Hello,I have a question about how EV SOC (State of Charge) data is reported by the GO device.As I understand it, SOC data is typically recorded and sent when the value changes (for example, when SOC changes by about 1%).I am concerned about the following scenario:The device temporarily loses cellular connectivity.During this offline period, the SOC changes (for example due to driving or charging).However, the device cannot send the data because there is no connectivity.Later, the cellular connection is restored.In this situation, will the GO device send the SOC changes that occurred during the offline period once the connection is restored?Also, if the SOC happens to return to the same value as before the connectivity loss (for example, charging and then driving back to the same percentage), is it possible that no new SOC record will be sent?In that case, it seems that MyGeotab might continue to show the old SOC value from before the connectivity loss, even though the actual SOC may have changed during that time.Could you please clarify how SOC reporting works in this situation?Thank you very much.

MyGeotab EV SOC reporting behavior after temporary connectivity loss

How do I measure the current charge of an electric vehicle?

I would like to email a list of recipient a daily EV report showing real time EV charging status (is charging or not) and what's the % of charge at the time when the report was generated.  Thank you.

Is there a way to generate a MyGeotab report showing real time EV charging status

Will battery degradation likely be lower if, like me, you charge exclusively from home via a 2.3kw 10 amp max charger, IE due to lower stresses to battery?

Geotab has launched a new resource for fleets to support you at each step of your fleet electrification journey and save you time in the process. Combining resources, tools, and fleet success stories - from transitioning to EVs through operating them - Geotab's Fleet Electrification Knowledge Center provides you with access to critical knowledge so you can design your EV roadmap at your own pace. Visit your single resource for fleet electrification insights today! If you have any questions, please leave them in the Electric Vehicles (EVs) corner of the Community!

Newly Launched: Fleet Electrification Knowledge Center

Have you ever been decoding from BYD Electrical vehicle before?Hello. I am a distributor of Electric car (BYD Brand). I would like to be partner with IoT for EV. I would to know about your company more.Have you ever been decoding from BYD Electrical vehicle before? (For each EV type : Froklift, Passenger car, Bus, Truck and Van) and Do you have EV platform for Fleet management ? Thank you

Has Geotab been decoded for BYD electrical vehicles?

Learn more about electric vehicles, electric Infrastructure and how to properly manage EV charging loads on Connected with Geotab. Listen to the podcast here: www.geotab.com/podcast.

MyGeotab EV SOC reporting behavior after temporary connectivity loss

How do I measure the current charge of an electric vehicle?

Is there a way to generate a MyGeotab report showing real time EV charging status

Will battery degradation likely be lower if, like me, you charge exclusively from home via a 2.3kw 10 amp max charger, IE due to lower stresses to battery?

Newly Launched: Fleet Electrification Knowledge Center

Has Geotab been decoded for BYD electrical vehicles?

Connected with Geotab Podcast