0 mins to read•
0 mins to read•
Learn more about GO TALK, which provides real-time feedback to drivers about their road safety and performance. With the GO TALK, fleet managers can add tools for improving long-term driving skills and notify drivers when they exceed allowable conditions. This real-time feedback pushes drivers to continuously improve their skills through a digital coach instead of simple alerts.
The GO TALK provides real-time feedback to drivers about their road safety and performance. With the GO TALK, the fleet manager adds a tool for improving long-term driving skills and notifies the driver when they exceed allowable conditions.
The GO TALK aims to improve bad driving habits while forming good ones, without overbearing intervention. The real-time feedback pushes drivers to continuously improve their skills through a digital coach instead of simple alerts.
Overall Length: 2400 mm L
Widest Point: 58 mm W × 23 mm H
Black, PC+ABS, injection moulding grade
CAN: 500 kbps (for daisy chaining)
67 dBA - 83 dBA at 1 m for volume range 1-6
Nominal Input Voltage
12 V / 24 V
Daisy Chaining: 2500 mA @ 12 V / 24 V
Operating Mode: 17 mA
Speaking Mode: 178 mA
Sleep Mode: 0.09 mA
−40 ℃ to +85 ℃
Male Mini-USB Type-B connector: Daisy chain power and CAN in
Female Mini-USB Type-B connector: Daisy chain power and CAN out
Male Mini-USB connector connects to the GO device or another IOX
All GO7® and newer devices and variants
WARNING! Prior to IOX-GOTALK installation, read and follow GO device installation instructions (goo.gl/rkLRiA) to both verify any existing GO device installation is correct and that you are qualified to complete this IOX-GOTALK installation. Incorrect installation of either the GO device, and/or IOX-GOTALK can result in loss of vehicle control and serious injury.
WARNING! Prior to IOX-GOTALK installation, read and follow Important Safety Information and Limitations of Use, located at the end of the document. Always read and follow all safety information to prevent loss of vehicle control and serious injury.
Unplug the Geotab GO device from the vehicle and remove the IOX expansion port cover on your GO device.
Plug the 90° USB connector from the IOX into the GO device. Secure the USB connector using a cable tie. Please note that over tightening may damage the USB connector.
✱ NOTE: Insert the USB connector in the orientation displayed in the image.
Choose an appropriate location to install the IOX-GOTALK mount. Please ensure the installation does not interfere with safe vehicle operation. The mount can be attached with two screws to the location of your choice.
Proper placement of the IOX-GOTALK is crucial and affects the driver’s ability to hear the alerts under harsh, loud conditions, such as driving at high speed with windows down.
✱ NOTE: The location you choose for the GO device influences the location available to mount the accessory due to the wire length of IOX-GOTALK. Please ensure the installation does not interfere with safe vehicle operation.
Once you connect the IOX-GOTALK to the GO device, plug in the GO device and immediately start the vehicle. The IOX will enter self-learn mode and the GO device will enter debug mode.
Navigate to myinstallpub.geotab.com to verify that the device is communicating.
✱ NOTE: If the device is not communicating, please ensure the device is installed correctly and try again.
The IOX comes with a termination shunt installed in the expansion port. If you plan to install more than one IOX in a daisy chain, you must remove the shunt from each device in the line with the exception of the last IOX connected. The shunt must remain in the last IOX and secured with a cable tie.
The shunt in the last IOX ensures the GO device detects and configures the IOX, as effectively as possible.
✱ NOTE: Failure to install the shunt in the last IOX may affect IOX communication. To ensure the IOX communicates properly, please secure the shunt with a cable tie.
The IOX-GOTALK uses two types of rules: device-based rules and server-based rules. Device-based rules, built into the device, do not need to communicate with MyGeotab™ when a rule is broken — the device instantly processes the rules. However, server-based rules need to communicate with MyGeotab, and may take some time, depending on network conditions.
Device-based rules cover basic use cases: vehicle speeding, idling, seat belt use, reversing, and dangerous driving. The user can individually enable, disable, and adjust the rules to suit user preferences. Configure device-based rules on the Vehicle Edit page under the Driver Feedback tab.
By default, the GO Device produces beeps in response to device-based rules. With an IOX-GOTALK installed, beeping from the device is replaced with spoken phrases. Each device-based rule uses a predefined spoken phrase.
Device-based rules vary depending on your subscription plan. A list of all device-based rules and their associated GO TALK phrases are provided in the list below.
