It looks like you can do it via the Bulk Edit Add-in. I'd recommend checking that out if you've got a lot of keys to update.

Sinun täytyy kirjautua sisään vastataksesi tähän viestiin ja osallistuaksesi Geotab-yhteisön keskusteluihin.
It looks like you can do it via the Bulk Edit Add-in. I'd recommend checking that out if you've got a lot of keys to update.

Sorry--- Submitted before asking my question-I have a customer who would like to know if there is a way to Bulk edit IOX NFC Reader Hardware instead of removing/editing individually. I know we have Bulk edit capability, but was not sure if it could be used with the IOX product. I didnt see anything but did not look for too long in the forums --Thanks in advance!
Hello @Acarstensen-1553
Since IOX NFC is a parameter on the GO device, something that might help would be to go to the parameters and remove it from there.
1.- Go to Assets, select the checkbox in the blank chart by ticking it. Once all visible assets are selected, you will see Edit; click there.
2.- Once inside this menu you will see 2 tables "active" and "device and settings".
3.- Select the device and assets.
4.- Once inside you will see "show advanced settings" click here.
5.-Once the new menu opens, you will see customized parameters at the bottom; select replace settings.
6.-There you will be able to add or remove parameters for the devices, if the option is available.
It looks like you can do it via the Bulk Edit Add-in. I'd recommend checking that out if you've got a lot of keys to update.
