community. This fault is very normal on new devices. The production firmware, X.0.X will cause this to be reported. This does not affect communication for new devices. We shouldn't need to manually update the firmware either when we see this log on new devices, there is already a firmware update pending which will resolve this.

 

If you have any other question or concerns with this please reach out.

 

Have a good one!

Eishi FUN

4 Réponses

EishiFUN
Administrateur de communauté

Hello @NaomiC​ ,

 

Thank you for asking your question in our community. This fault is very normal on new devices. The production firmware, X.0.X will cause this to be reported. This does not affect communication for new devices. We shouldn't need to manually update the firmware either when we see this log on new devices, there is already a firmware update pending which will resolve this.

 

If you have any other question or concerns with this please reach out.

 

Have a good one!

Eishi FUN

Hello @EishiFUN​ 

 

I'm having the same problem, but the box has been in this state for 72 hours and won't retrieve the update. In addition, the box beeps every 60 seconds and flashes red. Do you have a solution?

 

Have nice day

@Théo Bape​ You're going to want to raise a case with Geotab Support for this issue. There's a known issue with certain firmwares that prevent them from doing their initial update and Geotab needs to do something on the back end to get them to do the firmware update.

NaomiC
Affiche originale

@EishiFUN​ Thanks for your prompt assistance! 😁

Avez-vous toujours des questions?