Passer au contenu principal

Which harness should I use with an FL360 2024 unit?

OscarS-1828
Affiche originale

I have a 24Y1 harness installed, but it's detecting the ignition with only two wires.

 

This is affecting the unit's ignition detection.

 

Do you have any recommendations for a specific harness?

Joindre la conversation

Vous devez être connecté pour répondre à ce message et participer aux discussions de la communauté Geotab.

Meilleures réponses

EishiFUN
Administrateur de communauté

Hey @OscarS-1828​ ,

 

Thank you for asking your question in our community. Do you know what kind of ports the vehicle has? It should have a 9 pin port at least and use the HRN-GS09K2-A. Or a better better option is to use the rp1226 port with the harness HRN-CS14T2 (RP1226). If it has that port on it which it likely does.

 

Let us know if you have any other questions about this. We are here to help.

 

Have a good one!

Eishi FUN

1 Réponse

EishiFUN
Administrateur de communauté

Hey @OscarS-1828​ ,

 

Thank you for asking your question in our community. Do you know what kind of ports the vehicle has? It should have a 9 pin port at least and use the HRN-GS09K2-A. Or a better better option is to use the rp1226 port with the harness HRN-CS14T2 (RP1226). If it has that port on it which it likely does.

 

Let us know if you have any other questions about this. We are here to help.

 

Have a good one!

Eishi FUN

Avez-vous toujours des questions?