Driver identification reminder
Unknown Driver (repeated)
Beep when idling for a period of time
Idling for too long (repeated)
Speeding violation (repeated)
Beep briefly when approaching warning speed
Nearing speed limit
Beep on engine RPM
Beep on dangerous driving
Beep on unused seat belt
Seat belt unbuckled (repeated)
Beep on reversing
Server-based rules are customizable. The user can configure both the conditions that trigger the rule and the spoken feedback. To create custom feedback for a server-based rule, follow the steps below:
Navigate to Rules & Groups > Rules, from the navigation menu on the left.
Click Notification Templates, located at the top of the web page.
Click Add text template, located at the top of the web page.
For Name, write the name of the text template.
For Text, write the text the GO TALK will emit when the driver triggers a rule.
Click Save to save the text template.
To add custom feedback to the server-based rule, follow the steps below:
Navigate to Rules & Groups > Rules, from the navigation menu on the left. .
Click Add, located at the top of the web page.
Under the Notifications tab, click the Add driver feedback and select the GO TALK option.
For GO TALK, type the name of the text template in the box. You can click the box to open a drop down menu and select the recently created text template from the list.
Click Add to add the text template to the server-based rule, then click Save.
To take advantage of server-based rules in near-real-time, the IOX-GOTALK requires the use of Active Tracking on the ProPlus plan. To turn on Active Tracking:
Navigate to Vehicles & Assets, located in the navigation menu on the left.
Select the asset.
Select Settings from the top menu.
Scroll down to the Active Tracking and live server-side driver alerts toggle.
Toggle the option to On.
Once Active Tracking is on, the driver starts to receive near-real-time notifications for rules i.e. speeding and idling.
✱ NOTE: Enabling the Active Tracking option for any vehicle automatically turns on ProPlus billing for the device.
The IOX-GOTALK supports English, French, Spanish, German, and Italian. To set the language of the GO TALK, please follow the steps below:
Navigate to Vehicles and Assets, located in the navigation menu on the left.
Select a vehicle that has the GO TALK installed.
Select Audio feedback from the top menu.
Select your desired language under GO TALK language.
✱ NOTE: Once a language is selected, messages associated with device-based rules are spoken in the selected language. Create Notification templates for server-based rules in the selected language for the best results.
For the latest version of the Limitations of Use, please visit: goo.gl/k6Fp0w.
WARNING! Do not attempt to install, configure or remove any product from any vehicle while the vehicle is in motion or otherwise in operation. All installation, configuration or removal must be done only in stationary vehicles which are securely parked. Attempting to service units while being operated could result in malfunctions or accidents, leading to death or serious personal injury.
WARNING! All in-vehicle devices and related cabling must be securely fastened and kept clear of all vehicle controls, including gas, brake and clutch pedals. You must inspect devices and cabling on a regular basis to ensure all devices and cabling continue to be securely attached. Loose cabling or devices may impede the use of vehicle controls, resulting in unanticipated acceleration, braking or other loss of vehicle control, which could lead to death or serious personal injury. Improperly fastened in-vehicle devices may detach and impact operators upon sudden acceleration or deceleration, which may cause injury.
WARNING! If at any point after an in-vehicle device is installed a warning light illuminates on the vehicle dash or the vehicle stalls or has a marked drop in performance, shut off the engine, remove the device, and contact your reseller. Continuing to operate a vehicle with these symptoms can cause loss of vehicle control, and serious injury.
WARNING! Your in-vehicle devices must be kept clear of debris, water and other environmental contaminants. Failure to do so may result in units malfunctioning or short-circuiting that can lead to a fire hazard or vehicle damage or serious injury.
WARNING! Do not attempt to remove the devices from the vehicle in which they are originally installed for installation in another vehicle. Not all vehicles share compatibility, and doing so may result in unexpected interactions with your vehicle, including sudden loss of power or shutdown of the vehicle’s engine while in operation or cause your vehicle to operate poorly or erratically and cause death or serious injury and/or vehicle damage.
NOTICE: This product does not contain any user-serviceable parts. Configuration, servicing, and repairs must only be made by an authorized reseller or installer. Unauthorized servicing of these products will void your product warranty.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
✱ NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Changes or modifications not expressly approved by Geotab could void the user’s authority to operate the equipment.
CAN ICES-003 (B) / NMB-003 (B)
Wir besitzen keine Versand- und Lagerfläche in Deutschland und sind nicht von der Rücknahmepflicht nach § 17 ElektroG betroffen.