I have a 24Y1 harness installed, but it's detecting the ignition with only two wires.
This is affecting the unit's ignition detection.
Do you have any recommendations for a specific harness?
I have a 24Y1 harness installed, but it's detecting the ignition with only two wires.
This is affecting the unit's ignition detection.
Do you have any recommendations for a specific harness?
You need to be logged in to reply to this post and participate in the Geotab Community discussions.
Hey @OscarS-1828 ,
Thank you for asking your question in our community. Do you know what kind of ports the vehicle has? It should have a 9 pin port at least and use the HRN-GS09K2-A. Or a better better option is to use the rp1226 port with the harness HRN-CS14T2 (RP1226). If it has that port on it which it likely does.
Let us know if you have any other questions about this. We are here to help.
Have a good one!
Eishi FUN
Hey @OscarS-1828 ,
Thank you for asking your question in our community. Do you know what kind of ports the vehicle has? It should have a 9 pin port at least and use the HRN-GS09K2-A. Or a better better option is to use the rp1226 port with the harness HRN-CS14T2 (RP1226). If it has that port on it which it likely does.
Let us know if you have any other questions about this. We are here to help.
Have a good one!
Eishi FUN