I have diagnostic data that is being sent to my Go 9 device via the IOX interface. I have a MyGeotab custom report that I'm using to interpret this data - how do I set up the report to just include the DiagnosticCodes that I'm interested in (in the range 36245 to 36296) and exclude any other DiagnosticCodes?
In MyGeotab I can see a section that allows me specify a diagnostic name but I can't see how I would specify a larger range of diagnostics here?
Many thanks
본문으로 바로가기
AHodk-1929
원글 작성자
대화에 참여하기
You need to be logged in to reply to this post and participate in the Geotab Community discussions.
답글 6개
Are those codes from the ECM itself or the telematics device
AHodk-1929
원글 작성자
@sjohnson-6023They are Geotab specific codes generated by a 3rd party piece of hardware which is connected to the Go9 IOX port.
@AHodk-1929 What is the 3rd party device?
AHodk-1929
원글 작성자
@sjohnson-6023 It's a hardware device being developed by vehicle TPMS provider (my client), they have already worked with Geotab to define the custom diagnostics ID above.
AHodk-1929
원글 작성자
This is a screen shot of where I'm trying to add the diagnostics. The UI doesn't really work when adding more than 1 code, why not provide a list of diagnostics that can be searched and then checked to select?
I could use the Geotab API to add a report programatically, even encapsulate those calls behind an AddIn button, but that seems like a bunch of work that I shouldn't need to do?
@AHodk-1929 There is not a way to select that and a report generated outside of on demand. I am not sure how many codes you are adding perhaps using a rule with the or criteria between each code. Then it would report exceptions that you can build a report or add notifications for alert.
여전히 궁금한 점이 있으신가요?