<a data-id="1044" data-value="EishiFUN" data-denotation-char="@" href="/user/eishifun" class="text-decoration-none mention">@EishiFUN</a> Thanks a lot for the information

how a driver is associated with a trip through gofocus

Hi thanks for your comments. The issue we have is that when we installed a camera, it already appeared associated, so since we have several databases, we would look for it in myadmin and disassociate it.

Is there any way to identify the GoFocus cameras already installed?

<a data-id="1351" data-value="CristianHernndez-1351" data-denotation-char="@" href="/user/cristianhernndez-1351" class="text-decoration-none mention">@CristianHernndez-1351</a> I just tested this on my test database and bulk editing the speed limit warning worked on all of them, both turning it on and off.

turn off the speed limit proximity beeps

Hey <a data-id="1351" data-value="CristianHernndez-1351" data-denotation-char="@" href="/user/cristianhernndez-1351" class="text-decoration-none mention">@CristianHernndez-1351</a>, Here's the Quick Start Guide &amp; Support doc that might help. https:&#x2F;&#x2F;docs.google.com&#x2F;document&#x2F;d&#x2F;1W7N59YsG2WHRSpIml4yR4g0OR5Y4KP8IopptfWBsjBY&#x2F;edit?tab=t.0#heading=h.v6im158tkzh https:&#x2F;&#x2F;docs.google.com&#x2F;document&#x2F;d&#x2F;1-Ph0K3vgmKKbljfVWNfoNRejjfydsa9uw6dZpA4A0jM&#x2F;edit?tab=t.0#heading=h.z3ivftyjjrfi

GO Anywhere Plus

Hello <a data-id="1351" data-value="CristianHernndez-1351" data-denotation-char="@" href="/user/cristianhernndez-1351" class="text-decoration-none mention">@CristianHernndez-1351</a> , Thank you for asking your question in our community. Today the wake up is based on accelerometer movement which is 0.05G detected by the accelerometer. Once this threshold is met it will wake up and start recording. There is a sentry mode that is set to deploy at some point to wake up the camera when movement is detected such as a person walking up to the vehicle but this is not currently available. I know it is being worked on but that is about all I know I can share at this time. Let us know if you have any other questions. Always happy to help! Have a good one! Eishi FUN

parameter for the GoFocus to start streaming video

<a data-id="1044" data-value="EishiFUN" data-denotation-char="@" href="/user/eishifun" class="text-decoration-none mention">@EishiFUN</a> Thank you very much, I already found the report

Maintenance message report

<a data-id="1044" data-value="EishiFUN" data-denotation-char="@" href="/user/eishifun" class="text-decoration-none mention">@EishiFUN</a> Thanks, I'll be following the steps.

There are communication status reports for Gofocus cameras.

<a data-id="1351" data-value="CristianHernndez-1351" data-denotation-char="@" href="/user/cristianhernndez-1351" class="text-decoration-none mention">@CristianHernndez-1351</a> If you're talking about the colour picker, you need to adjust the slider on the far right, if it's at the bottom it'll always be black and if it's at the top it'll always be white. <img class="ql-image" src="/forum/plugins/gcs-uploads/files/1784851552257-2026-07-24-09_34_01-bulk-edit-tool-_-mygeotab-original-profile-mozilla-firefox.png"/>

Bulk editing

 Hello, I've noticed that on newly installed devices, when checking their communication in MyAdmin, no GPS communication is shown, even though a coordinate record exists in the database. I want to know if there's a point in time when this data disappears from MyAdmin, as I generate queries based on it.

Is there an estimated time frame after which GPS data will no longer be reflected in MyAdmin?

 Hello, I have a GO device on a Pro Live plan. Can you help me by providing the warranty periods for the different plans?

What is the warranty period for a GO device that is on a Pro Mode: Live plan?

Hi I think the easiest way is to create a group and link units and the rule you want to apply, it's not necessary to create two groups

Rule apply to all vehicles except 1 group

Hi I followed the steps that <a data-id="1044" data-value="EishiFUN" data-denotation-char="@" href="/user/eishifun" class="text-decoration-none mention">@EishiFUN</a> recommended and it did work for me, I can see the information from different groups

User Data Access & Access to view assets on the map

<pre data-language="plain">Hello. Given the number of cameras installed at our clients' sites, we are looking for a way to check their communication status via a report. Could you let me know if such a report exists?</pre>

Hi, I have tried to look for Gofocus cameras in MyAdmin to identify if they are already associated with a device. Is there any way to identify it?

Hi, I have detected a trip associated with the wrong driver. When reviewing the audit log, I noticed that Geotab Video assigns the driver to the trip but the name is wrong. How can I mitigate this type of error?

Hi I also tried to do something similar. The possible solution they gave me at the time was the maintenance report since we depend on the data of the type of oil used.

Oil Life Monitoring Report

Hi To find out which company the SIM associated with the device is linked to, you can check it with the SIM product code that appears in myadmin.

MyAdmin | Assigned SIM card

How can I turn off the speed limit proximity beeps of the assets since I have to do this for 400 units

Hi, if it's the warning beeps when you approach the speed limit threshold, try modifying them as <a data-id="1044" data-value="EishiFUN" data-denotation-char="@" href="/user/eishifun" class="text-decoration-none mention">@EishiFUN</a> indicates, but the changes aren't saved.

page-user page-user-cristianhernndez-1351 template-account-profile page-status-200 theme-harmony user-guest

Company

Title

["Integrators Group"]

A broadcast-only group for receiving Geotab integrations news and updates!

Integrators Group

Yes, it's possible. To achieve this, you need to create a custom rule in MyGeotab that links your vehicle to that specific zone. Follow these steps to set it up: 1. Go to Rules &amp; Groups &gt; Rules. 2. Click Add to create a custom rule. 3. In the Conditions tab, select Add Zone or Zone Type. 4. Set the condition to trigger when the vehicle is Outside its &quot;Home&quot; zone. 5. To link it to a specific asset, make sure both the vehicle and the rule belong to the same Group. Once the rule is created, you'll be able to generate an Exceptions report that will show you exactly when and for how long the vehicle was outside its assigned zone.

Can I link a specific asset with a specific zone so I can create a report telling me when that vehicle is not in its "Home" zone?

The main differences lie in the source and purpose of the data: • Last GPS record: Uses satellites to get exact coordinates. The latitude and longitude values are considered. • Last engine record: Comes from the vehicle's ECM. Values like the odometer or engine hours are considered. • Last communication: It's a record from the Geotab system. It indicates the last time the device had cellular coverage to transmit.

MyAdmin | Difference in the last communication data

Hi Here's the difference between these three pieces of data in MyGeotab: • Last GPS record: It's the date and time of the most recent geographic position captured by the device. • Last engine record: It shows when the last data was received directly from the vehicle's computer (like the odometer). • Last communication: It's the exact moment the device last connected to the Geotab servers to send information.

Hi of course you can create a custom rule. 1. Go to Rules and Groups &gt; Rules. 2. Click Add. 3. In the Name tab, give the rule a name. 4. Go to the Conditions tab and select Add speed limit. 5. Select Exceeded limit and enter 10 km&#x2F;h. 6. Click Add duration and select Greater than 10 seconds. 7. Click Save.

Recent Activity

how a driver is associated with a trip through gofocus

Is there any way to identify the GoFocus cameras already installed?

turn off the speed limit proximity beeps