Take a preventative step toward avoiding restricted roads and toll costs by using Geotab Navigation in the Drive App. Using Geotab Navigation helps ensure your drivers are always on the most efficient path by allowing them to configure vehicle-specific settings like truck dimensions and Hazmat requirements. In this video, learn how to use Geotab Navigation in the Drive App.

Video

Beginner

Geotab Drive

Using Geotab Navigation

Geotab Navigation! Let's get started. Tap Navigation. Tap the gear icon to configure your vehicle type. This only needs to be done at the start of your workday; the settings will apply to all Navigation selections for the duration of the workday session. A menu appears for selecting the type of vehicle to set up. Let's start by selecting Truck Safe. Navigation Settings for Truck Safe appear. Note that truck settings must always be configured. This information is not set by default based on your chosen vehicle in the Drive app. Enable Hazmat Safe Route if you are transporting hazardous material. Toggle on Avoid Tolls to skip toll routes. Indicate Truck Settings in the fields provided. Remember, this information is not set by default based on your chosen vehicle in the Drive app. Select kilometers or miles. Tap Save. Remember, this only needs to be done at the start of your workday; the settings will apply to all Navigation selections for the duration of the workday session. Let's review the Navigation Settings for Car. Toggle on Avoid Tolls to skip toll routes. Select kilometers or miles. Tap Save. Remember, this only needs to be done at the start of your workday; the settings will apply to all Navigation selections for the duration of the workday session. Enter a destination address in the search field and select the appropriate location from the results. Or, tap a destination on the map. Tap Go to launch route directions. Or, tap cancel to reset and input an alternate address. Congratulations! You've completed this tutorial for how to use Geotab Navigation.

Transcription vidéo