What causes maintenance severity to go from low to medium?
編集済み EishiFUNによる
What causes maintenance severity to go from low to medium?
この投稿に返信したり、Geotabコミュニティのディスカッションに参加するには、ログインする必要があります。
Here is what I found (thanks Ace!):
1. Scheduled Maintenance
Hello @kevincampbell ,
Thank you for asking your question in our community. I want to make sure I'm referring to the same severity field, since MyGeotab uses severity in a few maintenance-related areas.
If you mean fault severity, it is normally determined by the fault code's definition and diagnostic mapping. A fault does not generally become more severe simply because it repeats. A new fault, a different fault code, or updated diagnostic information may cause the displayed severity to change.
If you mean the Maintenance Overview or a work request, that may use a separate risk or priority calculation based on factors such as recent severe faults, upcoming maintenance, predictive insights, or work-request priority.
The current maintenance documentation is available here:
- Maintenance overview (https://support.geotab.com/help/mygeotab/maintenance-and-diagnostics/maintenance/maintenance-overview)
- Engine faults related to telematics devices (https://support.geotab.com/help/mygeotab/maintenance-and-diagnostics/maintenance/engine-faults-related-to-telematics-devices)
If you can share the page or report where you see “Low” changing to “Medium,” I can narrow down the exact rule being applied.
Hope that helps!
Eishi FUN
Here is what I found (thanks Ace!):
1. Scheduled Maintenance