Saltar al contenido principal

Feedback: Video event map

JesseA-6619
Póster original

Some feedback for the videos that show up for Road Adjustment Suggested. When you select the video to look closer, the map at the bottom does not show the actual location (only displays 0,0). It would be ideal to have consistency across all recorded events. Imagen subida por el usuario 1

Unirse a la conversación

Necesita conectarse para responder esta publicación y participar en los debates de la Community de Geotab.

Respuestas principales

@JesseA-6619 - that sounds like a good amount. I think it may be a camera issue, I'd call your reseller and ask them to open a trouble ticket.

9 Respuestas

What camera is it? Is the GO device currently reporting?

JesseA-6619
Póster original

@sjohnson-nynjflnv GO Focus Plus, and yes!

@JesseA-6619 That is interesting as 0,0 is usually the lat long when there is no GPS latch from the device. Can you check in Engine and Measurements, under this device (GO), measurements, see how many satellites it is latching to.

JesseA-6619
Póster original

@sjohnson-nynjflnv It's latched onto up to 20 satellites today, and at the time of this trip the number was about 10.

@JesseA-6619 - that sounds like a good amount. I think it may be a camera issue, I'd call your reseller and ask them to open a trouble ticket.

This Could Possibly be an interface bug, or software has detected a discrepancy between the map's recorded speed limit or road geometry and actual driving behaviors. I would reach out to your installer or Geotab directly. I will look into this more, I included a photo of what my data base looks like. You can also possibly try to move the camera/ recalibrate it.Imagen subida por el usuario 1

@DakotaDagostino GFP is supposed to self calibrate and location at 0,0 is a satellite latch issue.

Can you get data on the physical behavior of the Gofocus camera? I mean the behavior of the LED.

Hi Jesse, is there any unusual behavior with the LED on the GO Focus?

¿Todavía tienes dudas?