Gå til hovedindhold

Feedback: Video event map

JesseA-6619
Originalplakat

Some feedback for the videos that show up for Road Adjustment Suggested. When you select the video to look closer, the map at the bottom does not show the actual location (only displays 0,0). It would be ideal to have consistency across all recorded events. Bruger uploadet billede 1

Deltag i samtalen

Du skal være logget ind for at svare på dette indlæg og deltage i Geotab Community-diskussionerne.

Top svar

@JesseA-6619 - that sounds like a good amount. I think it may be a camera issue, I'd call your reseller and ask them to open a trouble ticket.

9 Svar

What camera is it? Is the GO device currently reporting?

JesseA-6619
Originalplakat

@sjohnson-nynjflnv GO Focus Plus, and yes!

@JesseA-6619 That is interesting as 0,0 is usually the lat long when there is no GPS latch from the device. Can you check in Engine and Measurements, under this device (GO), measurements, see how many satellites it is latching to.

JesseA-6619
Originalplakat

@sjohnson-nynjflnv It's latched onto up to 20 satellites today, and at the time of this trip the number was about 10.

@JesseA-6619 - that sounds like a good amount. I think it may be a camera issue, I'd call your reseller and ask them to open a trouble ticket.

This Could Possibly be an interface bug, or software has detected a discrepancy between the map's recorded speed limit or road geometry and actual driving behaviors. I would reach out to your installer or Geotab directly. I will look into this more, I included a photo of what my data base looks like. You can also possibly try to move the camera/ recalibrate it.Bruger uploadet billede 1

@DakotaDagostino GFP is supposed to self calibrate and location at 0,0 is a satellite latch issue.

Can you get data on the physical behavior of the Gofocus camera? I mean the behavior of the LED.

Hi Jesse, is there any unusual behavior with the LED on the GO Focus?

Har du stadig spørgsmål?