Hello <a data-id="11813" data-value="georgeumukoro" data-denotation-char="@" href="/user/georgeumukoro" class="text-decoration-none mention">@georgeumukoro</a> , Thank you for asking your question in our community. There is a not a specific option for past 2 months but you can use the custom option to go back to whatever date you want to see the report from. If you have the specific report I can give you more instructions on how to pull it for the custom time frame. Have a great day! Eishi FUN

Geotab report

Remove or unenroll an asset from tm the CARB report while rejected.

Hi <a data-id="6175" data-value="DONG-6175" data-denotation-char="@" href="/user/dong-6175" class="text-decoration-none mention">@****-6175</a> The exceptions directly depend on the configuration of the rules and are only considered applied events, whereas in risk management it covers all events

What is the difference between idling time (risk management) and idling time (exceptions)?

Hi I also tried to do something similar. The possible solution they gave me at the time was the maintenance report since we depend on the data of the type of oil used.

Oil Life Monitoring Report

<a data-id="1044" data-value="EishiFUN" data-denotation-char="@" href="/user/eishifun" class="text-decoration-none mention">@EishiFUN</a> Thank you very much, I already found the report

Maintenance message report

Fuel level report

Hi <a data-id="3712" data-value="CElvi-3712" data-denotation-char="@" href="/user/celvi-3712" class="text-decoration-none mention">@CElvi-3712</a> , great questions — happy to help point you in the right direction before you request access! How many stops can be programmed for a planned route? From what I have found I havent been able to confirm a hard limit. I assume there has to be some limit even if it is something crazy like 1000. I dont think it is something you need to worry about but I can look more into it if you are running into limit issues. What does the report look like? There are two built-in reports for planned routes: 1. Planned vs. Actual Route Report — compares your planned route against what the driver actually did, showing missed stops, early&#x2F;late arrivals, and any unplanned stops. You can view it directly in MyGeotab, download it, or see a map overlay of planned vs. actual. 2. Unmatched Route Report — shows driving that fell outside any planned route. Resources to help you get a feel for the feature before requesting access: - Planned routes — setup and overview with screenshots (https:&#x2F;&#x2F;support.geotab.com&#x2F;help&#x2F;mygeotab&#x2F;fleet-activity&#x2F;routes&#x2F;planned-routes) - Route reports — what they show and how to access them (https:&#x2F;&#x2F;support.geotab.com&#x2F;help&#x2F;mygeotab&#x2F;reports&#x2F;productivity-reports&#x2F;route-reports) - Geotab Academy — Routes (https:&#x2F;&#x2F;support.geotab.com&#x2F;geotab-academy&#x2F;all-resources?searchTerm=routes) — videos and walkthroughs showing the feature in action in MyGeotab Feel free to reach out if you have any other questions — we are here to help. Have a great day! Eishi FUN

Planned Route Reports

<a data-id="1044" data-value="EishiFUN" data-denotation-char="@" href="/user/eishifun" class="text-decoration-none mention">@EishiFUN</a> Thanks, I'll be following the steps.

There are communication status reports for Gofocus cameras.

<a data-id="1351" data-value="CristianHernndez-1351" data-denotation-char="@" href="/user/cristianhernndez-1351" class="text-decoration-none mention">@CristianHernndez-1351</a> Thank you

Reports

I've recently modified a report template and tried to upload it as a new report but I keep hitting the error message "The report template must be saved using Microsoft Excel".The template is definitely in .xlsx format (I've saved using both MS Excel online and also in Libre Office -&gt; Save as .xlsx) so I'm wondering if there is some way of getting further information into the problem with my template e.g. can you point me at the validator you are using?I've previously has no problems modifying templates and uploading like this so any help would be gratefully received.Many thanks

MyGeotab Error: The report template must be saved using Microsoft Excel

How to pull up video from a certain date

Hello guys, we are using ignition on/off data from the Advanced Engine Status Report for calculations of engine hours per each day. The column/header support document does state that location data is not available for this type of report. How can we somehow get this data instead of downloading trips report separately. The customer would like a unified report which she is currently getting from the competitor's platform:assetdateengine hours per dayfirst location of the daylast location of the day Thank you for insights!