I have a construction company that has contractors working on and off every month, an example, they work 2 days for my client and then they do another job for another client 1 day and then back for my client. The goal is to record only the data they work and for them to be able to turn off data capturing when they are not working for the client. How can we some how turn off and on in MyGeotab and then a report is generated for the work hours they only did for the company, we want to make this as automated as possible.

Turning go device data capture on and off.

I need to setup a more reliable collision report that isnt giving false alarms for soft collision detection. How do i setup a report or notification weekly or on a collision basis that only informs major collisions or similar, they get reports for 50 

I need to setup a more reliable collision report for only major collision

I have a company transferring goods and if specific situation arises they need to access instruction on how to handle the goods and they would like to keep it in geotab Drive. Either pdf or just text wise? Is that possible?

Is it possible to keep files/special instructions in Geotab drive app?

We have a Caddy connected to GO9 and it seems it is sometimes losing GPS and when looking at fault codes i can see these three messages: Telematics device fault: Collision data is unavailable for 10 minutes due to excessive logging of Collision events. If this fault occurs three consecutive times then the GO device disables logging any suspected Collisions until the device is reset. During the night the GPS signal was off for two hours between 03:00 - 05:00 and these are the faults that came later. Could there be a connection to gps? 

Fault message that may relate to bad GPS

Wha does fault code "Alert: Collision limit for acceleration exceeded" mean?

I have a client that is requesting a report every time a vehicle has driven 1000 km. How can i setup automatic reports or emails that inform him that this vehicle just drove 1000 km from the last report. Lets say it is in 45.000 km today in MyGeotab and starting now i want to be notified when it is up to 46.000, 47.000 and so on.  The reason for this is to monitor the usage and dynamically manage the usage of the vehicles, so they have an even mileage on the fleet in the long run and not one vehicle that has went beoynd the maximum mileage before substituting it. Any ideas? 

How to report every time a vehicle has driven 1000 km in MyGeotab

I want to upgrade the subscription to Pro API plan instead of a Pro plan since my clients are not using MyGeotab. How is that done ?

How to assign 3 employees/drivers in 1 vehicle each morning (variations which employee is in which car)

page-user page-user-arnar-jonsson-1532 template-account-profile page-status-200 theme-harmony user-guest

Company

Title

Thanks alot <a href="/user/eishifun" data-id="1044" data-value="EishiFUN" data-denotation-char="@" class="text-decoration-none mention">@EishiFUN</a>​

<ol><li>I found this in the article, that should clear my previous question, "Reports do not include data from vehicles when in Personal Mode, which may lead to anomalous results"</li></ol>

Thats exactly what were looking for. Thanks. One more question, lets say we go for geotab drive personal mode, the driver during the month sets personal mode on and off, does that mean that the data for the month is only generated from the non-personal data capturing?

I have a construction company that has contractors working on and off every month, an example, they work 2 days for my client and then they do another job for another client 1 day and then back for my client. The goal is to record only the data they work and for them to be able to turn off data capturing when they are not working for the client. How can we some how turn off and on in MyGeotab and then a report is generated for the work hours they only did for the company, we want to make this as automated as possible.

I need to setup a more reliable collision report that isnt giving false alarms for soft collision detection. How do i setup a report or notification weekly or on a collision basis that only informs major collisions or similar, they get reports for 50

Thanks alot <a href="/user/dane-hollar-7302" data-id="7302" data-value="dhollar-7302" data-denotation-char="@" class="text-decoration-none mention">@dhollar-7302</a>​ for the info, i will take a look at this.

I have a company transferring goods and if specific situation arises they need to access instruction on how to handle the goods and they would like to keep it in geotab Drive. Either pdf or just text wise? Is that possible?

We have a Caddy connected to GO9 and it seems it is sometimes losing GPS and when looking at fault codes i can see these three messages: Telematics device fault: Collision data is unavailable for 10 minutes due to excessive logging of Collision events. If this fault occurs three consecutive times then the GO device disables logging any suspected Collisions until the device is reset. During the night the GPS signal was off for two hours between 03:00 - 05:00 and these are the faults that came later. Could there be a connection to gps? <img src="/forum/plugins/gcs-uploads/files/069Pd00000LD8bbIAD.png" alt="Screenshot 2025-02-25 at 09.18.28" />

Thanks alot <a href="/user/ssartor" data-id="1546" data-value="ssartor" data-denotation-char="@" class="text-decoration-none mention">@ssartor</a>​ and <a href="/user/tony-mcgeough-1053" data-id="1053" data-value="TonyFC-1053" data-denotation-char="@" class="text-decoration-none mention">@TonyFC-1053</a>​  for your help. We deployed this method and email notification. Thanks!

Viimane tegevus

Turning go device data capture on and off.

I need to setup a more reliable collision report for only major collision

Is it possible to keep files/special instructions in Geotab drive app?