<a data-id="1546" data-value="ssartor" data-denotation-char="@" href="/user/ssartor" class="text-decoration-none mention">@ssartor</a> I am unsure of the hardware used to install and I would assume this through the ECM or BCM cable of the bus. I only have parameters to view and pull reports.

Bus Stops report

Hi <a data-id="3712" data-value="CElvi-3712" data-denotation-char="@" href="/user/celvi-3712" class="text-decoration-none mention">@CElvi-3712</a> , great questions — happy to help point you in the right direction before you request access! How many stops can be programmed for a planned route? From what I have found I havent been able to confirm a hard limit. I assume there has to be some limit even if it is something crazy like 1000. I dont think it is something you need to worry about but I can look more into it if you are running into limit issues. What does the report look like? There are two built-in reports for planned routes: 1. Planned vs. Actual Route Report — compares your planned route against what the driver actually did, showing missed stops, early&#x2F;late arrivals, and any unplanned stops. You can view it directly in MyGeotab, download it, or see a map overlay of planned vs. actual. 2. Unmatched Route Report — shows driving that fell outside any planned route. Resources to help you get a feel for the feature before requesting access: - Planned routes — setup and overview with screenshots (https:&#x2F;&#x2F;support.geotab.com&#x2F;help&#x2F;mygeotab&#x2F;fleet-activity&#x2F;routes&#x2F;planned-routes) - Route reports — what they show and how to access them (https:&#x2F;&#x2F;support.geotab.com&#x2F;help&#x2F;mygeotab&#x2F;reports&#x2F;productivity-reports&#x2F;route-reports) - Geotab Academy — Routes (https:&#x2F;&#x2F;support.geotab.com&#x2F;geotab-academy&#x2F;all-resources?searchTerm=routes) — videos and walkthroughs showing the feature in action in MyGeotab Feel free to reach out if you have any other questions — we are here to help. Have a great day! Eishi FUN

Planned Route Reports

page-user page-user-cynthia-elvin-3712 template-account-profile page-status-200 theme-harmony user-guest

Company

Title

so I would like to see if I can create a monthly report for a fleet of buses that would provide the bus stops made and times and then also time of arrival at schools and yards. the caveat is that many of the buses pass through another buses bus stop without it being on their roster. I don't want that to trigger unnecessarily but also some of the buses share the same bus stop but for different schools so I am guessing that I would need to just pull a red light report showing when they activated their red lights. however, I need miles traveled between yard - first stop - last stop - school and vice&#x2F;versa for the return. I thought a planned route report would be a better option but am still researching.

If I were using Geo Tab to create a bus stop report for individual buses, would the report trigger a &quot;bus stop&quot; for every vehicle in the fleet passing through the created zone or just those that make an actual bus stop indicated by the red light trigger?

How many stops can be programmed for a planned route? What does the report look like for a planned route? I am only a user on our geotab, I will need to request the parameter for planned route if the idea I have can be implemented by using planned route, so I cannot see what I am looking for right now

Actividad reciente

Bus Stops report

Planned Route Reports