Salta al contenuto principale

Which harness should I use with an FL360 2024 unit?

OscarS-1828
Locandina originale

I have a 24Y1 harness installed, but it's detecting the ignition with only two wires.

 

This is affecting the unit's ignition detection.

 

Do you have any recommendations for a specific harness?

Partecipa alla conversazione

Per rispondere a questo post e partecipare alle discussioni della community di Geotab è necessario aver effettuato l'accesso.

Risposte migliori

EishiFUN
Amministratore della comunità

Hey @OscarS-1828​ ,

 

Thank you for asking your question in our community. Do you know what kind of ports the vehicle has? It should have a 9 pin port at least and use the HRN-GS09K2-A. Or a better better option is to use the rp1226 port with the harness HRN-CS14T2 (RP1226). If it has that port on it which it likely does.

 

Let us know if you have any other questions about this. We are here to help.

 

Have a good one!

Eishi FUN

1 Rispondi

EishiFUN
Amministratore della comunità

Hey @OscarS-1828​ ,

 

Thank you for asking your question in our community. Do you know what kind of ports the vehicle has? It should have a 9 pin port at least and use the HRN-GS09K2-A. Or a better better option is to use the rp1226 port with the harness HRN-CS14T2 (RP1226). If it has that port on it which it likely does.

 

Let us know if you have any other questions about this. We are here to help.

 

Have a good one!

Eishi FUN

Hai ancora domande?